674747
91
Zoom out
Zoom in
Vorherige Seite
1/140
Nächste Seite
Page 89
FT
DX
1200 OPERATING MANUAL
CW CONVENIENCE FEATURES
1. 3ress the
[
MODE
]
button to set the operating mode
to CW.
. Tune the receiver to a CW signal, then press and
hold the
[
SCOPE
]
switch for one second or longer.
A
DVICE:
The CW '(C2'( screen is displayed, and the de-
coded message is displayed on the screen.
N
OTE:
Interfering signals, noise, phasing, code accuracy,
and the like may prevent accurate message copy.
To cancel the CW decode function, press and hold
the
[
SCOPE
]
switch again for one second or longer.
A
DVICE:
If scrambled text is displayed due to noise and
clutter, when a CW signal is not being received,
turn the
[
VFO-B/CLAR
]
knob to adjust the
threshold level.
'ecoding accuracy will increase if you turn the
[
MIC/SPEED
]
knob and adjust to a speed close
to that of the CW signal being received.
CW DECODE
When the optional FFT unit is installed, alphanumeric 0orse code can be decoded and displayed as text on the TFT dis-
play.
[
MODE
]
Button
[
SCOPE
]
Button
Threshold Level Adjustment
Scrambled text may be displayed due to noise and clutter, when a signal is not being received. You can adjust the
threshold level to reduce or eliminate the scrambled text.
Turn the
[
VFO-B/CLAR
]
knob, and adjust the
threshold level between 0 and 100) so text is not
displayed due to noise and the like.
1ote that text will no longer be displayed for
weak signals if you increase the level too much.
You switch between threshold level display and
normal display each time you press the
[
SE-
LECT
]
button.
The threshold level is displayed in the TFT dis-
play.
Displays the decoded
Morse code.
Displays content written to
the Contest Memory Keyer
ɦ
ɦ
If you transmit content written to the Contest Memory
Keyer (page 84), the transmit CW signal is displayed as
text.
Note that transmitted text is displayed in white.
%9
&'%1&' #(((6
%3 %3 %3 &'
-_
9
:
&%
%3 %3 %3 & ,#'Ჹ
AF-FFT display (see page 40)
(“Spectrum” or “Waterfall” display)
Threshold level
91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FTDX1200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info