478500
51
Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
Page 49FT-897D OPERATING MANUAL
Scan Skip Programming (Memory Mode Only)
Among the memories you have programmed, there may be
some stations which you do not wish to scan. For example,
broadcast signals (which are transmitted continuously) will
cause the scanner to stop, and such channels may be skipped
so as to avoid this inconvenience.
To remove a channel from the scanning loop:
1. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row
“b”
[
MW, SKIP, TAG
]
appears on the display.
2. Recall the memory channel to be skipped.
3. Press the
[
B
](
SKIP
)
key momentarily. The “hyphen” in
the memory channel number will change to become a
“dot;” this shows that this channel now is not included
in the scanning loop.
“PRIORITY CHANNEL” SCANNING
The FT-897Ds scanning features include a two-channel
scanning capability which allows you to operate on a VFO
or Memory channel, while periodically checking a Memory
Channel “M-001” for activity. If a station is received on the
Memory Channel “M-001” which is strong enough to open
the Squelch, the scanner will pause on that station in accor-
dance with the Scan-Resume mode set via Menu Mode No-
078
[
SCAN RESUME
]
. See page 62.
Here is the procedure for activating Priority Channel Dual
Watch operation:
1. Rotate the SQL control until the background noise is
just silenced, then store the frequency to be the “Prior-
ity” channel into the Memory Channel “M-001.”
2. Set the FT-897D for operation on another memory chan-
nel, or on a VFO frequency.
3. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row
“g”
[
SCN, PRI, DW
]
appears on the display.
4. Press the
[
B
](
PRI
)
key momentarily to start the “Prior-
ity” monitoring (the “ ” icon will appear at the upper of
the frequency display). During Priority monitoring, the
displayed frequency will shift to the
Priority memory briefly about five
seconds, while the receiver check for
the presence of a signal.
5. When no signal appears on the Priority memory (i.e. the
squelch remains closed), you can tune, transmit and re-
ceive on the VFO, or select and operate on other memo-
ries.
6. If a station you wish to talk with appears on the Priority
channel, press the PTT switch momentarily while re-
ceiving their signal (no transmission will occur) to halt
Priority scanning. Otherwise, when a signal appears on
the Priority channel, Priority monitoring will just pause
on the channel. Priority monitoring will resume.
7. To cancel Priority monitoring, press again the
[
B
](
PRI
)
key.
SCANNING OPERATION
4. Repeat steps 2 and 3 as many times as necessary to skip
all the channels you do not wish to scan.
5. Initiate memory scanning; you will observe that the chan-
nels you marked to be skipped are not included in the
scanning loop.
6. Press the PTT switch to stop the scan; you may now use
the MEM/VFO CH knob to step through the channels
manually - one at a time - and you will observe that the
“Skipped” channels are, nonetheless, available for re-
call by manual means.
7. You may restore a previously-skipped channel to the
scanning loop by selecting the channel manually, then
pressing the
[
B
](
SKIP
)
key momentarily so that the “dot”
changes to become a “hyphen.”
Memory Skip “OFF” Memory Skip “ON”
SCANNING FEATURES
51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT-897D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info