Bedienungsanleitung Worx WX693.9 (Seite 5 von 76) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

673156

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Oscillating Tool EN

HYPERLOCK™ ACCESSORY CLAMPING LEVER

2. ON/OFF SWITCH

3. VARIABLE SPEED DIAL

4. VENTING SLOTS

5. UNIVERSAL-FIT

™

ACCESSORY INTERFACE*

6. SMALLER FLANGE (FOR OTHER BRANDS’

SANDING PADS)

7. FLANGE

* Works with other oscillating tool brands’ accessories.

The following compatible brands are trademarks

owned by third parties which may be registered by

their respective owners: Black & Decker

, Bosch

Chicago Electric

, Craftsman

, Dremel

, Fein

Genesis

, Makita

, Mastercraft

, Milwaukee

Performax

, Porter Cable

, Ridgid

, Ryobi

, Skil

, and

Tool Shop

Not all the accessories illustrated or described

are included in standard delivery.

TECHNICAL DATA

Type WX693 WX693.9 (6-designation of

machinery, representative of high frequency

oscillation tool)

WX693 WX693.9

Voltage 20V

Max**

Oscillations speed 8000-18000 /min

Oscillation angle 4°

Battery capacity 2.0Ah

Charging time 1hr /

Machine weight

1.3kg 1.0kg

** Voltage measured without workload. Initial battery

voltage reaches Maximum of 20 volts. Nominal

voltage is 18 volts.

NOISE INFORMATION

A weighted sound pressure L

: 76dB(A)

A weighted sound power L

: 87dB(A)

3.0dB(A)

Wear ear protection when sound

pressure is over

80dB(A)

VIBRATION INFORMATION

Vibration total values (triax vector sum) deter-

mined according to EN 60745:

Typical weighted

vibration

Vibration emission value

ah = 3,57m/s

Uncertainty K = 1.5m/s²

The declared vibration total value may be used for

comparing one tool with another, and may also be

used in a preliminary assessment of exposure.

WARNING: The vibration emission value

during actual use of the power tool can differ

from the declared value depending on the ways in

which the tool is used dependant on the following

examples and other variations on how the tool is

used:

How the tool is used and the materials being cut or

sanded.

The tool being in good condition and well

maintained.

The use the correct accessory for the tool and

ensuring it is sharp and in good condition.

The tightness of the grip on the handles and if any

anti vibration accessories are used.

And the tool is being used as intended by its design

and these instructions.

This tool may cause hand-arm vibration

syndrome if its use is not adequately

managed.

WARNING: To be accurate, an estimation of

exposure level in the actual conditions of use

should also take account of all parts of the operating

cycle such as the times when the tool is switched off

and when it is running idle but not actually doing the

job. This may signiﬁcantly reduce the exposure level

over the total working period.

Helping to minimise your vibration exposure risk.

ALWAYS use sharp chisels, drills and blades.

Maintain this tool in accordance with these

instructions and keep well lubricated (where

appropriate)

If the tool is to be used regularly then invest in anti

vibration accessories.

Avoid using tools in temperatures of 10°C or less

Plan your work schedule to spread any high vibration

tool use across a number of days.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX693.9 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info