478500
48
Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
Page 46 FT-897D OPERATING MANUAL
MEMORY OPERATION ON “HOME”
CHANNEL MEMORIES
Four Special one-touch “Home” channels are available, for
special frequencies you use often. Either “simplex” or “split”
frequency/mode data may be stored in the “Home” channel
locations. Special “Home” channels are available for HF
(any frequency between 1.8 and 29.7 MHz), 50 MHz, 144
MHz, and 430 MHz.
These memories may prove particularly useful for monitor-
ing propagation beacons, providing one-touch recall of the
beacon frequency for a quick check of band conditions.
HOME Channel Storage
1. Tune the desired frequency, and set the operating mode.
If this is an FM channel, set up any required CTCSS/
DCS and repeater shift configurations.
2. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row
“b”
[
MW, SKIP, TAG
]
appears on the display.
3. Press the
[
A
](
MW
)
key momentarily to enter the
“Memory Check” mode.
4. Press and hold in the HOME key for one second. This
stores the frequency data into the “Home” channel loca-
tion. As usual, you will hear a double beep to confirm
the successful storage of the frequency data.
5. If you wish to store a “Split” frequency pair into the
“Home” channel, store the Receive frequency as in steps
1 ~ 4 above. Now set the desired Transmit frequency.
Once more, press the
[
A
](
MW
)
key momentarily. Press
and hold in the microphone’s PTT switch; while hold-
ing the PTT switch, again press and hold in the HOME
key for one second. This stores the transmit frequency
data into the “Home” channel location.
HOME Channel Recall
1. Press the HOME key momentarily to recall the Home
Channel on the band group where you currently are op-
erating (HF, 50 MHz, 144 MHz, or 430 MHz). The
HOME” indication will appear on the display.
2. Press the HOME key once more to return to the previ-
ously-used frequency (either a VFO frequency or a
memory channel).
LABELING MEMORIES
You may wish to append an alpha-numeric “Tag” (label) to
a memory or memories, to aid in recollection of the channel’s
intended use (such as a club name, etc.). This is easily ac-
complished using the Menu mode.
1. Recall the memory channel onto which you wish to ap-
pended a label.
2. Press and hold in the
[
F
]
key for one second to enter the
Menu mode.
3. Rotate the MEM/VFO CH knob to recall Menu Mode
No-056
[
MEM TAG
]
.
4. Press the MEM/VFO CH knob to enable the program-
ming of the label.
5. Rotate the DIAL knob to select the first character (as
shown below) in the name you with to store, then rotate
the MEM/VFO CH knob clockwise to move to the next
character.
6. Again rotate the DIAL knob to select the next number,
letter, or symbol, then rotate the MEM/VFO CH knob
clockwise to move to the next characters slot.
7. Repeat step 6 as many times as necessary to complete
the name tag for the memory, then press and hold in the
[
F
]
key for one second to save the A/N (Alpha-Numeric)
name entry and exit to normal operation.
8. During Memory operation, press the
[
F
]
key momen-
tarily, then rotate the MEM/VFO CH knob, as needed,
until Multi Function Row “b”
[
MW, SKIP, TAG
]
appears
on the display. Press the
[
C
](
TAG
)
key momentarily to
activate the alpha-numeric Tag. Repeatedly pressing this
key will toggle operation between “Frequency” display
and “Tag” display.
MEMORY OPERATION
“Frequency” Display “Tag” Display
You can recall Menu Mode No-056 [MEM
TAG] instantly by pressing and holding in the
[C](TAG) key for one second.
48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT-897D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info