674740
120
Zoom out
Zoom in
Vorherige Seite
1/154
Nächste Seite
Page 118 FT-991 OperaTing Manual
exAMple oF dAtA coMMunicAtionS device
Use commercial or free computer software for PSK data communications. See the illustration below for connecting the
FT-991
transceiver to a computer.
Be sure to read the instruction manual of the interface device to be connected to the radio and computer.
Data (psk) operation
DATA-AFSK
(PSK, OLIVIA, CONTESTIA, RTTY etc.)
FT-991 Settings
1. Press the
MODE
button, and then touch the corre-
sponding key on the LCD to select the USB operat-
ing mode. The “
USB
” icon appears in the display.
Advice:
USB is the conventional mode for AFSK transmis-
sion on all bands, however some users may be using
LSB.
2. Press the
F(M-LIST)
button to display the function
list.
3. Touch
[
MONI
]
on the LCD. The Monitor function
will be set to “ON”. The
MULTI
knob will function
as the MONITOR adjustment knob.
4. Press the
MENU(SETUP)
button. The Menu list
will appear in the display.
5. Rotate the
MULTI
knob to select Menu item
110
SSB PTT SELECT
”. Touch
[
SELECT
] on the LCD,
then rotate the
MULTI
knob to set this Menu item to
RTS
”. Touch
[
ENTER
]
on the LCD.
6. Rotate the
MULTI
knob to select Menu item
111
SSB PORT SELECT
”. Touch
[
SELECT
]
on the
LCD, then rotate the
MULTI
knob to set this Menu
item to “
USB
”. Touch
[
ENTER
]
on the LCD. Press
the
MENU(SETUP)
button or touch
[
BACK
]
on the
LCD to exit to normal operation.
note:
All other SSB and DATA settings remain at their de-
fault.
Connect a USB Cable from the FT-991 USB port
and your computer
Advice:
Before connecting the USB cable you must down load
the SCU-17 Drivers. The Drivers can be found on the
FT-991
FILES page at the Yaesu Web page, www.
yaesu.com. Once the Drivers have been installed con-
nect the USB cable to the computer and then to the ra-
dio. At your computers Device Manager you will nd
a Standard Driver and Enhanced Driver installed.
Computer Settings
Soundcard
At your Computer Control Panel Sound set your
Speaker Audio default to USB AUDIO CODEC.
COM PORT
Check your Com Port assignments at your Computer’s
Device Manager to be sure you have the Enhanced
and Standard Drivers. Make a note of the Com Port
numbers assigned.
RTTY/DATA JACK
DATA IN (Pin 1)
GND (Pin 2)
DAKY (Pin 3)
SHIFT (Pin 4)
RTYO (Pin 5)
BUSY (Pin 6)
DAKY
RTYO
Interface de-
vice commer-
cially available
To LINE IN/MIC IN,
LINE OUT/MIC OUT,
COM port, etc.
Commercially available
USB cable
To USB port
Advice:
The
FT-991
allows for PSK, Olivia, Contestia, etc. digital mode to be sent by the Data method or SSB. The conven-
tional method is to use USB, except RTTY, however the Data method allows for more accurate carrier frequency con-
trol, which is helpful in a Contest or DX environment.
120

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT-991 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info