Bedienungsanleitung Yaesu FTDX1200 (Seite 77 von 140) (Englisch)

674747

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Page 75

1200 OPERATING MANUAL

SPLIT OPERATION USING THE TX CLARIFIER

For split T;5; operation in “casual” pile-ups, where the split is less than 10 kH], the T; Clari¿er 2ffset Tuning) fea-

ture may be utili]ed.

1. 3ress the

[

TX CLAR

]

button. The “

” icon will

appear in the TFT display.

QUICK POINT:

The Clarifier is freTuently used for receiver offset

tuning. However, for '; pile-ups where the ';

station is using a split of less than 10 kH], the T;

Clari¿er function is usually the Tuickest way to set

the transmitter to the desired offset freTuency.

. 5otate the

[

VFO-B/CLAR

]

knob to set the desired

transmitter offset. $ maximum split of . kH]

may be set.

3. To exit from T; Clari¿er operation, press the

[

CLAR

]

button once more. The “

” icon will disap-

pear from the display.

DVICE:



When listening to a “pile-up” calling a '; station,

in order to ¿nd the station currently being worked,

you may press the

[

RX CLAR

]

button. Then, use

the

[

VFO-B/CLAR

]

knob to ]ero in on the station

calling the '; use the S32T function on CW for

precise alignment of your freTuency). You may then

press the

[

RX CLAR

]

button again to cancel the 5;

Clari¿er, and return to reception on the '; station’s

freTuency.



-ust as with receiver Clari¿er operation, the amount

of offset from the original VF2 freTuency will ap-

pear in the display.



$s with receiver Clari¿er operation, when you turn

the T; Clari¿er off, the last-used offset is remem-

bered, and will be available if you turn the T; Clari-

¿er back on. To clear the Clari¿er offset, press the

[

CLEAR

]

button.

UICK POINT:

TRANSMITTER CONVENIENCE FEATURES

When attempting to work a '; station on CW in a split

freTuency pile-up, remember that a large number of

other stations may also be using Yaesu transceivers with

capability similar to that of your

1200

. 2n the ';

side of the pile-up, everyone calling precisely on the

same CW freTuency will sound like a single tone! So

you may have more success if you use the 5; Clari¿er

to ¿nd a hole in the pile-up, instead of trying to ]ero-

beat the last station worked by the '; station.

&ODUL¿HU2IIVHW,QGLFDWRU

$ visual depiction of the relative offset of the Clari¿er may be displayed, using the Tuning 2ffset Indicator.

[

VFO-B/CLAR

]

Knob

[

RX CLAR

]

Button

[

TX CLAR

]

Button

[

CLEAR

]

Button

1. 3ress the

[

]

button to engage the 0enu

mode.

. 5otate the

[

VFO-B/CLAR

]

knob or press the



button) to select 0enu item “

011 BAR

DISPLAY SELECT

”.

3. 3ress the [

SELECT

] button, then rotate the

[

VFO-B/CLAR

]

knob or press the



button)

to select “

CLAR

” from the available choices the

factory default is “

CW TUNE

”.

4. 3ress the

[

SELECT

]

button, then press the

[

]

button to save the new setting and exit

to normal operation.

Plus (+) Offset

Minus (-) Offset

TX Frequency = RX Frequency

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yaesu FTDX1200 Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info