Bedienungsanleitung Yaesu FTDX1200 (Seite 29 von 140) (Englisch)

674747

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Page 27FT

1200 OPERATING MANUAL

DISPLAY INDICATIONS

Clock

Indicates the current time.

To set the clock

1. 3ress and hold the

[

C.S

]

button until the clock

digits blink.

. (nter the present time via the number keys



[

BAND

]

keys).

3. 3ress the

[

ENT

]

button.

Multi-Function Display

This area usually displays the status of major func-

tions.

3ress the

[



]

buttons to select an indicator

for the desired function, then press the

[

SELECT

]

button to select either of the settings.

DVICE:



This area also shows the CW5TTY'$T$ texts,

SC23( level meters, memory channels, and

menu items.

VOX:

This is the 21 or 2FF indicator for the automatic

voice-actuated transmitter switching in the SSB,

$0, and F0 modes. The controls affecting V2;

operation are the 0enu items “

181 VOX GAIN

”,

“

182 VOX DELAY

”, and “

183 ANTI VOX GAIN

”.

By proper adjustment of these controls, hands-free

voice-actuated operation is possible.

METER:

This indicator determines the function of the meter

during transmission.

 Indicates the 5F 3ower 2utput, from 0

to 10 Watts on transmit.

ALC

 Indicates the relative $LC voltage.

SWR

 Indicates the Standing Wave 5atio

Forward 5eÀected).

COMP

 Indicates the speech compressor level

SSB mode only).

 Indicates the ¿nal ampli¿er drain cur-

rent.

VDD

 Indicates the ¿nal ampli¿er drain volt-

age.

PROC

(

Processor):

This indicator enables the Speech 3rocessor for

SSB transmission. $djustment of the 3rocessor

level is accomplished via the

[

PROC/CAR

]

knob.

DVICE:



The Speech 3rocessor is a tool for increasing

the average power output through a compres-

sion techniTue. However, if the 3rocessor level

is advanced too far, the increase in compression

becomes counter-productive, as intelligibility

will suffer. We recommend that you monitor

the sound of your signal using the 0onitor with

headphones).

DNR:

This indicator turns the 0ain band VF2-$) re-

ceiver’s 'igital 1oise 5eduction circuit on and off.

$djustment of the 1oise 5eduction level is accom-

plished via the 0enu item “

110 DNR LEVEL

”.

MIC EQ:

This indicator enables the Three-Band-3arametric

0icrophone (Tuali]er. The (Tuali]er settings are

activated via the 0enu.

DNF:

This indicator turns the 0ain band VF2-$) re-

ceiver’s 'igital 1otch Filter on and off. This is an

automatic circuit, and there is no adjustment knob

for the '1F.

KEYER:

This indicator toggles the internal CW keyer on

and off. The .eyer sending speed is adjusted via

the front panel’s

[

MIC/SPEED

]

knob and the CW

Hang Time is adjusted via the 0enu item “

064

CW BK-IN DELAY

”.

ZIN/SPOT:

This indicator enables the CW receiver spotting

tone. By matching the S32T tone to that of the in-

coming CW signal precisely the same pitch), you

will be “]ero beating” your transmitted signal with

the freTuency of the other station.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yaesu FTDX1200 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info