674740
135
Zoom out
Zoom in
Vorherige Seite
1/154
Nächste Seite
Page 133FT-991 OperaTing Manual
092 AMS TX MODE
Function: Sets the operation of the AMS function.
Available Values: AUTO/MANUAL/DN/VW/ANALOG
Default Setting: AUTO
Description: When using the AMS (AUTO) function,
the transceiver selects one of the three transmission
modes automatically according to the received sig-
nal.
AUTO:
Selects one of the transmission modes automati-
cally according to the received signal.
MANUAL:
By briey pressing the
PTT
switch, the operating
mode may be switched between digital and ana-
log mode.
DN:
Transmits in DN mode.
VW:
Transmits in VW mode.
ANALOG:
Transmits in FM mode (analog).
093 STANDBY BEEP
Function: Sets the Standby Beep function for digital
communications.
Available Values: OFF/ON
Default Setting: ON
Description: During a digital communication, an audible
beep sounds to indicate that the contact station has
completed a transmission (Standby Beep function).
094 RTTY LCUT FREQ
Function: Sets the low-frequency cutoff audio filter in
RTTY mode.
Available Values: OFF/100Hz - 1000Hz (50Hz/step)
Default Setting: 300Hz
Description: This is the low-frequency cutoff audio lter
in RTTY mode.
The cutoff frequency can be set at 50 Hz increments
between 100 Hz and 1000 Hz.
095 RTTY LCUT SLOPE
Function: Sets the slope of the low-frequency cutoff au-
dio lter in RTTY mode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 18dB/oct
Description: Selects the slope setting of the low-fre-
quency cutoff audio lter in RTTY mode.
096 RTTY HCUT FREQ
Function: Sets the high-frequency cutoff audio lter in
RTTY mode.
Available Values: OFF/700Hz - 4000Hz (50Hz/step)
Default Setting: 3000Hz
Description: This is the high-frequency cutoff audio l-
ter in RTTY mode.
The cutoff frequency can be set at 50 Hz increments
between 700 Hz and 4000 Hz.
097 RTTY HCUT SLOPE
Function: Sets the slope of the high-frequency cutoff au-
dio lter in RTTY mode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 18dB/oct
Description: Selects the slope setting of the high-fre-
quency cutoff audio lter in RTTY mode.
098 RTTY SHIFT PORT
Function: Sets the SHIFT input jack for RTTY mode.
Available Values: SHIFT/DTR/RTS
Default Setting: SHIFT
Description: Selects the SHIFT input jack for RTTY
mode.
SHIFT:
Inputs from the
RTTY/DATA
jack (pin 4) on the
rear panel.
DTR:
Controls the signal from the USB virtual COM/
DTR ports.
RTS:
Controls the signal from the USB virtual COM/
RTS ports.
099 RTTY POLARITY-RX
Function: Sets the shift direction for receiving in RTTY
mode.
Available Values: NOR/REV
Default Setting: NOR
Description: Sets the shift direction for receiving in
RTTY mode.
NOR:
The space frequency will be lower than the mark
frequency.
REV:
The mark frequency will be lower than the space
frequency.
100 RTTY POLARITY-TX
Function: Sets the shift direction for transmitting in
RTTY mode.
Available Values: NOR/REV
Default Setting: NOR
Description: Sets the shift direction for transmitting in
RTTY mode.
NOR:
The space frequency will be lower than the mark
frequency.
REV:
The mark frequency will be lower than the space
frequency.
Menu MoDe
135

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT-991 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info