714305
23
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
23
FAQs
Questions Solutions
The screen is not displayed Turn off the power source and remove the power cable; reinsert the power cable and restart the machine.
The Android system crashes Turn off the power source and remove the power cable; reinsert the power cable and restart the machine.
There is a screen display error Turn off the power source and remove the power cable; reinsert the power cable and restart the machine.
The remote is missing or not paired
Turn off the power source and disconnect the power cord. Reinsert the power cord after waiting for five
minutes, and the system will restart automatically. Re-pair the remote control after the system has restarted.
The system will automatically turn itself off after
an overheating warning
Check that there are no obstacles impeding the system's ventilation holes to ensure that the cooling flow can
proceed normally. Restart the machine according to the method above.
How do I restore factory settings?
Go to the Setup screen and select Restore from General settings. Confirm whether you want to keep installed
applications and then perform the reset.
How do I adjust the focus?
Enter Settings > Image Settings, and then find Electric Focusing. Press on the left and right buttons on the
remote control to adjust the focus. Release when the image is being clearly displayed on the screen or wall.
How can I avoid distortions at the top of the
image?
The lens' widest angle projects onto the top of the screen and so any unevenness in this area may have
an outsized bending effect on the projection. It can be estimated that around 1mm of unevenness in the
receiving screen or wall will cause a 3mm bending effect. A projection curtain would be recommended.
How do I use the Keystone Correction system?
1) You should see the Keystone Correction screen when you first turn on the projector or go to Settings. The
cursor's presence at a given point indicates that it can be moved "up-down-left-right " from the current
location to ensure that a 16:9 rectangle is maintained.
2) The projector should be positioned at right angles as much as possible to the screen for an optimal
projection effect. The image lines will be uneven if the projector is not lined up vertically with the wall
or screen. Uneven lines may be revised using Keystone Correction, which can help maintain a standard
rectangular screen.
3) The projector uses digital Keystone Correction software, that is, the corrections are calculated and
performed by software.
How can I improve the Bluetooth Remote's
voice input's ability to understand me?
1) Use Mandarin when issuing commands by voice input;
2) Try disconnecting and then re-pairing the Bluetooth.
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Xiaomi Mi Laser Projector 150 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Xiaomi Mi Laser Projector 150

Xiaomi Mi Laser Projector 150 Bedienungsanleitung - Deutsch - 18 seiten

Xiaomi Mi Laser Projector 150 Bedienungsanleitung - Holländisch - 13 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info