674740
130
Zoom out
Zoom in
Vorherige Seite
1/154
Nächste Seite
Page 128 FT-991 OperaTing Manual
039 REF FREQ ADJ
Function: Adjusts the reference oscillator.
Available Values: −25 - 0 - 25
Default Setting: 0
Description: The frequency may be calibrated when
connecting a frequency counter to the transceiver, or
when receiving a standard frequency such as WWV
or WWVH.
040 CLAR MODE SELECT
Function: Selects the clarier operation.
Available Values: RX/TX/TRX
Default Setting: RX
Description: Selects the clarifier operation when the
CLAR
button is pressed.
RX:
Functions as the RX clarier which changes only
the receiver frequency without changing transmit
frequency.
TX:
Functions as the TX clarier which changes only
the transmit frequency without changing the re-
ceiver frequency.
TRX:
Functions as the TRX clarier which changes the
transmit frequency and the receiver frequency
simultaneously.
041 AM LCUT FREQ
Function: Sets the low-frequency cutoff audio filter in
AM mode.
Available Values: OFF/100Hz - 1000Hz (50Hz/step)
Default Setting: OFF
Description: This is the low-frequency cutoff audio lter
in AM mode.
The cutoff frequency can be set at 50 Hz increments
between 100 Hz and 1000 Hz.
042 AM LCUT SLOPE
Function: Sets the slope of the low-frequency cutoff au-
dio lter in AM mode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 6dB/oct
Description: Selects the slope of the low-frequency cut-
off audio lter in AM mode.
043 AM HCUT FREQ
Function: Sets the high-frequency cutoff audio lter in
AM mode.
Available Values: OFF/700Hz - 4000Hz (50Hz/step)
Default Setting: OFF
Description: This is the high-frequency cutoff audio l-
ter in AM mode.
The cutoff frequency can be set at 50 Hz increments
between 700 Hz and 4000 Hz.
044 AM HCUT SLOPE
Function: Sets the slope of the high-frequency cutoff au-
dio lter in AM mode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 6dB/oct
Description: Selects the slope of the high-frequency cut-
off audio lter in AM mode.
045 AM MIC SELECT
Function: Selects the microphone input jack for AM
mode.
Available Values: MIC/REAR
Default Setting: MIC
Description: Selects the microphone input jack to be
used in AM mode.
FRONT:
Audio is input from the
MIC
jack on the front
panel.
DATA:
Disables the microphone circuit on the front
panel and inputs audio/data from the
USB
jack
or
RTTY/DATA
jack on the rear panel.
046 AM OUT LEVEL
Function: Sets the level of the receive AM signal output
from the
RTTY/DATA
jack.
Available Values: 0 - 100
Default Setting: 50
047 AM PTT SELECT
Function: Sets the PTT control for the AM transmit sig-
nal.
Available Values: DAKY/RTS/DTR
Default Setting: DAKY
Description: Selects the PTT control method for the AM
transmit.
DAKY:
Controls the AM transmit signal from the
RTTY/
DATA
jack (pin 3) on the rear panel.
DTR:
Controls the AM transmit signal from the USB
virtual COM/DTR ports.
RTS:
Controls the AM transmit signal from the USB
virtual COM/RTS ports.
048 AM PORT SELECT
Function: Selects the input jack of the AM signal.
Available Values: DATA/USB
Default Setting: DATA
Description: Selects the input jack of the AM signal
when “
045 AM MIC SELECT
” is set to “
DATA
”.
DATA:
Inputs from the
RTTY/DATA
jack on the rear
panel.
USB:
Inputs from the
USB
jack on the rear panel.
Menu MoDe
130

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT-991 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info