674740
80
Zoom out
Zoom in
Vorherige Seite
1/154
Nächste Seite
Page 78
FT-991 OperaTing Manual
cw MoDe operation
uSing the built-in electronic keyer
Connect the cable from your keyer paddle to the front panel
KEY
jack.
1. Press the
MODE
button, then touch
[
CW-LSB
]
or
[
CW-USB
]
on the TFT LCD display. The “
C-L
or “
C-U
icon will appear in the display. The CW
monitor is activated.
MULTI Knob
MODE Button
F(M-LIST) Button
2. Rotate the Main Tuning Dial knob to select the de-
sired operating frequency.
3. Press the
F(M-LIST)
button, then touch
[
KEYER
]
on the LCD to select “
ON
to conrm that the built-
in Electronic Keyer is now active.
4. Touch
[
SPEED
]
on the LCD, then rotate the
MULTI
knob to set the desired sending speed (4 - 60 WPM).
Advice:
Rotate the
MULTI
knob to display the keying
speed (4 - 60 WPM) below the
[
SPEED
]
indica-
tor.
By pressing either the “Dot” or “Dash” side of
the paddle, the CW keying tone will automati-
cally be generated.
5. Touch
[
BK-IN
]
on the TFT display to engage auto-
matic activation of the transmitter when either the
“Dot” or “Dash” side of the paddle is pressed. The
Break-in will be set to “
ON
”.
6. CW operation utilizing the CW paddle may now
commence.
Advice:
When the keyer paddle is pressed, the transmitter
will automatically be activated, and the CW charac-
ters (or a string of dots or dashes) will be transmit-
ted. When the keyer paddle is released, transmission
will cease, and after a brief delay, reception will be
restored. The delay time is user-programmable, per
the discussion on page 83.
The CW sidetone audio level may be set using
“MONITOR” (see page 72).
If [
BK-IN
] is set to “
OFF
”, you may practice sending
CW with the sidetone only, without having the signal
go out over the air. (Press the front panel
F(M-LIST)
button to reveal the functions list on the TFT display ).
If the transmitter power is reduced via [
RF PWR
]
function, the ALC meter reading will increase; this
is normal and does not indicate any problem whatso-
ever (because increased ALC voltage is being used
to lower the power).
The keying operation may also be enabled in LSB/
USB mode to send the CW signal via the Menu item
055 CW AUTO MODE
” without switching to CW
mode.
The same frequency may be displayed when switch-
ing between SSB mode and CW mode by setting
Menu item “
059 CW FREQ DISPLAY
”.
By connecting a computer, CW can be operated us-
ing free or commercially available software and set-
ting Menu item “
060 PC KEYING
”.
The electronic keyer operation mode can be changed
via the Menu item “
012 KEYER TYPE
”.
80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT-991 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info