3
GENERAL
INFORMATION
To ensure you get the very best from your new Worcester
Greenstar oil boiler, please read these notes and instructions
carefully.
ELECTRICAL CONNECTION
A mains cable should be connected to a double pole isolator
with a contact separation of 3 mm on all poles and supplying the
appliance and controls only.
The mains supply for your boiler is 230/240 volts AC-50Hz.
Your boiler must be earthed and protected by a 5-amp fuse.
ROOM-SEALED BALANCED FLUE
Air for your boiler is supplied via the balanced flue terminal,
and no other air supply is required, except for ventilation if the
boiler is installed in a cupboard or compartment.
ROUTINE MAINTENANCE
It is essential that your boiler is installed and serviced by a
competent heating engineer, and Worcester Heat Systems will be
pleased to arrange regular servicing and a comprehensive
maintenance contract.
Servicing should be carried out at least once a year for your
boiler which burns 28-second kerosene.
SERIAL NUMBER
Your boiler serial number and model number should always
be quoted in any contact with Worcester Heat Systems. This will
help identify spare parts and also avoid confusion and delays
during any service call-out. You will find these numbers on the
serial number label which is located on the appliance electrical
panel, which can be seen when you lift off the top panel.
