674750
3
Zoom out
Zoom in
Vorherige Seite
1/140
Nächste Seite
Page 1
F
T
DX
30
00 OperaTing Manual
General Description
Congratulations on the purchase of your Yaesu amateur
transceiver! If this is your rst rig, or if Yaesu equipment
is already the backbone of your station, rest assured
your transceiver will provide many hours of operating
pleasure for years to come.
The
FT
DX
3000
is an elite-class HF transceiver provid-
ing exceptional performance both on transmit and re-
ceive. The
FT
DX
3000
is designed for the most competi-
tive operating situations, whether you primarily operate
in contest, DX, or digital-mode environments.
Built on the foundation of the popular
FT
DX
9000
trans-
ceiver, and carrying on the proud tradition of the
FT-
1000
series, the
FT
DX
3000
provides up to 100 Watts
of power output on SSB, CW, and FM (25 Watts AM
carrier). Digital Signal Processing (DSP) is utilized
throughout the design, providing leading-edge transmit-
ter and receiver performance.
For exceptional protection from strong signal interfer-
ence, the optional RF µTuning Kits may be connected
via the rear panel. The RF µTuning Kits provide extraor-
dinarily sharp selectivity and protect your receiver from
close-in interference on a crowded band.
In the front end, you may select one of two RF pream-
pliers, or IPO (Intercept Point Optimization), providing
direct feed to the rst mixer. Three levels of RF attenua-
tion are available in 6-dB steps.
The
FT
DX
3000
receiver utilizes DSP ltering, incorpo-
rating many of the features of the
FT
DX
9000
, such as:
Variable Bandwidth, IF Shift, and Passband Contour
tuning. Also provided are Digital Noise Reduction, Digi-
tal Auto-Notch Filtering and a manually tuned IF Notch
lter.
On the transmit side, the Yaesu exclusive Three-Band
Parametric Microphone Equalizer allows precise and
flexible adjustment of the waveform created by your
voice and microphone. The audio Amplitude, Center
Frequency, and Bandwidth are adjusted separately for
the low, mid-range, and high-frequency audio spectrum.
The transmitted bandwidth may also be adjusted.
Advanced features include: Direct Keyboard Frequency
Entry and Band Change, Speech Processor, IF Monitor
for Voice modes, CW Pitch control, CW Spot switch,
Full CW QSK, CW Message Memory, adjustable IF
Noise Blanker, and all mode Squelch. Three TX/RX
antenna ports are provided on the rear panel. Two key
jacks are provided (one on the front and one on the rear
panel). The key jacks may be congured independently
for paddle input, connection to a straight key, or com-
puter-driven keying interface.
Frequency setup is straightforward on the
FT
DX
3000
.
Enter frequency directly for both VFO-A and VFO-B.
Separate keys are available for band selection. Each
band key provides three separate VFO settings for three
different parts of each band. You may create three inde-
pendent VFO settings of frequency, mode, and lter for
each band.
In addition, 99 memories are provided to store: Frequen-
cy, Mode, IF lter selection, Clarier offset, and Scan-
skip status. What’s more, five quick-recall (“QMB”)
memories can instantly store operational settings at the
push of a button.
The built-in antenna tuner includes 100 memories that
automatically store antenna matching settings for rapid,
later automatic recall.
Interfacing for digital modes is extremely simple with
the
FT
DX
3000
, thanks to the dedicated RTTY/PSK con-
nection jack on the rear panel. Optimization of the lter
passband, DSP settings, carrier insertion point, and dis-
play offset for digital modes, is possible via the Menu
programming system.
Advanced technology is only part of the
FT
DX
3000
story. Yaesu stands behind our products with a world-
wide network of dealers and service centers. We greatly
appreciate your investment in the
FT
DX
3000
, and we
look forward to helping you get the most enjoyment
from your new transceiver. Please feel free to contact
your nearest dealer, or one of Yaesu’s national headquar-
ters ofces, for technical advice, interfacing assistance,
or accessory recommendation. Watch Yaesu U.S.A.’s
Home Page for late-breaking information about Stan-
dard Horizon and Yaesu products: http://www.yaesu.
com.
Please read this manual thoroughly, to gain maximum
understanding of the full capability of the
FT
DX
3000
.
We thank you again for your purchase!
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FTDX-3000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info