Ref | Description | Quant
319 | Canopy | 1
320 | Blade | 4
321 | Motor frame | 4
322 | Gear | 4
323 | Main frame | 1
324 | Protective ring | 1
325 | Battery cover | 1
326 | Support for light | 4
327 | Snap joint | 4
328 | Foam fix part | 4
329 | Copper bush | 8
----- | PCB | 1
331 | Steel tube | 4
332 | Copper bush for gear | 4
333 | Li-po battery | 1
334 | Motor | 4
335 | Tail frame | 4
This model can be equipped with a camera. If your model
doesn't include it, you can find it from your retailer or on
www.wltoys.eu. The camera is installed as explained under
module. You can install the SD card by pushing it in the rear slot
until you hear a click. To take out, press again till it is pushed
out.
To take a picture press the foto button. To record a video press
the video button. Make sure to start AND stop your video
recording. When it is not stopped the recording will not be saved
propperly.
Your camera comes with a USB stick. Insert the SD card into
the USB and then insert into a computer USB slot.
On your computer open de folder of the USB drive. You will find
the follwing folders:
PHOTO > Contains all photo images
VIDEO > Contains all video's
Imported by: WLtoys.eu / DroneX BV
Bloemstraat 86HS 1016 LE Amsterdam | www.wltoys.eu |
info@wltoys.eu
Our products comply with the standards and criteria of the
European Union and approved by the EC. For your safety, we
recommend that you read the entire manual before your first
flight.
