674740
140
Zoom out
Zoom in
Vorherige Seite
1/154
Nächste Seite
Page 138 FT-991 OperaTing Manual
146 VOX DELAY
Function: Sets the VOX delay time.
Available Values: 30 - 3000 msec (10 msec/step)
Default Setting: 500 msec
Description: While operating VOX, the recovery time
(delay time) before returning to receive mode from
transmit mode may be set at 10 msec intervals. The
delay time may be adjusted while transmitting the
signal.
147 ANTI VOX GAIN
Function: Sets the VOX anti-trip.
Available Values: 0 - 100
Default Setting: 50
Description: The sensitivity of the anti-trip circuit may
be adjusted so that the VOX circuit does not acci-
dently engage due to the sounds from the transceiver
speaker. Increase the anti-trip value to the point that
sounds from the transceiver speaker do not engage
the transmitter while using VOX operation.
148 DATA VOX GAIN
Function: Sets the VOX GAIN while operating VOX
during the sending/receiving of data (PSK31, RTTY,
etc.).
Available Values: 0 - 100
Default Setting: 50
Description: Set the data input VOX gain to the point
that the data signal reliably engages the transmitter,
and also releases the transmit when there is no data
signal.
149 DATA VOX DELAY
Function: Sets the VOX DELAY time while operating
VOX during the sending/receiving of data (PSK31,
RTTY, etc.).
Available Values: 30msec - 3000msec
Default Setting: 100msec
150 ANTI DVOX GAIN
Function: Sets the data VOX ant-trip.
Available Values: 0 - 100
Default Setting: 0
Description: The sensitivity of the anti-trip circuit may
be adjusted so that the VOX circuit does not acci-
dently engage due to the received data while oper-
ating VOX. Increase the setting to a value that the
VOX circuit does not engage due to the received
data (the higher the value the greater the operation
sensitivity).
151 EMERGENCY FREQ TX
Function: Enables TX/RX operation on the Alaska
Emergency Channel, 5167.5kHz.
Available Values: ENABLE/DISABLE
Default Setting: DISABLE
Description: When this Menu Item is set to ENABLE,
the spot frequency of 5167.5 kHz will be enabled.
The Alaska Emergency Channel will be fount be-
tween the PMS memory channel
P-9U
and the
memory channel “
01
”.
Important: The use of this frequency is restricted to
stations operating in or near Alaska, and only for
emergency purposes (never for routine operations).
See §97.401(c) of the FCC regulations.
Menu MoDe
140

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT-991 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info