Bedienungsanleitung Worx Landroid M - WG754 (Seite 13 von 16) (Englisch)

641663

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Lawn Mowing Robot EN

7.2 Keep it clean

WARNING: Before cleaning turn your Landroid

OFF. Put on protective gloves before cleaning the

Blade Turning Disc (13) and do not use running water.

(See Fig. L)

A. Cleaning the body

Your Landroid

M will live a much happier and longer life if it is

cleaned regularly. Although, as your Landroid

M is an electric

machine, you will need to take care when cleaning, so DO NOT use

a hose, high pressure washers or otherwise pour running water on

your Landroid

M, it is best to use a spray bottle filled with water.

When cleaning the machine body use a soft brush or clean cloth and

avoid using solvents or polishes (See Fig. L). Lastly, make sure that

you remove all build up of grass clippings and debris.

B. Cleaning the Underside

Again, it is important that you power the Landroid

M OFF using the ON/Off Button and wear protective gloves

before touching the Blade Turning Disc (13).

First, flip your Landroid

M upside down to expose its underside. Here you will see the Blade Disc, the chassis, and the

Front Wheel (15) and Driving Wheel(10). Clean everything thoroughly with a soft brush or moist rag. Rotate the Blade Disc

to ensure it rotates freely. Check the blades spin freely around the fixing screws. Remove any obstructions.

IMPORTANT: Remove any lodged debris so that it does not cause a crack in the Blade Disc. Even the

tiniest crack can decrease your Landroid

M's mowing output.

C. Clean the contact pins and the charging strips

Clean the Contact Pins (3) located on the Charging Base (4) and the Charging Strip (5) located on the Landroid

M using a

cloth. Remove any build up of grass clippings and debris around the contact pins and charge strips periodically to ensure

the Landroid

M successfully charges each time.

7.3

Battery life

The heart of the Landroid

M is its 28-volt lithium-ion battery. No maintenance is required. For proper storage of the battery,

make sure it is fully charged in kept in a cool dry place between (20°C-60°C).

The life-span of the Landroid

M’s battery depends on various factors, such as:

• The time span of the mowing season in your region.

• Amount of hours the Landroid

M mows per day.

• Battery maintenance during storage.

Landroid

M can be charged manually without the boundary wire.

To manually charge the battery without connecting the boundary wire to the charging base;

1. Connect the Charging Base to a suitable power supply.

2. Manually dock the Landroid

M into the Charging Base while the Landroid

M is powered off.(See

Fig. M1)

3. The charging base red light will turn on.

4. While “charging” is shown on the screen.(See Fig. M2) Landroid

M will begin to charge.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx Landroid M - WG754 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Worx Landroid M - WG754

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info