Bedienungsanleitung Worx WX290 (Seite 5 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

673232

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Lithium-Ion Cordless Impact Driver EN

1. FORWARD/ REVERSE ROTATION

CONTROL

2. SOFT GRIP HANDLE

3. BATTERY PACK RELEASE BUTTON

4. BATTERY PACK*

5. ON/OFF SWITCH WITH VARIABLE SPEED

CONTROL

6. LED LIGHT

7. COLLECT LOCKING SLEEVE

* Not all the accessories illustrated or

described are included in standard delivery.

TECHNICAL DATA

Type WX290 WX290.1 WX290.9 (2-

designation of machinery, representative of

Cordless impact driver)

WX290 WX290.1 WX290.9

Rated voltage 20V

Max**

Nominal voltage 18V

No-load speed 0-2500/min

Impact rate 0-3000bpm

Max torque 107N.m

Chuck size 1/4”(6.35mm)

Machine weight 1.2kg 0.83kg

** Voltage measured without workload. Initial battery

voltage reaches maximum of 20volts. Nominal

voltage is 18volts.

NOISE DATA

A weighted sound pressure L

: 76dB(A)

A weighted sound power L

: 87dB(A)

3.0dB(A)

Wear ear protection when

sound pressure is over

80dB(A)

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined

according to EN 60745:

Typical

weighted

vibration

Vibration emission value a

= 9.37m/s

Uncertainty K = 1.5m/s²

The declared vibration total value may be used for

comparing one tool with another, and may also be

used in a preliminary assessment of exposure.

WARNING: The vibration emission value

during actual use of the power tool can differ

from the declared value depending on the ways in

which the tool is used dependant on the following

examples and other variations on how the tool is

used:

How the tool is used and the materials being cut or

drilled.

The tool being in good condition and well

maintained

The use the correct accessory for the tool and

ensuring it is sharp and in good condition.

The tightness of the grip on the handles and if any

anti vibration accessories are used.

And the tool is being used as intended by its design

and these instructions.

This tool may cause hand-arm vibration

syndrome if its use is not adequately

managed.

WARNING: To be accurate, an estimation of

exposure level in the actual conditions of use

should also take account of all parts of the

operating cycle such as the times when the tool is

switched off and when it is running idle but not

actually doing the job. This may signiﬁcantly reduce

the exposure level over the total working period.

Helping to minimise your vibration exposure risk.

ALWAYS use sharp chisels, drills and blades

Maintain this tool in accordance with these

instructions and keep well lubricated (where

appropriate)

If the tool is to be used regularly then invest in anti

vibration accessories.

Avoid using tools in temperatures of 10°C or less

Plan your work schedule to spread any high

vibration tool use across a number of days.

ACCESSORIES

WX290 WX290.1 WX290.9

2.0Ah Battery pack

(WA3551.1)

1 1 /

16V/20V 2A charger

WA3860

1 / /

20V 400mA charger

WA3760

/ 1 /

Screwdriver bit

(50mm PH2)

1 1 1

We recommend that you purchase your accessories

from the same store that sold you the tool.Refer to

the accessory packaging for further details. Store

personnel can assist you and offer advice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX290 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info