674740
136
Zoom out
Zoom in
Vorherige Seite
1/154
Nächste Seite
Page 134 FT-991 OperaTing Manual
101 RTTY OUT LEVEL
Function: Sets the output level during the sending/re-
ceiving of data in RTTY mode.
Available Values: 0 - 100
Default Setting: 50
Description: Sets the data output level during the send-
ing/receiving of data in RTTY mode. The higher the
setting, the higher the output level becomes.
102 RTTY SHIFT FREQ
Function: Sets the shift width for RTTY mode.
Available Values: 170/200/425/850 (Hz)
Default Setting: 170Hz
Description: Sets the shift width for RTTY mode.
103 RTTY MARK FREQ
Function: Sets the mark frequency for RTTY mode.
Available Values: 1275/2125 (Hz)
Default Setting: 2125Hz
Description: Sets the mark frequency for RTTY mode.
104 SSB LCUT FREQ
Function: Sets the low-frequency cutoff audio filter in
SSB mode.
Available Values: OFF/100Hz - 1000Hz (50Hz/step)
Default Setting: 100Hz
Description: This is the low-frequency cutoff audio lter
in SSB mode.
The cutoff frequency can be set at 50 Hz increments
between 100 Hz and 1000 Hz.
105 SSB LCUT SLOPE
Function: Sets the slope of the low-frequency cutoff au-
dio lter in SSB mode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 6dB/oct
Description: Selects the slope setting of the low-fre-
quency cutoff audio lter in SSB mode.
106 SSB HCUT FREQ
Function: Sets the high-frequency cutoff audio lter in
SSB mode.
Available Values: OFF/700Hz - 4000Hz (50Hz/step)
Default Setting: 3000Hz
Description: This is the high-frequency cutoff audio l-
ter in SSB mode.
The cutoff frequency can be set at 50 Hz increments
between 700 Hz and 4000 Hz.
107 SSB HCUT SLOPE
Function: Sets the slope of the high-frequency cutoff au-
dio lter in SSB mode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 6dB/oct
Description: Selects the slope setting of the high-fre-
quency cutoff audio lter in SSB mode.
108 SSB MIC SELECT
Function: Selects the microphone input jack for SSB
mode.
Available Values: MIC/REAR
Default Setting: MIC
Description: Selects the microphone input jack to be
used in SSB mode.
FRONT:
Inputs from the
MIC
jack on the front panel.
DATA:
Disables the microphone circuit on the front
panel and inputs from the
USB
jack or
RTTY/
DATA
jack on the rear panel.
109 SSB OUT LEVEL
Function: Sets the level of the SSB receiving signal out-
put from the
RTTY/DATA
jack.
Available Values: 0 - 100
Default Setting: 50
110 SSB PTT SELECT
Function: Sets the PTT transmit control for the SSB sig-
nal.
Available Values: DAKY/RTS/DTR
Default Setting: DAKY
Description: Selects the PTT transmit control method
for the SSB signal.
DAKY:
Controls the transmit signal from the
RTTY/
DATA
jack (pin 3) on the rear panel.
DTR:
Controls the transmit signal from the USB virtual
COM/DTR ports.
RTS:
Controls the transmit signal from the USB virtual
COM/RTS ports.
111 SSB PORT SELECT
Function: Sets the input jack of the SSB signal.
Available Values: DATA/USB
Default Setting: DATA
Description: Selects the input jack of the SSB signal
when “
108 SSB MIC SELECT
” is set to “
DATA
”.
DATA:
Inputs from the
RTTY/DATA
jack on the rear
panel.
USB:
Inputs from the
USB
jack on the rear panel.
Menu MoDe
136

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT-991 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info