496993
43
Zoom out
Zoom in
Vorherige Seite
1/122
Nächste Seite
ENG-13
English
Connecting to a TV set
CONNECTIONS
Turn off the power and unplug both units before setting up any connections.
Connecting TV through HDMI
1. Connect the HDMI OUT terminal on the rear of the Blu-ray disc player to the HDMI IN terminal of
your TV with a HDMI cable (not included).
2. Select HDMI as input source with your TV remote control until the HDMI signal from the Blu-ray
disc player appears on your TV screen.
3. After detected that HDMI jack has been connected, the unit will use the HDMI jack to output video
signal automatically, and the display screen of the unit will be blue screen at the same time. You can
shut down the upper cover to turn off the sound of the unit.
Notes:
Please refer to page 27 for HDMI settings in setup menu.
Depending on your TV, some HDMI output resolutions may not work. Please refer to the
user‘s manual of your TV.
Connecting TV through AV Out
Connect the AV OUT terminals on the unit to the AV IN terminals of your TV with an AV cable (not
included).
Shut down the upper cover to start the video output and turn off the sound of the unit.
Notes:
If your TV set supports HDMI, please select HDMI jack first.
The video output resolution should always be 480P (PAL) if you select this connection mode
and shut down the upper cover. You need not to set the resolution in Setup menu anymore.
Connect the USB device to the unit or insert a SD card in to the SD Card jack.
Notes:
Don't pull out the USB device or the SD card from the unit when the USB device or SD card is
in use.
Don't pull out the USB device or power off the USB device during BD-J discs playback.
The Blu-Ray Player can read and write to FAT32 file system. NTFS-Files system is read only.
You need a Storage Device with FAT32 File System to use the BD-Live function.
Connecting to USB storage/ SD Card
43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Xoro HBD 1000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info