Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
VHF/UHF DUAL BAND FM TRANSCEIVER
FTM-10R
OPERATING MANUAL
VERTEX STANDARD CO., LTD.
4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525, 1118 ZN Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
VERTEX STANDARD
(
AUSTRALIA
)
PTY., LTD.
Normanby Business Park, Unit 14/45 Normanby Road
Notting Hill 3168, Victoria, Australia
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    VHF/UHF DUAL BAND FM TRANSCEIVER

    FTM-10R
    OPERATING MANUAL

    VERTEX STANDARD CO., LTD.

    4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan

    VERTEX STANDARD

    US Headquarters
    10900 Walker Street, Cypress, CA 90630, U.S.A.

    YAESU EUROPE B.V.

    P.O. Box 75525, 1118 ZN Schiphol, The Netherlands

    YAESU UK LTD.

    Unit 12, Sun Valley Business Park, Winnall Close
    Winchester, Hampshire, SO23 0LB, U.K.

    VERTEX STANDARD HK LTD.

    Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,
    Kwun Tong, Kowloon, Hong Kong

    VERTEX STANDARD (AUSTRALIA) PTY., LTD.
    Normanby Business Park, Unit 14/45 Normanby Road
    Notting Hill 3168, Victoria, Australia



  • Page 2

    Contents
    Features ............................................................. 1
    Front Panel & Top Panel ................................. 4
    Rear Panel & LCD ........................................... 6
    Accessories & Options ...................................... 8
    Supplied Accessories ..................................... 8
    Optional Accessories ...................................... 9
    Installation ...................................................... 10
    Preliminary Inspection ................................. 10
    Installation Tips ............................................ 10
    Safety Information ........................................ 11
    Mobile Installation ....................................... 12
    Base Station Installation ............................... 14
    Antenna Considerations ............................... 15
    Separate Installation ..................................... 16
    Non-Separate Installation ............................. 21
    Basic Operation .............................................. 22
    Receive ......................................................... 22
    Transmission ................................................ 23
    Smart Menu Features ..................................... 24
    AF Dual Function ......................................... 25
    ARTSTM ........................................................ 26
    Dimmer function .......................................... 27
    Horn Alert feature ........................................ 27
    Intercom Function ........................................ 28
    Monitor feature ............................................. 28
    Public Address feature ................................. 29
    Reverse feature ............................................. 29
    Scan feature .................................................. 30
    Smart SearchTM Operation ............................ 30
    Squelch Level Adjust ................................... 31
    TCALL ......................................................... 32
    TX Power Select .......................................... 32
    Intercom Volume Control ............................ 32
    Memory Operation ......................................... 33
    Memory Storage ........................................... 33
    Memory Recall ............................................. 34
    Memory Channel Customization .................. 35
    Memory Group Bank ............................... 36
    Memory Channel Number Change .......... 37
    Memory Channel Sort .............................. 37
    Labeling Memory ..................................... 38
    Scan Type ................................................. 39
    Skip/Preferential Scan Setting ................. 39
    Squelch Level ........................................... 40
    CTCSS frequency .................................... 40
    DCS code ................................................. 41
    CTCSS/DCS Operation ........................... 41
    Storing Independent Transmit
    Frequency (Odd Split) ....... 42
    Transmitter Power Level .......................... 43
    Deleting Memory ..................................... 43
    Club Channel Operation ................................ 44
    Recalling the Club Channel ......................... 44
    Activating the Club Channel Monitor .......... 44
    Message Feature ............................................. 46
    Programming a Message .............................. 46
    Programming a Member List ........................ 47
    Cloning the Message .................................... 48
    Set your Personal ID .................................... 49
    Sending Messages ........................................ 49
    Cloning ......................................................... 50
    Changing the Club Channel frequency ........ 52
    Clock/Timer Operation .................................. 53
    Set up the Clock ........................................... 53
    Displays the Current Time ........................... 54

    Using the Stop Watch Timer ........................ 55
    Using the Interval Timer .............................. 55
    Convenience Features .................................... 56
    MUTE feature .............................................. 56
    LOCK ........................................................... 56
    Automatic Audio Volume Controller ........... 56
    AF-VFO feature ........................................... 57
    VOX Operation ............................................ 57
    VOX Sensitivity ........................................... 58
    Listening to AM/FM Broadcast Station ....... 58
    Time-Out Timer (TOT) ................................ 58
    Listening to external audio input .................. 59
    Bluetooth® Operation ................................... 60
    AF Dual Function ........................................... 62
    CTCSS Operation ........................................... 64
    DCS Operation ............................................... 65
    EPCS (Enhanced Paging &
    Code Squelch) Operation ............ 66
    Internet Connection Feature (WiRESTM) ..... 68
    DTMF Autodialer ........................................... 71
    Repeater Operation ........................................ 73
    Band Expansion .............................................. 74
    Weather Broadcast Channel Operation ....... 75
    Miscellaneous Setting ..................................... 76
    Channel Step Selection ................................ 76
    Changing the Operating Mode ..................... 76
    PTT key function .......................................... 77
    Key Beeper ................................................... 77
    Smart Key Select .......................................... 77
    Repeater Shift Direction ............................... 78
    Repeater Shift Offset .................................... 78
    Automatic Repeater Shift ............................. 78
    Programming the Key Assignments ............. 79
    Scanning Band ............................................. 80
    Scan-Resume Mode ...................................... 80
    Scan Direction .............................................. 81
    Scan Start Direction ..................................... 81
    Split Tone Operation .................................... 82
    CTCSS/DCS/EPCS Bell Operation ............. 82
    Battery Voltage Display ............................... 83
    Temperature Display .................................... 83
    Clock Format ................................................ 83
    Time System ................................................. 84
    Alarm Set ...................................................... 84
    Interval Beep ................................................ 84
    Automatic Power-Off (APO) ....................... 85
    Audio Pitch Control ..................................... 85
    Volume Setting Alert feature ....................... 86
    Speaker Selection ......................................... 86
    Stereo/Monaural Selection ........................... 87
    MIC Gain Setting ......................................... 87
    PTT Lock ..................................................... 87
    Menu (“Set”) Mode ........................................ 88
    Appendix ....................................................... 101
    MH-68B6J Microphone ............................... 101
    MH-68A6J Microphone ............................... 101
    Installation of Optional Accessories ............ 102
    Microphone Jack “MEK-M10” .................. 102
    BU-1 Bluetooth® Adapter Unit ................ 104
    CAB-1 Bluetooth® Head Set
    Charger Sleeve ...... 106
    Reset Procedure ............................................ 107
    Troubleshooting ............................................ 108
    Specifications ................................................ 109



  • Page 3

    FEATURES

    New Concept in Ultra compact Mobile transceivers
    The ultra small size and design of this radio gives you many choices for mounting and
    using this radio in your vehicle. The front panel may be separated from the main unit providing many placement and mounting options even for motor cycles or off road vehicles.
    The microphone and the PTT switch are installed on the front panel so you can transmit
    without connecting any microphone. You will not need an additional microphone or cable
    to interfere with your driving on the road.
    Simple set-up and no microphone or curl cord needed
    The one touch, quick release front panel holder (new type) and the mounting bracket allow
    you to place the front panel anywhere you want. The newly designed mobile mounting
    bracket allows you to install or release the radio very easily.
    The front panel has a magnet and it is possible to install it without using screws.
    An angled panel adapter is included. The front panel may be adjusted up to 30 degrees
    inclination to allow an improved, comfortable operating position.
    Convenient Operation
    The large function dial and key buttons afford simple operation, even while wearing driving gloves. The shape, size and position of the keys have been studied carefully. The design
    will help avoid miss-operation of the keys while operating the vehicle.
    Water proof front panel
    The front panel is engineered to IP57 waterproof standards. You can mount the panel on the
    handle bar of a motorcycle.
    Superb visibility with new LCD panel
    The bright LED and the Ocean Blue color LCD assure comfortable viewing night or day.

    FTM-10R OPERATING MANUAL

    1



  • Page 4

    FEATURES
    Great new options to optimize your Motor Sports activities
    -- Hands free operation with optional Bluetooth® headset-When the optional Bluetooth® stereo headset is used with the optional Bluetooth® unit
    and charger sleeve, you can enjoy comfortable hands free operation while you are driving.
    Using the high audio output external speaker, the magnetic mounting brackets and the
    Bluetooth® unit can provide hands-free operation and unlimited possibilities when using
    this radio in any Motor Sports activity.
    Reliable and advanced performance
    The final transmitter amplifier produces up to 50 watts VHF and 40 watts UHF of reliable
    and stable high power RF output.
    The radio has wide receiving frequency capability, and an independent AM/FM broadcast
    receiver. The Amateur radio receiver is specially designed for optimal Amateur band operation, with improved adjacent channel selectivity and IMD performance. You will appreciate the superior performance of the receiver when operating in strong electro magnetic
    signal environments. The rugged chassis construction provides great reliability in any environment you may encounter on the car or the bike.
    Loud Audio operation
    A 2 inch speaker is mounted inside of the radio to provide powerful, low distortion AF
    output. The high volume will give excellent audio recognition, even in very noisy environments.
    Also available is a MLS-200-M10 optional external speaker. You can have loud audio
    output with the 8 Watt AF amplifier built into the radio.
    Sturdy rear chassis
    A large aluminum die cast chassis forms a very sturdy rear case, and effectively radiates the
    heat from the RF amplifier without the need of a cooling fan. The sandwich construction of
    the chassis shields the electrical circuits from alternator and ignition noise. You have worry
    free operation during long hours of rough handling in harsh environments.
    Advanced features to support many Motor Sport activities.
    U 500 memory channels with alpha-numeric labels.
    U High output audio amplifier and optional external loudspeaker.
    U The PA (Public Address) function permits communicating with a loud voice.
    U The Intercom function provides communication through headphones between passengers in the vehicle. Also the Bluetooth® unit can be used for the intercom.
    U An AM /FM broadcast receiver is included. Audio line input is provided for connection
    to your iPod® (FM broadcast and external input have stereo audio available)
    U AF preset function alerts you when the AF audio level is changed by accident. You
    enjoy the appropriate and optimized setting of volume level.

    2

    FTM-10R OPERATING MANUAL



  • Page 5

    FEATURES
    U The message send/receive function permits sending a programmable 16 character message with the transmitter’s ID. You can send your words by “Message” function even
    when the noise level at the opposite station is too high for audio communication.
    U The wireless clone feature permits the settings and data of the radio to be duplicated in
    other radios without connecting any wires. All the radios in your group traveling together can have the same settings with the easy cloning operation.
    U A convenient stopwatch function and display includes a Lap counter, Interval Timer/
    Alert and Time.
    U VOX is installed for hands free operation.
    U Many new features include: Tone Control, One-touch band selection, Automatic audio
    level control, Dimmer, TOT, WiRES, DC supply voltage indication, and APO.

    FTM-10R OPERATING MANUAL

    3



  • Page 6

    FRONT PANEL & TOP PANEL
    /

    keys

    These keys select the following operations.
    • AF Dual Feature (See page 25)
    • Reverse (See page 29)
    • ARTS Feature (See page 26)
    • Scan Operation (See page 30)
    • Display Dimmer (See page 27)
    • Smart Search Operation (See page 30)
    • Horn Alert Feature (See page 27)
    • Squelch Threshold Level (See page 31)
    • Intercom Operation (See page 28)
    • TCALL (See page 32)
    • Monitor Feature (See page 28)
    • TX Power Level (See page 32)
    • Public Address (See page 29)
    • Volume Level Control while Intercom Operation (See page 32)

    PTT keys
    Press this key to transmit.
    Speak into the microphone while pressing this key.
    P Release this key to return to receive.
    P You may change this key function to “toggle”
    mode (toggle the “transmit” and “receive” mode
    each time the key is pressed). (See page 77)

    MIC
    TX/BUSY Indicator
    This indicator glows green when a signal is
    received.
    This indicator glows red during transmission.
    This indicator blinks blue when a message is
    received.
    This indicator glows white when transmitting
    a message.

    The internal microphone is located
    here. Speak into the grill in a normal
    voice level while pressing the PTT key.

    VOL/SEL key
    You may adjust the receiver audio level with the DIAL knob after pressing this key.
    P The LED to the left of the DIAL knob will glow red when the DIAL knob is set to control
    the receiver audio level.
    P Press this key again or wait for three seconds, to cancel control of the audio level by the
    Dial knob.
    Mute Function:
    Press and hold this key for one second to temporarily mute the receiver audio.
    Press this key again to restore the receiver audio.

    4

    FTM-10R OPERATING MANUAL



  • Page 7

    FRONT PANEL & TOP PANEL
    key

    POWER key

    Press this key to activate the
    function that is selected by the
    /
    keys.

    Press and hold this key for two seconds to toggle the
    transceiver’s power on or off.
    Lock Function:
    Press this key momentarily while the transceiver is
    turned on to toggle the key lockout feature on or off.
    P You may also lock out the PTT key when the
    LOCK mode is activated, by changing Menu Item
    “F22 PTT LOCK”. See page 87.

    key
    P This key switches frequency control between the
    VFO and Memory System.
    P In the VFO mode, press and hold this key for one
    second to enter the Memory Write mode and then
    press this key again to store the frequency into
    the memory.
    P In the Memory mode, press and hold this key for
    one second to enter the Memory Channel
    Customization mode.

    DIAL knob
    P Selects the operating frequency and also selects
    the memory channel.
    P Adjusts the receiver audio level when the LED to
    the left of the DIAL knob glows red.
    P Select the Smart Menu Item and parameter when
    the Smart Menu is activated.

    LED

    keys

    P This LED glows red when adjusting the receiver audio level
    with the DIAL knob.
    P This LED blinks orange when the Volume Setting Alert feature is active.
    P This LED blinks yellow when the Timer feature is active.

    P Press these keys to switch the operating band as follows:
    2 m Amateur Band
    430 MHz Amateur Band
    FM BC Band
    AM BC Band
    WX Band
    Audio Line
    Group Channel
    2 m Amateur Band

    P Press and hold this key for one second (MHz digits will blink), then rotate the DIAL
    knob to change the frequency in 1 MHz steps.

    FTM-10R OPERATING MANUAL

    5



  • Page 8

    REAR PANEL & LCD
    Stereo Audio

    Repeater Shift Direction

    CTCSS Operation
    Volume level
    DTMF Feature Active

    S- & PO Meter

    Internet Connection
    Feature Active

    Operating band
    Club Channel Monitor
    Feature Active
    Operating Frequency

    Memory Mode Selected
    Digital Code Squelch (DCS) Operation

    DC 13.8 V Cable Pigtail w/Fuse
    Connect this pigtail to the car battery directly with the supplied DC cable.
    P Connect the red lead to the positive side (+) of the battery and connect the
    black lead to the negative side (-) of the battery. The DC cable is as short as
    possible, because transmitting requires a high DC electrical current flow.
    P Performance may be significantly reduced when connecting the DC cable
    to the cigarette lighter plug or fuse box.
    P Install a line filter if your vehicle has objectionable alternator noises.

    ANT jack
    Connect an efficient 144/430 MHz antenna, which is adjusted to 50-Ohm impedance. Use low-loss 50-Ohm coaxial
    cable with type-M (PL259) connector.

    You may connect an optional
    CAB-1 Bluetooth® Head Set
    Charger Sleeve here.

    6

    You may connect an optional
    MEK-M10 Microphone Jack
    here.

    FTM-10R OPERATING MANUAL



  • Page 9

    REAR PANEL
    MIC jack
    You may connect an optional MH-68A6J or MH68B6J Hand Microphone to this jack if you use.

    EXT SPK jack
    This 3-contact 3.5-mm mini stereo-phone jack provides receiver audio output for an optional external speaker. The audio impedance is 4 Ohms, and
    the level varies according to the setting of the front
    panel VOL control.
    P Inserting a plug into this jack disables audio from
    the transceiver’s internal speaker.
    P When stereo speakers are connected to this jack,
    and the Menu item “F42 STEREO” is set to “STEREO”, you may enjoy FM Broadcast audio, or
    the external audio from the LINE IN jack in stereo.
    P If there is no audio output from the external
    speakers when connected to this jack, confirm
    that the Menu item “F34 SPEAKER” is set to
    “REAR” (See page 86).
    P Use of a sound isolating headset while driving
    on public roads is not lawful. An open type headset must be used for safety.
    Hint: Menu Mode
    The FTM-10R Menu enables the configuration of
    49 transceiver parameters to your favorite settings.

    LINE IN jack
    Connect an external audio source (such as the iPod® ) to this
    jack using the after-market audio cable.
    When using the audio line input to this jack, you may enable
    the receiving of amateur signals while listening to your favorite music.
    Adjust the input level with the volume control of the external
    audio equipment connected.
    The connection cable depends on the external audio equipment
    you connect. Please ask your dealer.

    FTM-10R OPERATING MANUAL

    7



  • Page 10

    ACCESSORIES & OPTIONS
    SUPPLIED ACCESSORIES
    U9900222 (2 pcs)

    CP8850001

    Mobile Mounting Bracket

    DC Power Cord W/Fuse

    Spare Fuse (15 A)

    (T9021715)

    (Q0000151) (2 pcs)

    U30520020

    RA0946700
    S5000296

    Angle Adapter

    Separation Cable (3 m)

    (RA0886300)

    (T9207411)

    Magnet

    U51510020

    U40412220
    (2 pcs)
    RA0458800

    Front Panel Bracket

    RA0930900

    Front Panel Hanger

    Speaker Cable
    (T9101574)

    Hex Wrench (4 mm) (S5000218)
    Hex Wrench (3 mm) (S5000297)
    Operating Manual
    Warranty Card

    8

    FTM-10R OPERATING MANUAL



  • Page 11

    ACCESSORIES & OPTIONS
    OPTIONAL ACCESSORIES

    MH-68A6J
    MH-68B6J
    MEK-M10
    DTMF Microphone Normal Microphone Microphone Jack

    MLS-200-M10
    High-Power External
    Speaker

    MMB-M10
    Multi-Angle Bracket

    MMB-M11
    Handle Bar Bracket

    CT-M10
    Separation Cable (6 m)

    BH-1
    Bluetooth® Headset

    BU-1
    Bluetooth® Adapter Unit

    CAB-1
    Bluetooth® Headset
    Charger Sleeve

    FEP-4
    Ear Phone for BH-1

    CT-M11
    Connection Cable

    Availability of accessories may vary in some regions. This product is designed to perform
    optimally when used with genuine Vertex Standard accessories. Vertex Standard shall not
    be liable for any damage or accidents such as fire, leakage or explosion of batteries, etc.,
    caused by the malfunction of non-Vertex Standard accessories. Consult your Vertex Standard dealer for details on these and any future available options. Connection of any nonVertex Standard-approved accessory, should it cause damage, may void the Limited Warranty on this apparatus.

    FTM-10R OPERATING MANUAL

    9



  • Page 12

    INSTALLATION
    This chapter describes the installation procedure for integrating the FTM-10R into a typical amateur radio station. It is presumed that you possess technical knowledge and conceptual understanding consistent with your status as a licensed radio amateur. Please take some
    extra time to make certain that the important safety and technical requirements detailed in
    this chapter are followed closely.

    PRELIMINARY INSPECTION
    Inspect the transceiver visually immediately upon opening the packing carton. Confirm
    that all controls and switches work freely, and inspect the cabinet for any damage. Gently
    shake the transceiver to verify that no internal components have been shaken loose due to
    rough handling during shipping.
    If any evidence of damage is discovered, document it thoroughly and contact the shipping
    company (or your local dealer, if the unit was purchased over-the-counter) so as to get
    instructions regarding the prompt resolution of the damage situation. Be certain to save the
    shipping carton, especially if there are any punctures or other evidence of damage incurred
    during shipping. If it is necessary to return the unit for service or replacement, use the
    original packing materials. Then put the entire package inside another packing carton to
    preserve the evidence of shipping damage for insurance purposes.

    INSTALLATION TIPS
    To ensure long life of the components, be certain to provide adequate ventilation around the
    cabinet of the FTM-10R.
    Do not install the transceiver on top of another heat-generating device (such as a power
    supply or amplifier). Avoid heating vents and window locations that could expose the transceiver to excessive direct sunlight, especially in hot climates. The FTM-10R should not be
    used in an environment where the ambient temperature exceeds +140 °F (+60 °C).

    10

    FTM-10R OPERATING MANUAL



  • Page 13

    INSTALLATION
    SAFETY INFORMATION
    The FTM-10R is an electrical apparatus, as well as a generator of High RF (Radio Frequency) energy. You should exercise all safety precautions that are appropriate for this type
    of device. These safety tips apply to any device installed in a well-designed amateur radio
    station.
    Never allow unsupervised children to play in the vicinity of your transceiver or
    antenna installation.
    Be certain to wrap any wire or cable splices thoroughly with insulating electrical
    tape, to prevent short circuits.
    Do not route cables or wires through doorjambs or other locations where they may
    become frayed and shorted to ground or to each other.
    Do not stand in front of a directional antenna while you are transmitting into that
    antenna. Do not install a directional antenna in any location where humans or pets
    may walk in the main directional lobe of the antenna's radiation pattern.
    In mobile installations, it is preferable to mount the antenna on top of the vehicle, if
    feasible, this will utilize the car body as a counterpoise and raise the radiation pattern as far away from passengers as possible.
    During mobile operation when stopped (in a parking lot, for example), make it a
    practice to switch to Low power if there are people walking nearby.
    Never wear dual-earmuff headphones while driving a vehicle.
    Do not attempt to drive your vehicle while making a telephone or auto patch call
    while using the optional DTMF microphone. Pull over to the side of the road, whether
    dialing manually or using the auto-dial feature.
    Warning!: High RF voltage is present in the TX RF section of the transceiver while transmitting. Do not touch the TX RF section while transmitting.

    FTM-10R OPERATING MANUAL

    11



  • Page 14

    INSTALLATION
    MOBILE INSTALLATION
    The FTM-10R must only be installed in vehicles having a 13.8 Volt negative ground electrical system. Mount the transceiver where the display, controls, and microphone are easily
    accessible, using the supplied Mobile Mounting Bracket.
    The transceiver may be installed in almost any location, but should not be positioned near
    a heating vent or anywhere where it might interfere with driving (either visually or mechanically). Make sure to provide plenty of space on all sides of the transceiver so that air
    can flow freely around the radio’s case.
    An antenna and an antenna cable are not included in the box. Purchase them separately to
    accommodate your transceiver installation.
    U The DC power cable draws a large current when transmitting. The power cable should
    be wired as short as possible, and connected directly to the battery. (Do not use the
    cigarette lighter socket for power connections).
    U Never remove the fuse holders from the DC cables
    U Never connect the transceiver directly to a 24 V battery.
    U Select a low-loss coaxial cable to connect the transceiver with the antenna. Use the
    shortest length possible.
    U Select a quality, high efficiency VHF/UHF antenna, and mount it in a good location on
    the car to obtain the maximum performance from the transceiver. (NOTE: An antenna
    designed with a matching device that forms a low DC resistance to ground may have
    poor reception on the AM broadcast band.)
    U The antenna depends on good grounding to realize maximum performance. Contact
    your dealer for information on transceiver and antenna installation.
    U If alternator noise exists, use a line filter in the DC power cable connection.
    IMPORTANT: Select a location which can support the weight of the FTM-10R transceiver and does not interfere with your driving.

    12

    FTM-10R OPERATING MANUAL



  • Page 15

    INSTALLATION
    Mobile Power Connections
    To minimize voltage drop and avoid blowing the vehicle's fuses, connect the supplied DC
    power cable directly to the battery terminals. Do not attempt to defeat or bypass the DC
    cable fuse - it is there to protect you, your transceiver, and your vehicle's electrical system.
    Warning!
    Never apply AC power to the power cable of the FTM-10R, nor DC voltage greater
    than 15.8 Volts. When replacing the fuse, use only a 15-A fuse. Failure to observe
    these safety precautions will void the Limited Warranty on this product.
    U Before connecting the transceiver, check the voltage at the battery terminals while revving the engine. If the voltage exceeds 15 Volts, repair the vehicle’s voltage regulator
    before proceeding with installation.
    U Connect the RED power cable lead to the POSITIVE (+) battery terminal, and the
    BLACK power cable lead to the NEGATIVE (-) terminal. If you need to extend the
    power cable, use #12 AWG or larger insulated, stranded copper wire. Solder the splice
    connections carefully, and wrap the connections thoroughly with insulating electrical
    tape.
    U Before connecting the cable to the transceiver, verify the voltage and polarity of the
    voltage at the transceiver end of the DC cable using a DC voltmeter. Now connect the
    transceiver to the DC cable.

    FTM-10R

    Cabin »

    ¼ Engine Compartment

    RED:Positive (+)
    BLACK:Negative (-)

    Battery

    Mobile Speakers
    The optional MLS-200-M10 High-Power External Speaker includes its own swivel-type
    mounting bracket, and is available from your Yaesu dealer.
    Other external speakers may be used with the FTM-10R, if they present the specified 8Ohm impedance and are capable of handling the 8 Watts of audio output supplied by the
    FTM-10R.

    FTM-10R OPERATING MANUAL

    13



  • Page 16

    INSTALLATION
    BASE STATION INSTALLATION
    The FTM-10R is ideal for base station use as well as in mobile installations. The FTM-10R
    is specifically designed to integrate into your station easily, using the following information
    as a reference.

    AC Power Supplies
    Operation of the FTM-10R from an AC line requires a power supply capable of providing
    at least 9 Amps continuously at 13.8 Volts DC. The FP-1025A and FP-1030A DC Power
    Supplies are available from your Yaesu dealer to satisfy these requirements. Other wellregulated power supplies may be used if they meet the above voltage and current specifications.
    Use the DC power cable supplied with your transceiver to make power connections to the
    power supply. Connect the RED power cable lead to the POSITIVE (+) power supply
    terminal, and connect the BLACK power cable lead to the NEGATIVE (-) power supply
    terminal.

    14

    FTM-10R OPERATING MANUAL



  • Page 17

    INSTALLATION
    ANTENNA CONSIDERATIONS
    The FTM-10R is designed for use with antennas presenting an impedance of near 50 Ohms
    at all operating frequencies. To avoid damage that could result if transmission occurs accidentally without an antenna, the antenna (or a 50 Ohm dummy load) should be connected
    whenever the transceiver is turned on.
    Ensure that your antenna is designed to handle 50 Watts of transmitter power. Some magnetic-mount mobile antennas, designed for use with hand-held transceivers, may not be
    capable of withstanding this power level. Consult the antenna manufacturer's specification
    sheet for details.
    Use high-quality 50-Ohm coaxial cable for the lead-in to your FTM-10R transceiver. All
    efforts at providing an efficient antenna system will be wasted if poor quality, “lossy” coaxial cable is used. Losses in coaxial lines increase as the frequency increases, so an 8meter-long (25’) coaxial line with under 1 dB of loss at 144 MHz may have a loss of 3 dB
    or more at 446 MHz. Choose your coaxial cable carefully based on the installation location
    (mobile vs. base) and the overall length of the cable required. (For very short runs of cable
    in a mobile installation, the smaller, more flexible cable types may be acceptable.)
    For reference, the chart below shows approximate loss figures for typically available coaxial cables frequently used in VHF/UHF installations.
    Loss in dB per 30 m (100 feet) for Selected 50-Ohm Coaxial Cables
    (Assumes 50-Ohm Input/Output Terminations)
    CABLE TYPE
    RG-58A
    RG-58 Foam
    RG-213
    RG-8 Foam
    Belden 9913
    Times Microwave LMR-400
    7/8” “Hardline”

    LOSS: 144 MHZ
    6.5
    4.7
    3.0
    2.0
    1.5
    1.5
    0.7

    LOSS: 430 MHZ
    > 10
    8
    5.9
    3.7
    2.9
    2.6
    1.3

    Loss figures are approximate; consult cable manufacturers’ catalogs for complete specifications.

    In outdoor installations, be certain to weatherproof all connectors thoroughly, as water
    entering a coaxial cable will cause losses to escalate rapidly, thus diminishing your communications effectiveness. The use of the shortest possible length of the highest quality coaxial
    cable that fits within your budget will ensure the best performance from your FTM-10R.
    Your dealer should be able to assist you with all aspects of your antenna installation requirements.

    FTM-10R OPERATING MANUAL

    15



  • Page 18

    INSTALLATION
    SEPARATE INSTALLATION
    1. Remove the four screws securing the
    Front Panel and then remove the Front
    Panel from the Transceiver Body
    (Figure 1).
    2. Disconnect the 8-pin modular plug
    from the Transceiver (Figure 2).
    3. Remove the screw affixing the Straight
    Sub Panel, and then remove the
    Straight Sub Panel from the Front Panel
    (Figure 3).
    4. Remove the four screws securing the
    Rear Case of the Front Panel and remove the Rear Case from the Front
    Panel (Figure 4). Disconnect the Connector of the Connection Cable from
    the Printed Circuit Board in the Front
    Panel when you remove the Rear Case
    (Figure 5).
    5. Remove the Binding Plate from the
    Rear Case (Figure 6-), and then pull
    out the Connection Cable from the Rear
    Case (Figure 6-).

    Figure 1

    Figure 2

    Figure 3

    Figure 4
    connector

    Figure 5

    
    Figure 6

    16

    FTM-10R OPERATING MANUAL



  • Page 19

    INSTALLATION
    SEPARATE INSTALLATION
    6. Insert the supplied 3-m Connection
    Cable from the rear side of Rear Case
    (Figure 7-), and then attach the Connection Cable to the Rear Case using
    the previously removed Binding Plate
    (Figure 7-).
    7. Attach the Connection Cable to the
    Printed Circuit Board (Figure 8), and
    then replace the Rear Case to the Front
    Panel using the previously removed
    four screws (Figure 9).
    8. Connect the 8-pin modular plug of the
    Connection Cable to the Transceiver
    (Figure 10).
    9. Mount the supplied Mobile Mounting
    Bracket to the any position using the
    supplied screws (Figure 11).

    Figure 7

    connector
    Figure 8

    Figure 9

    Figure 10

    Figure 11

    FTM-10R OPERATING MANUAL

    17



  • Page 20

    INSTALLATION
    SEPARATE INSTALLATION
    Front Panel Installation
    Use the supplied Front Panel Bracket
    1. Mount the supplied
    Front Panel Bracket to
    any suitable position using the supplied screws.

    2. Connect the supplied
    Front Panel Hanger
    using the supplied
    screw.

    3. Install the Front Panel
    into the Front Panel
    Bracket.

    Use the supplied Magnet
    1. Connect the supplied Magnet and
    Front Panel Hanger using the supplied screw.

    2. Affix the supplied Protection Seal to
    the Magnet.

    Protection Seal

    Magnet

    CAUTION!
    P If the protective film is not affixed to the magnet, it may damage the mounting
    surface.
    P Damage is possible even if the protection film is attached.
    P Be careful handling the hanger. The strong magnet could pinch your fingers.
    P Even with the strong magnet, it is possible to displace the bracket.
    P The magnet may destroy data on banking & identification cards.

    18

    FTM-10R OPERATING MANUAL



  • Page 21

    INSTALLATION
    SEPARATE INSTALLATION
    Use the Optional Multi-Angle Bracket “MMB-M10”
    1. If you use the Front Panel as a Microphone, connect the supplied Front
    Panel Hanger using the supplied
    screw.

    2. Mount the supplied Front Panel
    Bracket to the “MMB-M10” using the
    supplied two screws.

    3. If you do not use the Front Panel as a
    Microphone, install the Front Panel
    directly to the “MMB-M10”.

    Installation of the “MMB-M10”
    Hex. Nut

    M5x15
    Spring Washer
    Flat Washer
    Spring Washer

    M5x25

    Flat Washer
    Spring Washer
    M5x25

    FTM-10R OPERATING MANUAL

    19



  • Page 22

    INSTALLATION
    SEPARATE INSTALLATION
    Use the Optional Handle Bar Bracket “MMB-M11”
    1. If you use the Front Panel as a Microphone, connect the supplied Front
    Panel Hanger using the supplied
    screw.

    2. If you do not use the Front Panel as a
    Microphone, install the Front Panel
    directly to the “MMB-M11”.

    ¯
    Hex. Nut

    M5x15
    Spring Washer
    Flat Washer
    Spring Washer

    M5x25

    3. Select the Bracket and Rubber to fit
    the size of the Handle Bar (Refer to
    the table below).

    Rubber (L-a: t=1 mm)

    Rubber (S-a: t=1 mm)

    Bracket (L)

    Bracket (S)

    Rubber (S-b: t=2 mm)

    Bar
    7/8”
    1”
    1-1/4”
    1-1/2”

    20

    Rubber (L-b: t=3 mm)

    Bracket
    S
    L

    Rubber
    S-a & S-b
    S-a
    L-a & L-b
    L-a

    FTM-10R OPERATING MANUAL



  • Page 23

    INSTALLATION
    NON-SEPARATE INSTALLATION
    The FTM-10R front panel may be tilted using the supplied Angle Sub Panel.
    1. Remove the four screws securing the
    Front Panel and then remove the panel
    from the transceiver body (Figure 1).
    2. Disconnect the 8-pin modular plug
    from the transceiver (Figure 2).
    3. Remove the screw affixing the Straight
    Sub Panel, and then remove the
    Straight Sub Panel from the Front Panel
    (Figure 3).
    4. Attach the supplied Angle Sub Panel
    to the Front Panel, using the previously
    removed screw (Figure 4).
    You may set this up in a “look-up” or
    “look-down” configuration depending
    on the mounting position of the Sub
    Panel.
    5. Connect the 8-pin modular plug to the
    transceiver’s body.
    6. Attach the Front Panel (with Angle Sub
    Panel) to the transceiver’s body, using
    the previously removed four screws
    (Figure 5).

    Figure 1

    Figure 2

    Figure 3

    Figure 4

    Figure 5

    FTM-10R OPERATING MANUAL

    21



  • Page 24

    BASIC OPERATION
    RECEIVE
    1. To turn the transceiver on, press and hold in the top panel [POWER] key for two seconds.
    When you turn the transceiver on, the applied DC voltage is displayed on the LCD for
    2 seconds. Then the operating frequency will be displayed.
    To turn the transceiver off, press and hold in the [POWER] key for two seconds.
    2. Press the front panel
    /
    keys to switch the operating band as follows:
    Key
    £ 2 m Amateur Band (H-V) £ 430 MHz Amateur Band (H-U) £ FM BC Band (FM) £
    AM BC Band (AM) £ WX Band (WX) £ Audio LineÚ £ Group Memory (GRP) £ 2
    m Amateur Band (H-V) £
    Key
    2 m Amateur Band (H-V) £ Group Memory (GRP) £ Audio LineÚ £ WX Band (WX)
    £ AM BC Band (AM) £ FM BC Band (FM) £ 430 MHz Amateur Band (H-U) £ 2 m
    Amateur Band (H-V) £
    Ú When external audio equipment, like an iPod®, is connected, an after-market cable is
    required.
    When external audio equipment is connected, the input audio level must be adjusted
    on the external audio equipment.
    H-U
    H-V
    GRP
    -WX
    AM
    FM

    430 MHz Amateur Band
    144 MHz Amateur Band
    Group Memory
    Audio Line
    WX Band
    AM BC Band
    FM BC Band

    [POWER] key

    DIAL knob

    [VOL/SEL] key

    22

    /

    key

    FTM-10R OPERATING MANUAL



  • Page 25

    BASIC OPERATION
    3. Rotating the DIAL knob tunes the frequency in pre-programmed steps. Clockwise rotation of the DIAL knob will increase the frequency; counter-clockwise rotation will lower
    the operating frequency.
    /
    keys for one second (the 1 MHz digit
    4. Press and hold in one of the front panel
    will blink). Then rotate the DIAL knob to change the frequency at 1 MHz per step. This
    feature is extremely useful for making rapid frequency excursions over the wide tuning
    range of the FTM-10R.
    5. Press the [VOL/SEL] key until the red LED to the left of the DIAL knob illuminates
    and the volume level is displayed on the LCD. Now, the DIAL knob becomes the volume knob.
    6. Rotate the DIAL knob to adjust the receiver volume. Clockwise rotation increases the
    audio output level.

    TRANSMISSION
    1. Press the front panel
    /
    keys to switch the operating band to 144 MHz or 430
    MHz band.
    2. Press the PTT (Push To Talk) key on the front panel when the frequency is clear. Speak
    into the microphone on the front panel (upper left corner of the front panel) in a normal
    voice level.
    When talking around 3 feet away from the front panel microphone, the modulation may
    not be enough and the transmitted audio level may be lower.
    3. When your transmission is complete, release the PTT key. The transceiver will revert to
    the receive mode.

    PTT key

    MIC

    FTM-10R OPERATING MANUAL

    23



  • Page 26

    SMART MENU FEATURES
    The FTM-10R top panel
    following features:

    /

    keys, and the

    key select and enable operation of the

    Select the function
    Display
    AF DUAL

    ARTS
    DIMMER
    HORN 1
    HORN 2
    HORN 3
    HORN 4
    INTERCOM
    MONI
    PA
    REVERSE
    SCAN
    SQL LEVL
    SSCH
    TCALL
    TX POWER
    VOL.ITCOM

    [F] key

    Function
    Press the
    key to activate the AF Dual function which enables receiving an Amateur Band signal while listening to the signal of an FM
    Broadcast Station at the same time.
    Press the
    key to activate the ARTS feature.
    Press the
    key to enable adjustment of the display illumination level
    by the DIAL knob.
    Press the PTT switch to activate the sound of a Gong Bell.
    Press the PTT switch to activate the sound of a UFO in flight.
    Press the PTT switch to activate the sound of a klaxon.
    Press the PTT switch to activate the sound of a siren.
    Press the
    key to activate the Intercom mode.
    Press the
    key to disable noise and tone squelch.
    Press the PTT switch to route your amplified voice through the PA
    speaker.
    Press the
    key to activate the Reverse feature.
    Press the
    key to activate the scanner.
    Press the
    key to enable adjustment of the noise squelch threshold
    level by the DIAL knob.
    Press the
    key to activate the Smart Search.
    Press the
    key to activate the 1750 Hz Tone Burst.
    Press the
    key to change the transmit power level.
    Press the
    key to change the receiver audio level of the intercom
    receiver.

    Advice: When one of the above features does not appear in the list, it is because that feature
    is not assigned to the top panel
    /
    keys. Please insure the Menu
    “F14 FKEY MOD” is set to “FNC” or “FNC+MSG”.

    24

    FTM-10R OPERATING MANUAL



  • Page 27

    SMART MENU FEATURES
    AF DUAL FUNCTION
    With the “AF DUAL” function, it is possible to monitor your desired amateur band frequency while receiving AM, FM broadcast or Audio from the external input jack.
    You may select: AM broadcast, FM broadcast, Club Channel or external line input, by
    changing the Menu Item “F2 AF DUAL” (The factory default is AM broadcast receiving).
    1. Set the FTM-10R to the desired amateur band frequency by the VFO or Memory channel selection.
    2. Press the top panel
    /
    key to select “AF DUAL”.
    3. Press the
    key to activate the AF Dual function.
    P By first setting the desired VFO or memory channel in
    step #1 above, and then starting “AF DUAL” function, both the amateur signals and
    the AM broadcast station will be received.
    4. Rotate the DIAL knob to select the desired AM Broadcast station.
    P You may switch the AM Broadcast Band frequency control between the VFO and
    Memory channel by pressing the
    key.
    P When a signal is received in the amateur band, the AM Broadcast audio is muted.
    When the amateur band signal drops, the AF Dual function is resumed (monitor the
    amateur band frequency while receiving the AM broadcast).
    P You may transmit on the frequency set in step1 by pressing the PTT key, even if the
    AF Dual function is activated.
    To disable the AF Dual function, press the front panel
    /
    keys.
    P When the
    key function is set to “AF DUAL” via the
    /
    key, the
    key may be used to toggle
    top panel
    the “AF DUAL” on/off.

    FTM-10R OPERATING MANUAL

    25



  • Page 28

    SMART MENU FEATURES
    ARTSTM (Default “OFF”)
    The ARTS feature uses DCS signaling to inform both parties when you and another ARTS
    equipped station are within communications range. This may be particularly useful during
    Search and Rescue situations, where it is important to stay in contact with other members of
    your group.
    Both stations must set up their DCS codes to the same code number, then activate their
    ARTS feature using the command appropriate for their radio. Alert ringers may be activated, if desired.
    Whenever you push the PTT key, or every 25 seconds after ARTS is activated, your radio
    will transmit a signal which includes a (subaudible) DCS code
    for about 1 second. If the other radio is in range, the beeper
    will sound (if enabled) and the display will show “IN.RANGE”,
    otherwise the out of range display “OUT.RANGE” will be display during ARTS operation.
    Whether you talk or not, the polling every 25 seconds will continue until you de-activate ARTS. When ARTS is de-activated,
    DCS will also be deactivated (if you were not using it previously in non- ARTS operation).
    If you move out of range for more than one minute (four pollings), your radio will sense
    that no signal has been received. Three beeps will sound, and the display will revert to
    “OUT.RANGE”. If you move back into range, your radio will again beep, and the display
    will change back to the “IN.RANGE” indication.
    During ARTS operation, your operating frequency will continue to be displayed, but no
    changes may be made to it or other settings. You must terminate ARTS in order to resume
    normal operation. This is a safety feature designed to prevent accidental loss of contact due
    to channel change, etc.
    1. Set the FTM-10R to the desired amateur band frequency by the VFO or Memory channel selection.
    2. Set your radio and the other radio(s) to the same DCS code number per the discussion
    on page 65.
    3. Press the top panel
    /
    key to select “ARTS”.
    4. Press the
    key. You will observe the “OUT.RANGE” display on the LCD. The ARTS
    operation has now commenced.
    5. Every 25 seconds, your radio will transmit a “polling” call to the other station. When that
    station responds with its own ARTS polling signal, the display will change to “IN.RANGE”
    to confirm that the other station’s polling code was received in response to yours.
    6. When the
    key function is set to “ARTS” via the top panel
    /
    key, the
    key
    may be used to toggle the “ARTS” on/off.

    26

    FTM-10R OPERATING MANUAL



  • Page 29

    SMART MENU FEATURES
    DIMMER

    FUNCTION

    You may adjust the display dimmer level.
    /
    key to select “DIMMER”.
    1. Press the top panel
    2. Press the
    key.
    3. Rotate the DIAL knob to select a comfortable brightness
    level.
    DIMMER 1 ÅÆ DIMMER 2 ÅÆ DIMMER 3 ÅÆ
    ÅÆ DIMMER 4 ÅÆ DIMMER 5
    Bright Æ
    Å Dim
    4. Within two seconds of selecting the brightness level, save the new setting and return to
    the VFO or Memory Channel mode.
    When the
    key function is set to “DIMMER” via the top panel
    /
    key, the
    key is used as the Dimmer Level control key.

    HORN ALERT FEATURE (Default “OFF”)
    The Horn Alert feature outputs one of four unique sounds to the transceiver’s speaker.
    When an optional MLS-200-M10 External Speaker is connected, the FTM-10R transceiver may be used as an 8 watt Horn Alert.
    1. Press the top panel

    /

    key to select one of the four functions described below:

    HORN 1: Sounds a Gong Bell.
    HORN 2: Sounds a flight sound of a UFO.
    HORN 3: Sounds a klaxon.
    HORN 4: Sounds an ambulance siren.

    Graphic Bar

    2. Press the
    key to activate the Horn Alert feature.
    When the Horn Alert function is activated, the volume level
    graphic will be displayed on LCD.
    3. Press the PTT key.
    U You may change the PTT key function via Menu Item “F23 PTT MODE”.
    MOMENT: While pressing the PTT key, the audio is output from the speaker (factory default).
    TOGGLE: Once the PTT key is pressed the audio is output from the speaker, and
    when the PTT key is pressed once again, the audio output is off.
    U The unique sound, which was selected in step 1 above, will be output from the speaker.
    U The “HORN OUT” notation appears in the display while the Horn Alert is activated.
    U Press the [VOL/SEL] key to adjust the volume (AF level) of the Horn Alert output.
    While the RED LED is on, the volume level can be adjusted with the dial knob.
    U To disable the Horn Alert feature, repeat steps 1 and 2 above.

    FTM-10R OPERATING MANUAL

    27



  • Page 30

    SMART MENU FEATURES
    INTERCOM FUNCTION
    Intercom operation is possible with the FTM-10R, by installing the optional Bluetooth®
    Adapter unit “BU-1” in the radio and using the optional Bluetooth® Headset “BH-1”.
    When operating in a very noisy environment, (for example, a loud exhaust or engine noise,
    or inside an off-road vehicle) communication with a fellow passenger is possible using the
    Bluetooth® intercom feature.
    Graphic Bar

    /
    key to select “INTERCOM”.
    1. Press the top panel
    2. Press the
    key to activate the Intercom function.
    When the Intercom function is activated, the volume level
    graphic will be displayed on LCD.
    You may switch the receiver audio volume level between “High” and “Low” via the
    “VOL.ITCOM” function described below.
    When the Intercom function is activated, the internal speakers (front panel and main
    chassis) are disabled.
    To disable the Intercom function, repeat steps 1 and 2 above.
    When set the
    key function to “INTERCOM” via the
    top panel
    /
    key, the
    key to be used as the Intercom feature on/off key.

    Important Notice!
    Use of a sound-isolating headset while driving on public roads is not lawful and hazardous. An open type headset must be used for safety.

    MONITOR FEATURE
    The Monitor permits disabling the noise and tone squelch systems temporarily.
    When the received signal is weak and the sound from the speaker is intermittent, use this
    function to over-ride the squelch and hear the received signal.
    1. Press the top panel
    /
    key to select “MONI”.
    2. Press the
    key.
    The noise and tone squelch are disabled while pressing the
    key.
    When the
    key function is set to “MONI” via the top panel
    may be used as the “Monitor” key.

    28

    /

    key, the

    key

    FTM-10R OPERATING MANUAL



  • Page 31

    SMART MENU FEATURES
    PUBLIC ADDRESS

    FEATURE

    The Public Address feature enables the output of your voice to the transceiver’s speaker.
    When an optional MLS-200-M10 External Speaker is connected, the FTM-10R allows
    the transceiver to be used as an 8 W Public Address system.
    Graphic Bar

    1. Press the top panel
    /
    key to select “PA”.
    2. Press the
    key to activate the Public Address feature.
    3. Press the PTT key, and speak into the microphone in a normal voice level.
    U You may select the PTT key function via Menu Item “F23 PTT MODE”.
    MOMENT: While pressing the PTT key, the audio is output from the speaker (factory default).
    TOGGLE: Once the PTT key is pressed the audio is output from the speaker, and
    when the PTT key is pressed once again, the audio output is off.
    U Your voice is output to the speaker.
    U The “P A” notation appears in the display while the Public Address is activated.
    U Press the [VOL/SEL] key to adjust the volume (AF level) of the PA output. While
    the RED LED is on, the volume level can be adjusted with the dial knob.
    CAUTION!
    When the function is changed to the radio mode, the volume level remains the same.
    Please be careful about the volume level setting.
    U You may adjust the audio output level by rotating the DIAL knob.
    To disable the Public Address feature, repeat steps 1 and 2 above.
    Note: Please be careful that the PA function does not cause any
    inconvenience or disturbance for others in your area.

    REVERSE FEATURE (Default “OFF” for USA version)
    The Reverse feature reverses transmit and receive frequencies while working through a
    repeater.
    It is often helpful to be able to check the uplink (input) frequency of a repeater, to see if the
    calling station is within direct (“Simplex”) range.
    1. Press the top panel
    /
    key to select “REVERSE”.
    2. Press the
    key to activate the Reverse feature.
    The “ ” or “ ” or “
    ” icon will blink while “Reverse”
    shift is activated.
    3. Press the
    key again to revert to the “Normal” shift direction.

    FTM-10R OPERATING MANUAL

    29



  • Page 32

    SMART MENU FEATURES
    SCAN

    FEATURE

    1. Press the top panel
    /
    key to select “SCAN”.
    2. Press the
    key to initiate upward scanning.
    When the scanner encounters a signal strong enough to open
    the squelch, the scanner will halt for five seconds, and then
    resume scanning.
    3. To stop the scanner, press the
    or PTT key.
    key function is set to “SCAN” via the top panel
    /
    key, the
    key
    When the
    may be used as the scan start/stop command key.
    If you want to change the direction of the scan while it is underway, rotate the DIAL
    knob one click in the opposite direction (in this case, one click counter-clockwise). You
    will see the scanner reverse direction and scan down in frequency.
    The decimal point of the frequency display will blink while the Scan is activated.
    You may select the Scan Resume mode via the Menu Item “F32 SCN MODE”.
    When you start the scanner in the memory mode, only the memorized memory channels
    will be scanned

    SMART SEARCHTM OPERATION
    The Smart Search feature allows you to load frequencies automatically according to where
    activity is encountered by your radio. When Smart Search is engaged, the transceiver will
    search above and below your current frequency, storing active frequencies as it goes (without stopping on them even momentarily). These frequencies are stored into a special Smart
    Search memory bank, consisting of 31 memories (15 above the current frequency, 15 below the current frequency, plus the current frequency itself). All channels where activity is
    present will be loaded into the Smart Search memories. The search will stop after one
    sweep in each direction, whether or not all 31 memories are filled.

    Storing Smart Search Memories
    1. Set the radio to the VFO mode. Be sure that you have the Squelch adjusted properly (so
    that band noise is quieted).
    2. Press the top panel
    /
    key to select “SSCH”.
    key to initiate upward scanning.
    3. Press the
    4. As active channels are detected, they will automatically be
    stored into the Smart Search memory bank without causing the sweep to halt.
    If you want to change direction of the Smart Search while it is underway, rotate the
    DIAL knob one click in the opposite direction (in this case, one click counter-clockwise). You will see the scanner reverse direction and Smart Search down in frequency.
    5. The Smart Search scan will eventually terminate, and the LCD will revert to Smart
    Search Memory Channel “<C >”.

    30

    FTM-10R OPERATING MANUAL



  • Page 33

    SMART MENU FEATURES

    Number of Smart Search Memories.
    <C> is the start frequency of the Smart Search.

    6. To recall the Smart Search memories, just rotate the DIAL knob (or press the microphone’s
    [UP]/[DWN] key) to choose from among the Smart Search memories.
    7. Press the front panel
    key to return to VFO mode with the current frequency of the
    Smart Search memory.
    Note: 1) Smart Search is a great tool when visiting a city for the first time. You don’t
    need to spend hours looking up repeater frequencies from a reference guidebook.
    Just ask your FTM-10R where the action is!
    2) The Smart Search memories are so-called “soft” memories. They will be lost if
    you initiate a new Smart Search sweep of the band, or if you switch to the VFO or
    Memory mode.

    SQUELCH LEVEL ADJUST
    Adjust the squelch level to mute the noise from the speaker when no signal is being received.
    /
    key to select “SQL LEVL”.
    1. Press the top panel
    The current squelch level will be displayed.
    2. Press the
    key.
    3. Rotate the DIAL knob just to the point where the noise is
    BUSY
    silenced and the front panel green “BUSY
    BUSY” indicator turns
    off.
    Available selections are:
    Amateur Bands:
    OFF
    MIN
    01 ~ 06
    MAX (Default: 01)
    AM/FM Broadcast Bands:
    OFF
    MIN
    01 ~ 03
    MAX (Default; AM: 01, FM: 02)
    If the DIAL knob is set further clockwise, sensitivity to weak signals is reduced.
    4. Press the
    key to save the new setting and return to the VFO or Memory Channel
    mode.
    When the
    key function is set to “SQL LEVL” via the top panel
    /
    key, the
    key may be used as the Squelch Level control key.

    FTM-10R OPERATING MANUAL

    31



  • Page 34

    SMART MENU FEATURES
    TCALL (Default “OFF” for USA version)
    You may enable TCALL if the repeaters in your country require a 1750-Hz burst tone for
    access.
    1. Press the top panel
    /
    key to select “TCALL”.
    2. Press the
    key.
    The transmitter will automatically be activated, and a 1750-Hz audio tone will be superimposed on the carrier.
    3. You may release the
    key, and use the PTT key for activating the transmitter thereafter.

    TX POWER SELECT
    Set the TX Power level to reduce battery drain and use the lowest power necessary to
    maintain reliable communications.
    1. Press the top panel
    /
    key to select “TX POWER”.
    2. Press the
    key repeatedly to select the desired transmit
    power level.
    You may set the transmit power level for the 144 MHz and
    430 MHz band individually.
    HIGH MID LOW
    144 MHz 50 W
    20 W 5 W
    430 MHz 40 W
    3. Two seconds after selecting the transmitter power level, the new setting is automatically
    saved and the radio returns to the VFO or Memory Channel mode.
    When the
    key function is set to “TX POWER” via the top panel
    /
    key, the
    key may be used as the Transmit Power Level control key.

    INTERCOM VOLUME CONTROL
    1. Press the top panel
    /
    key to select “VOL.ITCOM”.
    key to change the Intercom receiver audio volume level between “HIGH”
    2. Press the
    and “LOW”.
    3. Two seconds after selecting the Intercom receiver audio volume level, the new setting is
    automatically saved and the radio returns to the VFO or Memory Channel mode.
    When the
    key function is set to “VOL.ITCOM” via the top panel
    /
    key, the
    key may be used as the Intercom Volume control key.

    32

    FTM-10R OPERATING MANUAL



  • Page 35

    MEMORY OPERATION
    Many memory resources are available on the FTM-10R. A total of 500 memories are available, and each may be appended with an alphanumeric label of up to eight characters, for
    quick channel recognition.
    The FTM-10R has two methods of the Memory Mode; (1) Group Memory Mode enables
    the recall of all memory channels, and (2) In-band Memory Mode enables the recall of
    memory channels, which are stored in the same operating band.

    MEMORY STORAGE
    To store a frequency into memory:
    1. Press the front panel
    /
    keys to select the desired operating band.
    2. Rotate the DIAL knob to select the desired operating frequency.
    3. Press and hold in the
    key for one second.
    A “MIN” notation will appear on the display and the frequency display will blink.
    After 5 seconds of pressing the
    key, will return to the
    VFO mode.
    4. Within 5 seconds of pressing the
    key, press the
    key again, this time briefly, to
    store the displayed data into the memory channel slot. The “MIN” notation will disappear (since you are still operating in the VFO mode).
    U A “MIN” notation will appear on the display and the frequency display will blink.
    U The FTM-10R will automatically store the channel frequency and data into the vacant memory channel.
    U FTM-10R can memorize the following items with the frequency at the same time:
    P Memory Group Information
    P Alpha-numeric Memory Channel Tag
    P Repeater Shift (Direction and Shift Frequency)
    P CTCSS/DCS Squelch System and its frequency and code
    P Transmit Output Power Level
    P Scan Mode (Skip Scan or Preferential Scan)
    P Frequency Step
    P Semi-Duplex (Odd) frequency
    P Receiving Mode (AM or FM)
    Important Note: On rare occasions the memorized data may become corrupted by miss
    operation, or static electricity. When repairs are made the memory data
    may be lost. Please write down or record the memorized information so
    you will be able to restore it if needed.

    FTM-10R OPERATING MANUAL

    33



  • Page 36

    MEMORY OPERATION
    MEMORY RECALL
    Once you have stored the desired memories, you may switch from “VFO” mode to “Memory
    Recall” mode, and operate on just the stored memory channels.
    The FTM-10R has two methods of recalling the memory. (1) Group Memory Mode enables you to recall all the Memory Channels and (2) In-band Memory Mode enables you to
    recall only the memory channels which are stored within the same operating band.

    All Memory Channel Recall (Group Memory Mode)
    1. To recall the Group Memory bank, press the front panel
    /
    keys until the “GRP” notation appears at the upper left corner in the display for a moment. This indicates
    that the “Group Memory bank” is now recalled.
    2. Rotate the DIAL knob to select the desired memory channel. You may recall any of the
    channels stored in the FTM-10R memories.
    3. To exit from the Memory Recall mode, press the front panel
    /
    keys to select the
    desired operating band.
    Important Note: The memory channel is assigned to a Group Memory bank automatically.
    You may assign/eliminate the memory channel to/from the Group Memory
    bank. See page 36 for details of the operation.

    Recall a memory channel which is stored in the same operating band
    (In-band Memory Mode)
    1. Press the front panel
    /
    keys to recall the desired operating band.
    If you want to recall the 144 MHz band’s memory channel, press the front panel
    /
    keys to recall the “H-V” icon.
    If you want to recall the 430 MHz band’s memory channel, press the front panel
    /
    keys to recall the “H-U” icon.
    2. Press the front panel
    key briefly. A “-MEMORY-” notation will appear on the display
    for a moment. This indicates that the “Memory Recall” mode is now engaged.
    3. Rotate the DIAL knob to select the desired memory channel. You may recall a memory
    channel which is stored in the same operating band of the FTM-10R.
    4. To exit from the Memory Recall mode, press the front panel
    key to return to the
    VFO mode.

    34

    FTM-10R OPERATING MANUAL



  • Page 37

    MEMORY OPERATION
    MEMORY CHANNEL CUSTOMIZATION
    The memory channel data can be customized using the following functions.
    M 1 GROUP
    Example : Select the “M
    GROUP”

    No.

    Display

    M 1

    GROUP

    M 2

    MEM CH

    M 3

    MEM SORT

    M 4
    M 5
    M 6
    M 7
    M 8
    M 9
    M10
    M11
    M12
    M13

    MEM TAG
    SCN TYPE
    SKIPONLY
    SQL LEVL
    SQL TSQF
    SQL DCS
    SQL TYPE
    TX SHIFT
    TX POWER
    DELETE

    Function
    Assigns/Eliminates the memory channel to/from the Memory
    Group Memory bank.
    Changes the memory channel number to the desired vacant
    memory channel number.
    Sorts and renumbers the Memory Channels by frequency, from
    low to high.
    Appends an Alphanumeric “Tag” (label) to a memory channel.
    Sets the Scan Type (Skip Memory or Preferential Memory).
    Set the Preferential Scan List.
    Sets the Squelch Threshold Level.
    Change the CTCSS Tone Frequency.
    Change the DCS Code.
    Change the Squelch Type (CTCSS or DCS).
    Stores an independent (in band) transmit frequency (Odd Split).
    Change the Transmitter Power Level.
    Deletes memorized data (except CLUB memory channel).

    FTM-10R OPERATING MANUAL

    35



  • Page 38

    MEMORY OPERATION
    MEMORY GROUP BANK
    In the FTM-10R, the memory channel is assigned to the Group Memory Bank automatically. The Group Memory Bank can be recalled by pressing the front panel
    /
    key (A
    “GRP” notation appears at the upper left corner in the display for a moment.). You may
    observe the Group Memory Bank between the Audio Line and 2 m Amateur Band.
    You may assign/eliminate the memory channel to/from the Group Memory Bank. The eliminated memory channel is only recalled by recalling the memory channel, which is stored in
    the same operating band.

    To eliminate the memory channel from the Group Memory bank:
    1. Recall the memory channel you wish to delete from the Group Memory Bank.
    2. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    3. Rotate the DIAL knob to select Menu Item “M1 GROUP”.
    Press the
    key briefly, then rotate the DIAL knob to select “OFF”; this deletes the current memory channel from
    the Group Memory bank.
    4. Press the [VOL/SEL] key to save the new setting and return to the memory recall mode.

    To re-assign the eliminated memory channel into the Group Memory bank:
    1. Press the front panel
    key to switch to the VFO mode, if needed.
    2. Press the front panel
    /
    keys to recall the operating band which is the same band
    as the eliminated memory channel.
    3. Press the front panel
    key again to switch to the “Memory Recall” mode, and then
    rotate the DIAL knob to select the memory channel you wish to re-assign into the Group
    Memory bank.
    4. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    5. Rotate the DIAL knob to select Menu Item “M1 GROUP”.
    ON
    6. Press the
    key briefly, then rotate the DIAL knob to select “ON
    ON”; the current memory
    channel will be assigned into the Group Memory bank.
    7. Press the [VOL/SEL] key to save the new setting and return to the memory recall mode.

    36

    FTM-10R OPERATING MANUAL



  • Page 39

    MEMORY OPERATION
    MEMORY CHANNEL NUMBER CHANGE
    You may change the memory channel number to a desired vacant memory channel manually.
    1.
    2.
    3.
    4.
    5.
    6.

    7.
    8.

    Recall the memory channel on which you wish to change the Memory Channel number.
    Press and hold the
    key to enter the Memory Channel Customization mode.
    Rotate the DIAL knob to select Menu Item “M2 MEM CH”.
    Press the
    key briefly. The current memory channel number will appear in the display.
    Press and hold the
    key for one second.
    Rotate the DIAL knob to select the desired memory channel number.
    If you decide to cancel the Memory Channel Number
    Change, press the [VOL/SEL] key.
    If the channel number is blinking, that channel is currently
    “occupied” by other frequency data, and you should not
    select that channel.
    Press and hold the
    key to change the Memory Channel Number.
    [
    ]
    Press the VOL/SEL key to save the new setting and return to the memory recall mode.

    MEMORY CHANNEL SORT
    You may sort and renumber the Memory Channels by frequency, from low to high:
    1. Press the front panel
    key to switch to the Memory Recall mode, if needed.
    2. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    3. Rotate the DIAL knob to select Menu Item “M3 MEM
    SORT”.
    4. Press the
    key briefly, to display the confirmation message (“SORT Y”) on the LCD.
    If you decide to cancel the Memory Channel Sort, press the
    [VOL/SEL] key.
    5. Press and hold the
    key for one second to display the
    message (“SORTING”) on the LCD, then the FTM-10R is
    reset automatically and sorting is complete.

    FTM-10R OPERATING MANUAL

    37



  • Page 40

    MEMORY OPERATION
    LABELING MEMORY
    You may wish to append an Alphanumeric “Tag” (label) to a memory or memories, to aid in
    recollection of the channel’s use (such as a club name, etc.). This is easily accomplished
    using the Set (Menu) mode.
    1. Recall the memory channel on which you wish to append a label.
    2. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    3. Rotate the DIAL knob to select Menu Item “M4 MEM TAG”.
    4. Press the
    key briefly, then rotate the DIAL knob to select “ALPHA”.
    5. Press and hold the
    key for one second to display the
    previous label.
    6. Press the PTT key to clear any previous label, if needed.
    7. Rotate the DIAL knob to select the first digit of the desired label.
    8. Press the
    key to move to next character.
    9. Repeat steps 6 and 7 to program the remaining letters, numbers, or symbols of the
    desired label. A total of eight characters may be used in the creation of a label.
    10. If you make a mistake, press the
    key to backspace the cursor, then re-enter the
    correct letter, number, or symbol.
    Press the PTT key to delete all data after the cursor that may have been previously
    stored erroneously.
    11. When you have programmed a label that is under eight characters, press and hold in the
    key for one second, until the “ALPHA” notation appears.
    12. Press the [VOL/SEL] key to save the label and return to the memory recall mode. The
    label (Alpha-Numeric Tag) will now be displayed.
    To disable the Alpha-Numeric Tag (enabling the frequency display):
    1. Recall the memory channel on which you wish the frequency to display.
    2. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    3. Rotate the DIAL knob to select Menu Item “M4 MEM TAG”.
    4. Press the
    key briefly. Then, rotate the DIAL knob to select “FREQ”.
    5. Press the [VOL/SEL] key to return to the memory recall mode. The memory channel
    frequency will now be displayed.

    38

    FTM-10R OPERATING MANUAL



  • Page 41

    MEMORY OPERATION
    SCAN TYPE
    The FTM-10R has two methods of performing Memory Channel Scan; (1) All Memory
    Channel Scanning and (2) Scanning only memory channels which are selected via the Skip/
    Preferential memory setting (see next step).
    1. Press the front panel
    key to switch to the Memory mode, if needed.
    2. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    3. Rotate the DIAL knob to select Menu Item “M5 SCN TYPE”.
    4. Press the
    key briefly.
    5. Rotate the DIAL knob to select desired Scan Type:
    The FTM-10R scans on all Memory Channels.
    ONLY MEM: The FTM-10R scans only the memory channels that are appended with the “ONLY” flag
    via the Skip/Preferential memory setting.
    6. Press the [VOL/SEL] key to return to the memory recall
    mode. The memory channel frequency will now be displayed.
    ALL MEM:

    SKIP/PREFERENTIAL SCAN SETTING
    The FTM-10R allows you to set up a “Preferential Scan List”. You can “flag” channels
    within the memory system. When you initiate the Preferential Memory Scan, only “flagged”
    channels will be scanned.
    1. Recall the memory channel that you wish to skip. (or Preferential Memory Channel).
    2. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    3. Rotate the DIAL knob to select Menu Item “M6 SKIPONLY”.
    4. Press the
    key briefly.
    5. Rotate the DIAL knob to select the desired Scan Type:
    SKIP: This memory channel is skipped during memory
    channel scans.
    ONLY: This memory channel scans during preferential
    memory scans.
    OFF: This memory channel scans during memory channel scan.
    6. Press the [VOL/SEL] key to return to the memory recall mode. The memory channel
    frequency will now be displayed.

    FTM-10R OPERATING MANUAL

    39



  • Page 42

    MEMORY OPERATION
    SQUELCH LEVEL
    The FTM-10R allows setting the squelch threshold level.
    key to switch to the Memory mode, if needed.
    1. Press the front panel
    2. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    3. Rotate the DIAL knob to select Menu Item “M7 SQL LEVL”.
    4. Press the
    key briefly. Then rotate the DIAL knob to
    select the desired squelch threshold level (“SQL OFF” ~ “SQL
    MAX”).
    5. Press the [VOL/SEL] key to save the new setting and return to the memory recall mode.

    CTCSS FREQUENCY
    The FTM-10R enables you to change the CTCSS Tone frequency.
    1. Recall the memory channel on which you wish to change the CTCSS Tone Frequency.
    2. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    3. Rotate the DIAL knob to select Menu Item “M8 SQL TSQF”.
    4. Press the
    key to display the current CTCSS Tone Frequency.
    5. Rotate the DIAL knob to select desired CTCSS Tone Frequency.
    6. Press the [VOL/SEL] key to save the new setting and return to the memory recall mode.
    CTCSS TONE FREQUENCY (Hz)
    67.0
    69.3
    71.9
    74.4
    77.0

    40

    79.7
    82.5
    85.4
    88.5
    91.5

    94.8
    97.4
    100.0
    103.5
    107.2

    110.9
    114.8
    118.8
    123.0
    127.3

    131.8
    136.5
    141.3
    146.2
    151.4

    156.7
    159.8
    162.2
    165.5
    167.9

    171.3
    173.8
    177.3
    179.9
    183.5

    186.2
    189.9
    192.8
    196.6
    199.5

    203.5
    206.5
    210.7
    218.1
    225.7

    229.1
    233.6
    241.8
    250.3
    254.1

    FTM-10R OPERATING MANUAL



  • Page 43

    MEMORY OPERATION
    DCS CODE
    The FTM-10R enables you to change the DCS Tone Code.
    1. Recall the memory channel on which you wish to change the DCS code.
    2. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    3. Rotate the DIAL knob to select Menu Item “M9 SQL DCS”.
    4. Press the
    key to display the current DCS Code.
    5. Rotate the DIAL knob to select desired DCS Tone Code.
    6. Press the [VOL/SEL] key to save the new setting and return to the memory recall mode.

    023
    025
    026
    031
    032
    036
    043

    047
    051
    053
    054
    065
    071
    072

    073
    074
    114
    115
    116
    122
    125

    131
    132
    134
    143
    145
    152
    155

    156
    162
    165
    172
    174
    205
    212

    223
    225
    226
    243
    244
    245
    246

    DCS CODE
    251 271 332
    252 274 343
    255 306 346
    261 311 351
    263 315 356
    265 325 364
    266 331 365

    371
    411
    412
    413
    423
    431
    432

    445
    446
    452
    454
    455
    462
    464

    465
    466
    503
    506
    516
    523
    526

    532
    546
    565
    606
    612
    624
    627

    631
    632
    654
    662
    664
    703
    712

    723
    731
    732
    734
    743
    754
    -

    CTCSS/DCS OPERATION
    The FTM-10R enables you to change the CTCSS/DCS operation (CTCSS/DCS mode,
    CTCSS Tone frequency, and DCS Tone Code) that was set previously.
    1. Recall the memory channel on which you wish to change the CTCSS/DCS operation.
    2. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    3. Rotate the DIAL knob to select Menu Item “M10 SQL
    TYPE”.
    4. Press the
    key to display the current CTCSS/DCS operation mode.
    5. Rotate the DIAL knob to select desired CTCSS/DCS operation mode.
    TONE ENC: Activates the CTCSS Encoder
    TONE SQL: Activates the CTCSS Encoder/Decoder
    REV TONE: Activates the Reverse CTCSS Decoder (Mutes receiver when matching tone
    is received)
    DCS:
    Activates the Digital Coded Encoder/Decoder
    OFF:
    Disable the CTCSS/DCS operation
    6. Press the [VOL/SEL] key to save the new setting and return to the memory recall mode.

    FTM-10R OPERATING MANUAL

    41



  • Page 44

    MEMORY OPERATION
    STORING INDEPENDENT TRANSMIT FREQUENCY (ODD SPLIT)
    All memories can store an independent (in band) transmit frequency.
    The FTM-10R has two methods of the Storing Independent Transmit Frequency; (1) Using
    the Standard Repeater Shift and (2) Using the Odd Split Memory for operation on repeaters
    with non-standard shift.

    Using the Standard Repeater Shift
    1. Press the
    key to enter the memory mode. Then recall the memory channel on which
    you wish to store the Independent Transmit Frequency.
    2. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    3. Rotate the DIAL knob to select Menu Item “M11 TX SHIFT”.
    4. Press the
    key briefly.
    5. Rotate the DIAL knob to select desired shift direction. Available selections are “RPTR -”, “RPTR +”, and “SIMPLEX”.
    6. Press the [VOL/SEL] key to save the new setting and return to the memory recall mode.
    Whenever you recall a memory which contains independently stored transmit and receive frequencies, the “
    ” indication will appear on the display.

    Using the Odd Split Memory
    1. In VFO mode, tune to your desired transmit frequency. (Your transmit frequency should
    be in the same band as the receive frequency).
    2. Press the
    key to enter the memory mode. Then recall the memory channel on which
    you wish to store the Independent Transmit Frequency.
    3. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    4. Rotate the DIAL knob to select Menu Item “M11 TX SHIFT”.
    5. Press the
    key briefly.
    6. Rotate the DIAL knob to select “S-DUPLEX”.
    7. Press the [VOL/SEL] key to save the new setting and return to the memory recall mode.
    Whenever you recall a memory which contains independently stored transmit and receive frequencies, the “

    indication will appear on the display.

    42

    FTM-10R OPERATING MANUAL



  • Page 45

    MEMORY OPERATION
    TRANSMITTER POWER LEVEL
    The FTM-10R enables you to set the Transmitter Power Level for each memory channel
    individually.
    1. Recall the memory channel on which you wish to set the Transmitter Power Level.
    2. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    3. Rotate the DIAL knob to select Menu Item “M12 TX
    POWER”.
    4. Press the
    key briefly to display the current Transmitter
    Power Level.
    5. Rotate the DIAL knob to the select desired Transmitter Power Level (“LOW”, “MID”, or
    “HIGH”).
    6. Press the [VOL/SEL] key to save the new setting and return to the memory recall mode.
    HIGH MID LOW
    144 MHz 50 W
    20 W 5 W
    430 MHz 40 W

    DELETING MEMORY
    You may delete the memorized data (except CLUB memory channel) of the FTM-10R
    memories.
    1. Recall the memory channel on which you wish to delete.
    2. Press and hold the
    key for one second to enter the Memory Channel Customization
    mode.
    3. Rotate the DIAL knob to select Menu Item “M13 DELETE”.
    4. Press the
    key briefly to display the confirmation message (“DELETE Y”) on the LCD.
    If you decide to cancel the Erasure of Memory Data, press
    the [VOL/SEL] key.
    key for one second. The display will
    5. Press and hold the
    revert to memory mode.
    Note: Once deleted, the channel data can not be recovered.

    FTM-10R OPERATING MANUAL

    43



  • Page 46

    CLUB CHANNEL OPERATION
    The FTM-10R has a special memory channel called “Club Channel”, and the following
    features can be handy.
    The “Club Channel” is displayed at the first of the Group
    Memory Bank and “CLB” is indicated when the channel is recalled. The Club Channel can also be reprogrammed.
    U Monitoring the “Club Channel” periodically. (Club Channel Monitor function)
    There are two (2) methods for this feature.
    1. While monitoring the other memory channel, periodically checking the “Club Channel”. (See below)
    2. While listening to the AM or FM broadcast stations or the external audio input signal , periodically checks the “Club Channel”. (See page 62)
    U Message transmission function (See page 46)
    U Duplicate the memorized messages and the ID of the members registered in the radio.
    (Message Clone function. See page 48)
    U Duplicate the memory channel and other setting information to other radios. (Clone
    function. See page 50)

    Recalling the Club Channel
    1. Press the front panel
    /
    key to recall the Group
    Memory Bank (“GRP” notation will appear at the upper
    left corner in the display for a moment).
    When the display indicates the Clock, Stop Watch Timer,
    or Temperature, press the [VOL/SEL] key to change to the VFO or memory mode, then
    perform the above selection.
    2. Rotate the DIAL knob to select the Club Channel (The “CLB”
    notation will appear at the upper left corner in the display
    for a moment, then change to “GRP” notation).
    You may change the Club channel frequency to your desired frequency.

    Activating the Club Channel Monitor
    This function monitors the “Club Channel” periodically once each 3 seconds while listening to another memory channel or a VFO frequency. Once a signal is received on the “Club
    Channel”, the FTM-10R automatically receives the “Club Channel” signal continuously
    until the signal disappears.
    Note: The “Club Channel” is only watched once per 3 seconds, and a signal sent on the
    “Club Channel” may be missed. If the “Club Channel” needs to be monitored with
    higher priority, this mode is not recommended. Please note that while listening to the
    AM or FM broadcast band or the external audio input signal, the “Club Channel” is

    44

    FTM-10R OPERATING MANUAL



  • Page 47

    CLUB CHANNEL OPERATION
    watched periodically, and the signal on the “Club Channel” is received.
    When “Club Channel” function is activated, a noise may be heard every time the
    “Club Channel” is watched (once per 3 seconds). This noise is caused by checking
    the “Club Channel” for any signals. This is not a problem or defect of the radio.
    1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    If the display indicates the Clock, Stop Watch Timer, or Temperature, press the [VOL/
    SEL] key and change to the VFO or memory mode, then perform above step.
    2. Rotate the DIAL knob to select Menu Item “F10 CLUB PRI”.
    3. Press the
    key to enable selection of this Menu Item.
    4. Rotate the DIAL knob to select the desired operating mode:
    AUTO: The FTM-10R checks the “Club Channel” each 3
    seconds. When a signal is received on the “Club
    Channel”, the FTM-10R will monitor the channel
    until the signal drops. When the signal drops, the
    FTM-10R will resume checking the “Club Channel” each 3 seconds.
    HOLD: When a signal is received on the “Club Channel”, the FTM-10R receives the
    “Club Channel” continuously, and will not restart the “Club Channel” monitor.
    OFF: Disables the Club Channel Monitor feature.
    5. Press the [VOL/SEL] key for one second to save the new setting and activate Club
    Channel Monitor.
    When the Club Channel Monitor is activated, the “PRI” icon will appear (if receiving
    on the VFO or memory channel) or blink (if receiving on the “Club Channel”) on the
    display.
    When the PTT key is pressed, the FTM-10R will transmit on the “Club Channel”.
    You may change the VFO frequency or memory channel while Club Channel Monitor
    is active.
    6. To disable the Club Channel Monitor, select “OFF” as in step 4 above.
    Return to the VFO or Memory Channel mode.
    When the “AUTO” mode is selected in step 4 above, press the
    key to return to the
    VFO or Memory Channel mode while receiving the “Club Channel”.
    The difference between “Club Channel Monitor” and “AF DUAL” feature.
    (1) The “Club Channel Monitor” feature watches a club channel every 3 seconds
    while you are listening to an AM/FM broadcast station or an amateur band signal.
    (2) The “AF DUAL” feature always receives the Club channel, even if you are listening to the AM/FM broadcast band, audio or an amateur band signal. Two receivers
    are included. One is for AM/FM reception and the other is for the amateur bands.
    You will never miss a signal on the Club Channel, ever.

    FTM-10R OPERATING MANUAL

    45



  • Page 48

    MESSAGE FEATURE
    While operating on the Club Channel, a message (up to 16 characters) can be sent, instead
    of sending a voice. 20 kinds of messages can be programmed, and one of them can be
    selected and transmitted with your ID.
    Note: The Message Feature requires that all members (1) use the FTM-10R transceiver, (2)
    store the same messages into the message slot, (3) store the same member list into the
    member box, and (4) store the desired coordination frequency into the “Club Channel”.
    The Message Feature does not send the Message through the repeater.
    The Message Feature is not active when the CTCSS, DCS, or Pager is activated.

    PROGRAMMING A MESSAGE
    (Requires all members to set the same message into the same message slot in the same order.)
    The FTM-10R has 20 message slots, including a factory-programmed message (EMERGENCY). The factory-programmed message of course can be overwritten at any time with
    personalized messages.
    1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    When the display indicates the Clock, Stop Watch Timer, or Temperature, press the
    [VOL/SEL] key to change to the VFO or memory mode, then perform the above.
    2. Rotate the DIAL knob to select Menu Item “F18 MESSAGE”.
    3. Press the
    key to enable selection of this Menu Item.
    4. Rotate the DIAL knob to select the desired Message slot
    into which you wish to store a message. The LCD displays
    the previously stored message.
    5. Press and hold the
    key for one second.
    Number of Message
    Press the PTT key to clear the previously stored message,
    if desired.
    6. Rotate the DIAL knob to select the first character of the
    message you wish to store, and then press the
    key briefly
    to save the first character of the message and move on to
    the next place.
    7. Repeat the previous step to complete the message (up to 16
    characters). If you make a mistake, press the
    key to move back to the incorrect
    character, then re-enter the correct character.
    Press the PTT key to delete all data after the cursor that may have been previously
    stored erroneously.
    8. When the Message entry is complete, press and hold in the
    key for one second.
    If you decide to cancel programming a message, press the [VOL/SEL] key to exit to
    normal operation.
    9. If you wish to store another message, repeat steps 4 through 8 above.
    10. Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    46

    FTM-10R OPERATING MANUAL



  • Page 49

    MESSAGE FEATURE
    PROGRAMMING A MEMBER LIST
    (Requires all members set the same member list (includes own ID) into the same member
    box in the same order.)
    It is possible to register a maximum of 20 persons, in order to identify the sender. When
    you receive a message transfer, you can know who sent the message by the ID in the register. In addition, your ID can be sent to the members when you transmit any messages to
    them.
    If all the members share the register information (ID), the message sender ID will be shown
    on the display when receiving the message.
    Even if no IDs are registered, the function can work. In this case “MEMBER 1” though
    “MEMBER 20” will be displayed, when receiving a message.
    We recommend that you use your call sign for the member list.
    1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    When the display indicates the Clock, Stop Watch Timer, or Temperature, press the
    [VOL/SEL] key to change to the VFO or memory mode, then perform the above step.
    2. Rotate the DIAL knob to select Menu Item “F16 ID LIST”.
    3. Press the
    key to enable selection of this Menu Item.
    4. Rotate the DIAL knob to select the desired member box (1
    ~ 20) into which you wish to store a member ID. The LCD
    will display the previously stored member ID.
    5. Press and hold the
    key for one second.
    Press the PTT key to clear the previously stored member
    ID, if desired.
    Number of Member box
    6. Rotate the DIAL knob to select the first character of the
    personal ID you wish to store, and then press the
    key
    briefly to save the first character of the personal ID and
    move on to the next place.
    7. Repeat previous step to complete the personal ID (up to 8
    characters). If you make a mistake, press the
    key to
    move back to the incorrect character, then re-enter the correct character.
    Press the PTT key to delete all data after the cursor that may have been previously
    stored erroneously.
    8. When the personal ID entry is complete, press and hold in the
    key for one second.
    If you decide to cancel programming a member ID, press the [VOL/SEL] key, exit to
    normal operation.
    9. If you wish to store another personal ID, repeat steps 4 through 8 above.
    10. Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    FTM-10R OPERATING MANUAL

    47



  • Page 50

    MESSAGE FEATURE
    CLONING THE MESSAGE
    It is possible to copy/duplicate the programmed messages, and all the IDs of the members,
    when using the “Message” function.
    If messages (max 20 messages) and IDs (max 20 persons) are programmed in only one
    transceiver (FTM-10R), the information can be copied to the transceivers of all members at
    once, without connecting any cables.
    Note: This message clone function will only operate using the Club Channel frequency in
    the 440 MHz amateur band.
    Recall and monitor the Club Channel frequency. If the channel is busy and any signal
    is heard, the message clone function cannot work correctly. Change the Club Channel to a frequency not in use, and clone the messages and the IDs.

    Preparations (Source Transceiver)
    1. Turn the transceiver off.
    2. Press and hold the PTT key while turning the power on
    again.
    3. The “TX CLONE” notation and the Club Channel frequency
    appear on the display alternately.

    Preparations (Destination Transceiver)
    1. Turn the transceiver off.
    2. Press and hold the [VOL/SEL] key while turning the power
    on again.
    3. Rotate the DIAL knob to select the “SF2 COPY MSG”.

    Cloning
    1. Bring the Source Transceiver and the Destination Transceiver as close as possible.
    2. Press the top panel
    key on the Source Transceiver.
    The Destination Transceiver does not require any set up operation.
    When receiving clone data from the “Source Transceiver”, the “Destination Transceiver”
    automatically stores all the data. The LED blinks for 3 seconds with a blue color, then
    displays “MSG” and “RECEIVED” on the LCD. The “Destination Transceiver” automatically turns off and on, then returns to normal operation and mode set before the
    Clone operation began. The copy/clone procedure is completed.
    After completion of the copy/cloning, set your “MY ID” (see page 49). By setting the “MY
    ID”, your ID will be displayed with the messages you send.
    If “ERROR” is displayed on the LCD screen during the Clone procedure, the cloning has
    not completed correctly. In this case, first turn the radio off and back on, then try the cloning
    procedure again. In this case, please be aware of the following advice.
    P The distance between the source transceiver and destination transceiver must be close.
    P Signals on the Club Channel frequency may interrupt the data transfer.
    P Any equipment that generates electrical noise may interrupt the data transfer.

    48

    FTM-10R OPERATING MANUAL



  • Page 51

    MESSAGE FEATURE
    SET YOUR PERSONAL ID
    To choose your personal ID from the member list.
    1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    When the display indicates the Clock, Stop Watch Timer, or Temperature, press the
    [VOL/SEL] key to change to the VFO or memory mode, then perform the above step.
    2. Rotate the DIAL knob to select Menu Item “F17 ID REG”.
    3. Press the
    key to enable selection of this Menu Item.
    4. Rotate the DIAL knob to select the member box (1 ~ 20)
    where your ID is stored.
    5. Press the [VOL/SEL] key to save the new setting and exit
    to normal operation.

    SENDING MESSAGES
    The registered message can be sent to the members who are receiving the Club Channel.
    When a message is sent, the transmitter’s ID will be sent also, and the receiver can identify
    who sent the message.
    Note: This “Message” function is only available on the Club Channel.
    The “MY ID” setting (see above) is required for the transmitter’s ID to be shown with
    the received message.
    1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    When the display indicates the Clock, Stop Watch Timer, or Temperature, press the
    [VOL/SEL] key to change to the VFO or memory mode, then perform above step.
    2. Rotate the DIAL knob to select Menu Item “F14 FKEY
    MOD”.
    3. Press the
    key to enable selection of this Menu Item.
    4. Rotate the DIAL knob to set this Menu Item to “FNC+MSG”
    or “MSG” (this will enable the selection of the transmit message with the top panel keys).
    5. Press the [VOL/SEL] key to save the new setting and exit
    to normal operation.

    To send a message:
    1. Press the front panel
    /
    to recall the Group Memory
    Bank (the “GRP” notation will appear at the upper left corner in the display for a moment).
    2. Rotate the DIAL knob to select the Club Channel (The “CLB”
    notation will appear at the upper left corner in the display
    for a moment).

    FTM-10R OPERATING MANUAL

    49



  • Page 52

    MESSAGE FEATURE
    When the Club Channel monitor feature is activated, steps 1 and 2 above are not necessary.
    3. Press the top panel
    or
    key to select the message you wish to send.
    4. Press the top panel
    key to transmit the selected message on the Club channel frequency.
    The “TXM” notation will appear on the display, and the
    message will be transmitted. It takes approximately 8 seconds to transmit the message.
    When the message transmission is completed, the TX/BUSY
    indicator glows white for one second.

    Receiving a Message
    1. To receive a message, press the front panel
    or
    key to recall the Club channel or
    activate the Club Channel monitor feature (see page 44).
    2. When you receive a message: a beep sounds, the TX/BUSY indicator blinks blue, and
    [“Message” from “sending station’s ID”] scrolls on the display.
    Press the
    ,
    , or
    key to clear the received message, and wait for a new message.

    CLONING
    You can transfer messages or all data stored in one FTM-10R to another FTM-10R by
    utilizing the handy “Cloning” feature. The FTM-10R’s Clone feature uses the radio link.
    No hardwire connection is needed.
    Note: The clone function is realized only by using the Club Channel frequency of 440 MHz
    amateur band. Recall and monitor the frequency of the Club Channel. If the channel
    is busy (some person is using the frequency and any signal is heard), the message
    clone function will not work correctly. In this case, change the Club Channel frequency. See page 52 for details.

    Preparations (Source Transceiver)
    1. Turn the transceiver off.
    2. Press and hold the PTT key while turning the power on
    again.
    The “TX CLONE” notation and the Club Channel frequency
    appear on the display alternately.

    Preparations (Destination Transceiver)
    1. Turn the transceiver off.
    2. Press and hold the [VOL/SEL] key while turning the power
    on again.
    3. Rotate the DIAL knob to select the “SF1 COPY ALL”.

    50

    FTM-10R OPERATING MANUAL



  • Page 53

    MESSAGE FEATURE
    Cloning
    1. Bring the Source Transceiver and the Destination Transceiver as close to each other as
    possible.
    2. Press the top panel’s PTT key on the Source Transceiver.
    While transmitting the clone data, the Source Transceiver’s
    LED blinks red and blinks the “SENDING” notation on the
    LCD.
    When clone data has finished transmitting, the Source
    Transceiver’s LED blinks white for around 3 seconds and
    then displays “ALL” and “SENT OUT” on the LCD. Then,
    the “TX CLONE” notation and the Club Channel frequency
    appears on the display alternately again.
    To finish the Cloning, turn the radio off by pressing and holding the [POWER] key for
    two seconds.
    3. The Destination Transceiver does not require any set -up operation.
    4. When receiving cloning data from the “Source Transceiver”, the “Destination Transceiver” automatically stores all the data, and the LED blinks white for 3 seconds, then
    displays “ALL” and “RECEIVED” on the LCD. Then, the
    “Destination Transceiver” turns off automatically, and turns
    on again. The radio returns to normal operation in the VFO
    or memory mode, as before the Clone operation began. The
    copy/clone procedure is completed.
    If “ERROR” is displayed on the LCD screen while doing the Clone procedure, the cloning process was not successful. In this case, turn the radio off and retry the cloning
    procedure. In the case of repeated cloning failures, see the following information.
    The distance of the transceivers (source transceiver and Destination Transceiver) has to
    be close.
    Check any equipment in the area that may be generating electrical noise. This may
    interrupt data transfer.

    FTM-10R OPERATING MANUAL

    51



  • Page 54

    MESSAGE FEATURE
    CHANGING THE CLUB CHANNEL FREQUENCY
    By factory default, the 439.900 MHz (EXP Version:433.500 MHz) frequency is stored in
    the Club Channel. If you wish to change the Club Channel, perform the following steps.
    ADVICE: For the “Club Channel”, any frequency in the 144 MHz or 440 MHz amateur
    bands can be programmed. However, the Message Clone function and the Clone
    function can work only on the 440 MHz band. When these functions are used,
    select the 440 MHz band.
    1. Press the front panel
    /
    key to recall the Group
    Memory Bank (“GRP” notation appears at the upper left
    corner in the display for a moment).
    When the display indicates the Clock, Stop Watch Timer,
    or Temperature, press the [VOL/SEL] key to change the VFO or memory mode, then
    perform the above selection.
    2. Rotate the DIAL knob to select the Club Channel (The “CLB”
    notation appears at the upper left corner in the display for
    two seconds, then changes to the “GRP” notation).
    3. Press and hold the
    key for one second to enter the Club
    Channel Customization mode.
    4. Rotate the DIAL knob to select Menu Item “C1 CLUB FRQ”.
    5. Press the
    key momentarily, to display the current memorized frequency of the Club Channel and the “SET” notation will be blinking.
    6. Press and hold the
    key for one second to enable the changing of the Club Channel
    frequency.
    The blinking “SET” notation changes to the blinking “CLB” notation.
    7. Rotate the DIAL knob to select the desired Club Channel frequency.
    You may change the operating band (430 MHz to 144 MHz, or vice versa) by pressing
    the front panel
    /
    keys.
    key for one second to save the new Club Channel frequency.
    8. Press and hold the
    The blinking “CLB” notation returns to the blinking “SET” notation.
    9. Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    52

    FTM-10R OPERATING MANUAL



  • Page 55

    CLOCK/TIMER OPERATION
    The FTM-10R has a 24-hour clock (accuracy: ±30 sec/month).
    With the Clock/Timer, you may operate the following features:
    P Clock feature: Display the current time.
    P Stop Watch Timer feature.

    SET UP THE CLOCK
    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F9 CLOCK”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to select “ON”.
    Press the [VOL/SEL] key to save the new setting and exit
    to normal operation.
    6. Press the [VOL/SEL] key repeatedly to display the Clock,
    Stop Watch Timer, or Thermometer.
    7. Rotate the DIAL knob to select the Clock.
    When the Clock is displayed in above step, this step is unnecessary
    8. Press and hold the [VOL/SEL ] key for one second to activate the Clock/Timer
    Customization mode.
    9. Rotate the DIAL knob to select Menu Item “T1 TIME ADJ.”
    10. Press the
    key to display the current time.
    11. Press and hold the
    key. You will notice the “hour” column blinking. Rotate the DIAL knob to set the exact current hour.
    12. Press the
    key to move the blinking column to “minute”.
    Rotate the DIAL knob to set the exact current minute.
    13. Press the
    key to save the new setting.
    key is pressed in accordance with the time
    When the
    signal from a radio station etc, the FTM-10R’s clock may
    be set more precisely.
    14. Press the [VOL/SEL] key to exit to normal operation.
    1.
    2.
    3.
    4.
    5.

    FTM-10R OPERATING MANUAL

    53



  • Page 56

    CLOCK/TIMER OPERATION
    DISPLAYS THE CURRENT TIME
    Activate the Clock
    1.
    2.
    3.
    4.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F9 CLOCK”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to select “ON”.

    Display the Clock
    1. Press the [VOL/SEL] key repeatedly to display the Clock, Stop Watch Timer, or Thermometer.
    2. Rotate the DIAL knob to display the Clock.
    When the Clock is already displayed in the above step, this
    step is unnecessary
    You may change the setting of the DIAL knob, so it does not return automatically to the
    Frequency Select dial function.
    P Press and hold the
    key for one second to reset the “Minute” and “Second” clock
    display to “00”.
    Example 1
    “XX:00:00” ~ “XX:29:59” to reset to “XX:00:00”
    “10:29:59” ¯ “10:00:00”
    Example 2
    “XX:30:00” ~ “XX:59:59” to reset to “XX+1:00:00”
    “10:49:49” ¯ “11:00:00”
    P You may change the time system via the Menu Item “T4 12H/24H”.
    Available selections are “12H” and “24H”
    P You may change the clock format via the Menu Item “T3 T FORMAT”.
    Available selections are “HH:MM:SS”, “HH:MM”, and “MM:SS”.
    P The accuracy of the clock on this radio is 30 seconds per month under the normal
    temperature. This accuracy depends on the temperature fluctuations in the place
    where the radio is used.
    P The clock has a back-up Lithium battery, and will function for around 2 months after
    disconnecting the power supply cable.

    54

    FTM-10R OPERATING MANUAL



  • Page 57

    CLOCK/TIMER OPERATION
    USING THE STOP WATCH TIMER
    The Stop Watch provides several timing functions for your convenience at motor sports and
    rallies.
    To operate the Stop Watch Timer, first activate a Clock function via the Menu mode “F9
    CLOCK”.
    1. Press the [VOL/SEL] key repeatedly to display the Clock, Stop Watch Timer, or Thermometer.
    2. Rotate the DIAL knob to display the Stop Watch Timer.
    This step is not necessary if the Stop Watch Timer is displayed in the above step.
    3. The Stop Watch Timer is designed to Start and Stop repeatedly whenever you press the
    key. The LED at the left of
    the DIAL knob blinks yellow while the Stop Watch Timer
    is counting.
    4. Press and hold the
    key for one second to reset the Stop Watch Timer.

    USING THE INTERVAL TIMER
    The Interval timer is similar to the Stop Watch Timer. It is synchronized with the Stop
    Watch Timer. To operate the Interval Timer, First activate a Clock function via the Menu
    mode “F9 CLOCK”.
    1. Press the [VOL/SEL] key repeatedly to display the Clock, Stop Watch Timer, or Thermometer.
    2. Rotate the DIAL knob to display the Interval Timer.
    This step is not necessary if the Stop Watch Timer is displayed in the above step.
    3. The Interval Timer (and Stop Watch Timer) is designed to
    Start and Stop repeatedly whenever you press the
    key.
    The LED at the left of the DIAL knob blinks yellow while
    the Interval Timer is counting.
    Press and hold the
    key for one second to reset both the Interval Timer and Stop
    Watch Timer.

    FTM-10R OPERATING MANUAL

    55



  • Page 58

    CONVENIENCE FEATURES
    MUTE FEATURE
    Press and hold the [VOL/SEL] key for one second to mute the receiver audio volume
    temporarily, without touching the volume (DIAL) knob. (The FTM-10R will shift to the
    Menu mode)
    To disable the MUTE feature, press the [VOL/SEL] key momentarily.

    LOCK
    Press the [POWER] key momentarily while the transceiver is turned on, the key lockout
    feature is activated, to prevent accidental frequency change.
    The “LOCK” notation appears on the display for one second.
    To unlock the key, press the [POWER] key again.
    The “UNLOCK” notation appears on the display for one second.
    You may also lock out the PTT key when the LOCK mode is
    activated via the Menu Item “F22 PTT LOCK”. See page 87.

    AUTOMATIC AUDIO VOLUME CONTROLLER
    The FTM-10R includes an Automatic Audio Volume Controller to allow the most comfortable and/or effective reception in noisy environments. To activate the Automatic Audio
    Volume Controller:
    1.
    2.
    3.
    4.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F1 AF AUTO”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to select the desired effect level.
    ON MIN: Activates the Automatic Audio Volume Controller with the low effect level.
    ON MID: Activates the Automatic Audio Volume Controller with the medium effect level.
    ON MAX: Activates the Automatic Audio Volume Controller with the high effect level.
    OFF:
    Disable the Automatic Audio Volume Controller.

    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    56

    FTM-10R OPERATING MANUAL



  • Page 59

    CONVENIENCE FEATURES
    AF-VFO FEATURE
    By default, the volume control (DIAL knob) and Clock display do not return to the frequency control automatically when you leave an interval of approximately three seconds.
    You may change the status of the DIAL knob so that the display will return automatically to
    the Frequency select dial function and Frequency display.
    1.
    2.
    3.
    4.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F5 AF-VFO”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to select the desired mode.
    TOGGLE:
    Keeps the DIAL knob function and display
    until the [VOL/SEL] key is pressed once again.
    AUTOBACK: The DIAL knob function and display comes
    back to frequency selection and frequency
    display approximately three seconds after.
    Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    VOX OPERATION
    The VOX system provides automatic transmit/receive switching based on voice input to the
    microphone. With the VOX system enabled, you do not need to press the PTT key in order
    to transmit.
    1.
    2.
    3.
    4.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F46 VOX MIC”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to select the one of the following
    microphone functions.
    R-HAND: Enable the VOX operation for the microphone
    which is connected to the rear panel MIC Jack.
    F-HAND: Enable the VOX operation for the microphone
    which is connected to the front panel MIC Jack.
    FRONT: Enable the VOX operation for the front panel microphone.
    VOX OFF: Disable the VOX operation.

    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.
    To disable the VOX operation, just repeat the above procedure, rotating the DIAL knob to
    select “VOX OFF” in step 4 above.
    P If the VOX feature is activated by background noise, adjust the VOX gain via the Menu
    Item “F47 VOX SENS”. See page 58 for details.
    P When the transceiver audio is output to the speaker, the VOX will not activate the
    transmitter even if you talk directly into the microphone.

    FTM-10R OPERATING MANUAL

    57



  • Page 60

    CONVENIENCE FEATURES
    VOX SENSITIVITY
    You may select the VOX sensitivity.
    1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    2. Rotate the DIAL knob to select Menu Item “F47 VOX SENS”.
    key to enable selection of this Menu item.
    3. Press the
    4. Rotate the DIAL knob to select the desired sensitivity.
    Available selections are “NORMAL”, “HIGH”, and “MAX”.
    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    LISTENING THE AM/FM BROADCAST STATION
    1. Press the front panel
    /
    keys to switch the operating band to AM or FM.
    2. Rotate the DIAL knob to select desired Broadcast station.
    P When a signal is weak and difficult to hear, in some cases you may be able to hear better
    by adjusting the squelch via the Menu Item “F38 SQL LEVL”. See page 31 for details.
    P When using the optional BH-1 Bluetooth® Headset with the FEP-4 Ear Phone or an aftermarket stereo speaker, you may enjoy stereo listening from the FM Stereo Broadcast
    Station or External Audio Input via the Menu Item “F42 STEREO”. See page 87 for details.
    P You may adjust the receiver audio responses via the Menu Item “F3 AF PITCH”. See
    page 85 for details.
    P You may set the Automatic Audio Volume Controller to allow the most comfortable
    and/or effective reception in noisy environments via the Menu Item “F1 AF AUTO”.
    See page 56 for details.
    P You may set the Volume Setting Alert feature via the Menu Item “F4 AF PRESET”.
    See page 86 for details.
    Note: When receiving AM Broadcast stations, the receive sensitivity may be poor when
    using an antenna designed with a matching system that is a low DC impedance between the center and shield of the coax. For better AM reception, use an antenna that
    does not present a low DC resistance to ground.

    TIME-OUT TIMER (TOT)
    The FTM-10R has the “Time-Out Timer” (TOT) feature that is designed to force the transceiver into the “receive” mode after a preset time of continuous transmission (the default is
    “OFF”). This feature prevents your transceiver from transmitting a “dead carrier” for a long
    time if the microphone PTT switch is accidentally locked in the “TX” condition. The Time-Out
    Timer “switch-to-receive” time may be adjusted from 1 to 30 minutes, or Off via Menu Item.
    1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    2. Rotate the DIAL knob to select Menu Item “F43 TOT”.
    3. Press the
    key to enable selection of this Menu Item.
    4. Rotate the DIAL knob to select the desired interval. Available selections are 1 to 30
    minutes, or Off.
    5. Press [VOL/SEL] key to save the new setting and exit to normal operation.
    When your transmission time is within 10 seconds of the Time-Out Timer expiration, an
    alert bell will provide an audible warning from the speaker.

    58

    FTM-10R OPERATING MANUAL



  • Page 61

    LISTENING TO EXTERNAL AUDIO INPUT
    The FTM-10R enables you to output the audio signal from the external audio equipment
    such as an iPod® to the speaker. You may operate on the amateur band while listening to
    your favorite music.
    1. Turn off the FTM-10R and external audio equipment.
    2. Connect the external audio equipment to the LINE IN Jack on the rear panel of the
    FTM-10R.
    3. Turn on the FTM-10R by pressing and holding the [POWER] key for two seconds.
    4. Press the front panel
    /
    key to select the “LINE-IN” band.
    5. Turn on the external audio equipment.
    P Press the [VOL/SEL] key to adjust the volume (AF level) of the audio output level.
    While the RED LED is on, the volume level can be adjusted with the dial knob.
    P The volume level is displayed on the LCD.
    P Adjust the audio input level at the external audio equipment side.
    P You may monitor the amateur band and external audio signal at the same time when
    you activate the Club Channel Monitor function.
    P You may enjoy stereo listening from external audio Input. Use the optional BH-1
    Bluetooth® Headset with the FEP-4 Ear Phone for BH-1 or an aftermarket stereo
    speaker, and set the Menu Item “F42 STEREO”. See page 87 for detail.
    When you have finished listening to the external audio, press front panel
    select another band.

    Audio output “L”
    GND

    FTM-10R OPERATING MANUAL

    /

    key to

    Audio output “R”

    59



  • Page 62

    Bluetooth® OPERATION
    Installation of the optional BU-1 Bluetooth® Adapter Unit will enable, the FTM-10R to
    send/receive voice messages with the optional BH-1 Bluetooth® Headset via wireless
    links.

    Pairing
    When using the Bluetooth® Headset for the first time, the Bluetooth® Headset and the
    FTM-10R must be paired.
    P Bring the Bluetooth® Headset and the FTM-10R close together when doing Pairing.
    1. Turn the transceiver off.
    2. Press and hold the [VOL/SEL] key while turning the power on again.
    3. Rotate the DIAL knob to select the Bluetooth® Adapter Unit you wish to pair.
    Main Chassis Bluetooth® Adapter Unit:
    Menu Item “SF6 BLTH R”
    Front Panel Bluetooth® Adapter Unit:
    Menu Item “SF7 BLTH F”

    4. Press the PTT key.
    The default PIN code (6111) appears.
    You may change the PIN code, if desired, before continuing with step 5.
    1. Press the PTT key, and then rotate the DIAL knob to set the first digit of the PIN
    code.
    2. Press the
    key to save the first digit of the PIN code and move on to the next
    place.
    3. Repeat the previous steps to complete the PIN code. If you make a mistake, press the
    key to move back to the incorrect number, then re-enter the correct number.
    5. Make sure that the BH-1 is off.
    6. Press and hold the power switch on the BH-1 Bluetooth® Headset for five seconds,
    until the BH-1’s indicator blinks red/blue alternately.
    7. Press the PTT key on the FTM-10R to initiate the pairing.
    8. If the pairing is successful (Requires a 20 to 30 seconds), “LINK OK” notation will
    appear on the display. The FTM-10R will turn off and back on again.
    When the BH-1 Bluetooth® Headset is correctly recognized by the FTM-10R , the
    BH-1’s indicator will blink blue.

    60

    FTM-10R OPERATING MANUAL



  • Page 63

    Bluetooth® OPERATION
    To activate Bluetooth®:
    1.
    2.
    3.
    4.

    Press and hold the [VOL/SEL] key for one second to activate the Menu Mode.
    Rotate the DIAL knob to select Menu Item “F8 BLU VOX”.
    key to enable selection of this Menu item.
    Press the
    Rotate the DIAL knob to select the desired Bluetooth®
    function:
    OFF:
    Disable the Bluetooth® function.
    PTT:
    Activate Bluetooth® function without the VOX feature.
    VOX HIGH:Activate Bluetooth® function with the VOX feature (VOX gain: High).
    VOX LOW: Activate Bluetooth® function with the VOX feature (VOX gain: Low).

    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.
    Effective Communications Range
    The communications range between the BH-1 and the FTM-10R is around 10m (33 ft).
    Obstacles between the BH-1 and the FTM-10R may shorten the communications distance.
    If you move out of range, the beeper sounds a low pitch tone. If you move back into
    range, the beeper sounds a high pitch tone.

    About the Bluetooth® Battery Indicator
    When the BH-1’s battery voltage becomes low, the BH-1’s indicator will blink red/blue
    alternately, the beeper will sound a low pitch tone, and a “LOW
    BATT” icon will appear in the display. When the BH-1 battery
    voltage becomes low, recharge the battery as soon as possible
    in the CAB-1 Bluetooth® Head Set Charger Sleeve.
    Note: The BH-1 is automatically turned off when it is inserted into the CAB-1 charger.
    If the BH-1 is inserted correctly, the LED indicator will glow Red. A fully discharged
    battery will be charged completely in 3 hours. When charging is finished, the LED indicator will glow blue.
    The BH-1’s approximate battery life is as follows:
    Operating Band

    Battery Life (Approx.)

    AM/FM Broadcast,
    External Audio Input
    Amateur Band
    1:1:8 (TX:RX:Standby)

    Battery Saver ON: 10 hours
    Battery Saver OFF: 3 hours

    3 hours

    Battery Saver
    If there has been no signal or key activity for 20 seconds, the Battery Save automatically
    puts the BH-1 to “sleep”, to conserve battery life.
    When a signal is received or the PTT key is pressed the BH-1 will be active again.
    You may enable the BH-1 battery saver feature via Menu Item “F7 BLU SAVE” (See page
    93).

    FTM-10R OPERATING MANUAL

    61



  • Page 64

    AF DUAL FUNCTION
    The AF Dual function allows you to monitor your desired amateur band frequency while
    listening to an AM broadcast station.
    You may monitor the FM broadcast station or external line input instead of an AM broadcast station by changing Menu Item “F2 AF DUAL” (The factory default is AM broadcast
    receiving).
    1. Set the FTM-10R to the desired amateur band frequency while in VFO or Memory
    channel.
    2. Press and hold the [VOL/SEL] key for one second to activate the Menu Mode.
    3. Rotate the DIAL knob to select Menu Item “F2 AF DUAL”.
    4. Press the
    key to enable selection of this Menu item.
    5. Rotate the DIAL knob to select the band and mode you want
    to listen to:
    AM AUTO: You may monitor an amateur band frequency
    while listening to an AM Broadcast station. A
    signal received on the amateur frequency will
    be output to the speaker. When the amateur band
    signal drops, AF Dual function is resumed (The AM Broadcast audio is
    heard while the amateur band frequency is being monitored).
    AM HOLD: You may monitor an amateur band frequency while listening to the AM
    Broadcast band. When a signal is received on the amateur band the audio
    will be output to the speaker. When the amateur band signal drops the
    FTM-10R remains in the amateur band continuously, and will not revert to
    AF Dual function.
    FM AUTO: You may monitor an amateur band frequency while listening to an FM Broadcast station. A signal received on the amateur frequency will be output to
    the speaker. When the amateur band signal drops, AF Dual function is resumed (The AM Broadcast audio is heard while the amateur band frequency
    is being monitored).
    FM HOLD: You may monitor an amateur band frequency while listening to the FM Broadcast band. When a signal is received on the amateur band, the audio will be
    output to the speaker. When the amateur band signal drops, the FTM-10R
    will remain in the amateur band continuously, and will not revert to AF Dual
    function.
    LI AUTO: You may monitor an amateur band frequency while listening to the line
    audio. A signal received on the amateur frequency will be output to the
    speaker. When the amateur band signal drops, AF Dual function is resumed
    (The line audio is heard while the amateur band frequency is being monitored).

    62

    FTM-10R OPERATING MANUAL



  • Page 65

    AF DUAL FUNCTION
    LI HOLD:

    You may monitor an amateur band frequency while listening to the line
    audio. When a signal is received on the amateur band, the audio will be
    output to the speaker. When the amateur band signal drops, the FTM-10R
    will remain in the amateur band continuously, and will not revert to AF Dual
    function.

    6. Press and hold the
    key for one second to activate the AF Dual function.
    The frequency selected by the VFO or memory in step one, will be heard with the AM
    or FM station from the speaker.
    7. Rotate the DIAL knob to select the desired Broadcast station.
    You may switch the Broadcast Band frequency control between the VFO and Memory
    channel by pressing the
    key.
    When a signal is received in the amateur band, the amateur signal is heard instead of the
    Broadcast band or line audio. When the amateur band signal drops, the AF Dual function is resumed. (The amateur band frequency is monitored while receiving the Broadcast station or the line in audio)
    You may transmit on the frequency, which is set on step1 by pressing the PTT key even
    if the AF Dual function is activated.
    To disable the AF Dual function, press the front panel
    keys.

    FTM-10R OPERATING MANUAL

    /

    63



  • Page 66

    CTCSS OPERATION
    Many repeater systems require that a very-low-frequency audio tone be superimposed on
    your FM carrier in order to activate the repeater. This helps prevent false activation of the
    repeater by radar or spurious signals from other transmitters. This tone system, called
    “CTCSS” (Continuous Tone Coded Squelch System), is included in your FTM-10R, and is
    very easy to activate.
    CTCSS setup involves setting the Tone Mode and then setting of the Tone Frequency.
    These actions are set up using Menu Items “F40 SQL TYPE” and “F39 SQL TSQF”.
    Press and hold the [VOL/SEL] key for one second to activate the Menu Mode.
    Rotate the DIAL knob to select Menu Item “F40 SQL TYPE”.
    key to enable selection of this Menu Item.
    Press the
    Rotate the DIAL knob so that “TONE SQL” appears on the
    display. This means that the Tone Squelch system is active,
    which mutes your FTM-10R’s receiver until it receives a
    call from another radio sending out a matching CTCSS tone.
    This can help keep your radio quiet until a specific call is
    received, which may be helpful while operating in congested areas.
    Note: 1) You may notice a “REV TONE” indication on the display while you rotate the
    DIAL knob in this step. This means that the Reverse Tone Squelch system is
    active, which mutes your FTM-10R’s receiver (instead of opening the squelch)
    when it receives a call from the radio sending a matched CTCSS tone. The
    “T SQ” icon will blink on the display when the Reverse Tone Squelch system
    is activated.
    Note: 2) You may notice a “DCS” indication on the display while you rotate the DIAL
    knob still more. We’ll discuss the Digital Code Squelch system shortly.
    5. When you have made your selection of the CTCSS tone mode, press the
    key momentarily, then rotate the DIAL knob three clicks counter-clockwise to select Menu
    Item “F39 SQL TSQF”. This Menu selection allows setting
    of the CTCSS tone frequency to be used.
    6. Press the
    key to enable adjustment of the CTCSS frequency.
    7. Rotate the DIAL knob until the display indicates the Tone Frequency you need to use.
    8. Press the [VOL/SEL] key to save the new setting and exit to normal operation.
    Note: Your repeater may or may not re-transmit a CTCSS tone. Some systems just use
    CTCSS to control access to the repeater, but don’t pass it along when transmitting. If the SMeter deflects, but the FTM-10R is not passing audio, repeat steps “1” through “4” above,
    but rotate the DIAL knob
    CTCSS TONE FREQUENCY (Hz)
    so that “TONE” appears.
    67.0 79.7 94.8 110.9 131.8 156.7 171.3 186.2 203.5 229.1
    This will allow you to hear
    69.3 82.5 97.4 114.8 136.5 159.8 173.8 189.9 206.5 233.6
    all traffic on the channel
    71.9 85.4 100.0 118.8 141.3 162.2 177.3 192.8 210.7 241.8
    being received.
    74.4 88.5 103.5 123.0 146.2 165.5 179.9 196.6 218.1 250.3
    1.
    2.
    3.
    4.

    77.0

    64

    91.5 107.2 127.3 151.4 167.9 183.5 199.5 225.7 254.1

    FTM-10R OPERATING MANUAL



  • Page 67

    DCS OPERATION
    Another form of tone access control is Digital Code Squelch, or DCS. It is a newer, more
    advanced tone system that generally provides more immunity from false paging than does
    CTCSS. The DCS Encoder/Decoder is built into your FTM-10R, and operation is very
    similar to that just described for CTCSS. Your repeater system may be configured for DCS.
    If not, it is frequently quite useful in Simplex operation if your friend(s) use transceivers
    equipped with this advanced feature.
    Note: Just as in CTCSS operation, DCS requires that you set the Tone Mode to DCS and
    that you select a DCS Code.
    1.
    2.
    3.
    4.

    5.

    6.
    7.
    8.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F40 SQL TYPE”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob so that “DCS” appears on the display. This means that the DCS Encoder/Decoder is active,
    which mutes your FTM-10R’s receiver until it receives a
    call from another radio sending out a matching DCS tone.
    When you have made your selection of the DCS mode, press
    the
    key momentarily, then rotate the DIAL knob two
    clicks counter-clockwise to select Menu Item “F36 SQL
    DCS”. This Menu selection allows setting of the DCS code
    to be used.
    Press the
    key to enable adjustment of the DCS code.
    Rotate the DIAL knob until the display indicates the DCS
    code (three-digits number) you need to be using.
    Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    Note: Remember that DCS is an Encode/Decode system, so your receiver will remain muted
    until a matching DCS code is received on an incoming transmission. Switch the
    DCS off when you’re just tuning around the band!

    023
    025
    026
    031
    032
    036
    043

    047
    051
    053
    054
    065
    071
    072

    073
    074
    114
    115
    116
    122
    125

    131
    132
    134
    143
    145
    152
    155

    156
    162
    165
    172
    174
    205
    212

    223
    225
    226
    243
    244
    245
    246

    FTM-10R OPERATING MANUAL

    DCS CODE
    251 271 332
    252 274 343
    255 306 346
    261 311 351
    263 315 356
    265 325 364
    266 331 365

    371
    411
    412
    413
    423
    431
    432

    445
    446
    452
    454
    455
    462
    464

    465
    466
    503
    506
    516
    523
    526

    532
    546
    565
    606
    612
    624
    627

    631
    632
    654
    662
    664
    703
    712

    723
    731
    732
    734
    743
    754
    -

    65



  • Page 68

    EPCS (ENHANCED PAGING & CODE SQUELCH) OPERATION
    The FTM-10R includes an Enhanced CTCSS tone encoder/decoder and a dedicated microprocessor providing paging and selective calling features. This allows you to place a call to
    a specific station (Paging), and to receive calls of your choice directed only to you (Code
    Squelch).
    The paging and code squelch systems use two pairs of (alternately switched) CTCSS tones,
    which are stored in the pager memories. Basically, your receiver remains silent until it
    receives the CTCSS tone pair that matches those stored in the Receiving Pager Memory.
    The squelch then opens so the caller is heard, and the paging ringer immediately sounds, if
    activated. When you close the PTT key to transmit, the CTCSS tone pair that is stored in
    the Transmitting Pager Memory will be transmitted automatically.
    On the paged radio, the squelch will close automatically after the incoming page ends.

    STORING THE CTCSS TONE PAIRS FOR EPCS OPERATION
    1.
    2.
    3.
    4.
    5.

    6.

    7.
    8.
    9.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F21 PAGER”.
    Press the
    key to enable selection of this Menu Item.
    Press and hold the
    key for one second to display the
    current Receiving CTCSS Tone Pair.
    Rotate the DIAL knob to set the CTCSS Tone number that
    corresponds to the first tone of the Receiving CTCSS Tone
    Pair.
    Press the
    key, then rotate the DIAL knob to set the
    CTCSS Tone number that corresponds to the second tone
    of the Receiving CTCSS Tone Pair.
    Repeat step 6 for setting the Transmitting CTCSS Tone Pair.
    If you make a mistake, press the
    key to move the cursor back one space, then re-select the correct number.
    When you have made your selection of both Receiving and
    Transmitting CTCSS tone pairs, press the [VOL/SEL] key
    to save the new setting and exit to normal operation.

    Note: The FTM-10R does not recognize the order of the 1st tone and the 2nd tone. In other
    words, for example, the FTM-10R considers both CTCSS pairs “10, 35” and “35,
    10” to be identical.

    66

    FTM-10R OPERATING MANUAL



  • Page 69

    EPCS (ENHANCED PAGING & CODE SQUELCH) OPERATION
    ACTIVATING THE EPCS
    1.
    2.
    3.
    4.
    5.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F21 PAGER”.
    key to enable selection of this Menu Item.
    Press the
    Rotate the DIAL knob to change the display to “ON”.
    Press the [VOL/SEL] key momentarily to save the new
    setting and exit to normal operation.

    To disable the EPCS, just repeat the above procedure, rotating
    the DIAL knob to select “OFF” in step 4 above.
    When the EPCS is activated, the “T” icon will blink during operation.

    FTM-10R OPERATING MANUAL

    67



  • Page 70

    INTERNET CONNECTION FEATURE (WiRES

    TM

    )

    The FTM-10R can be used to access a “node” (repeater or base station), which is tied into
    the Vertex Standard WiRESTM (Wide-Coverage Internet Repeater Enhancement System)
    network. Details may be found at the WiRES-II Web site: http://www.vxstd.com/en/
    wiresinfo-en/. This feature may also be used to access other systems, as described below.

    SRG (“SISTER RADIO GROUP”) MODE
    1.
    2.
    3.
    4.

    5.

    6.
    7.

    8.
    9.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F48 WIRES”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob until “CODE” appears on the display.
    This activates WiRESTM in SRG mode. The “ ” icon will
    appear on the display.
    Press and hold the
    key for one second. Then rotate the
    DIAL knob while to select the access number (“CODE 0” ~
    “CODE 9”, “CODE A”, “CODE B”, “CODE C”, “CODE D”,
    “CODE E (*)”, “CODE F (#))” corresponding to the WiRESTM
    node to which you wish to establish the WiRESTM connection. (ask the node or repeater owner/operator if you don’t
    know the access number in the network).
    Press the [VOL/SEL] key to save the new setting and exit to normal operation.
    With the Internet Connection feature activated (as in step 4 above), the FTM-10R will
    generate a brief (0.1 second) DTMF tone according to your selection in step 5. This
    DTMF tone is sent at the beginning of every transmission to establish or maintain the
    link to the local WiRESTM node operating in the SRG mode.
    To return to the FRG mode, repeat steps 1 - 4 above, selecting “MEM” in step 4, then
    press the [VOL/SEL] key to save the new setting and exit to normal operation.
    To disable the Internet Connection feature, just repeat the above procedure, rotating the
    DIAL knob to select “OFF” in step 4 above, then press the [VOL/SEL] key to save the
    new setting and exit to normal operation (the “ ” icon will disappear from the display).

    Note: If other users report that you always have a DTMF “beep” at the beginning of each
    transmission, and you are not operating in conjunction with Internet access, disable
    this function via step (4) above.

    68

    FTM-10R OPERATING MANUAL



  • Page 71

    INTERNET CONNECTION FEATURE (WiRES

    TM

    )

    FRG (“FRIENDLY RADIO GROUP”) MODE
    You may access other Internet Link Systems (including WiRESTM in the “FRG” mode) that
    use a DTMF string for access.

    Programming the FRG code
    Load the DTMF tones that you wish to use for Internet-link access into a DTMF memory
    register. For purposes of this example, we will use “#(F)1101D” as the access code (the “#”
    key is denoted by the letter “F”).
    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F13 DTMF”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to select the DTMF memory register
    (D1 ~ D9) into which you wish to store the access code.
    5. Press and hold the
    key for one second. The first digit
    will blink.
    6. Rotate the DIAL knob to select “F” (representing DTMF
    “#” the first digit of the DTMF string).
    “E” representing DTMF “*” and “F” representing DTMF
    “#”
    7. Press the
    key momentarily to accept the first digit and
    move to the second digit of the DTMF string.
    8. Repeat the previous steps until you have completed the access code (“# (F)1101D”).
    9. If you make a mistake, press the
    key to backspace the cursor, then re-enter the
    correct number.
    10. Press and hold the
    key for one second to save the new setting.
    11. Repeat steps 1 through 10 to store other access codes, if so desired.
    12. Press the [VOL/SEL] key to save the setting and exit to normal operation.
    1.
    2.
    3.
    4.

    FTM-10R OPERATING MANUAL

    69



  • Page 72

    INTERNET CONNECTION FEATURE (WiRES

    TM

    )

    To accessing an FRG Node
    1.
    2.
    3.
    4.

    5.

    6.
    7.

    8.

    70

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F48 WIRES”.
    key to enable selection of this Menu Item.
    Press the
    Rotate the DIAL knob until “MEM” appears on the display.
    This activates WiRESTM in FRG mode. The “ ” icon will
    appear on the display.
    Press and hold the
    key for one second, then rotate the
    DIAL knob to select the Internet Memory register number
    (D1 ~ D9) corresponding to the Internet link repeater to
    which you wish to establish an Internet link.
    Press the [VOL/SEL] key to save the new setting and exit
    to normal operation.
    Once the Internet Connection feature is activated per step 4
    above, you may now press the
    key, while you are transmitting, to send out the
    selected DTMF string (to establish the link to the desired Internet-link node).
    To disable the Internet Connection feature, repeat steps 1 - 4 above, selecting “OFF” in
    step 4, then press the [VOL/SEL] key to save the new setting and exit to normal operation (the “ ” icon will disappear from the display).

    FTM-10R OPERATING MANUAL



  • Page 73

    DTMF AUTODIALER
    Nine Autodialer memories are available on the FTM-10R. These DTMF Autodialer memories can store up to 16 digits of a telephone number for repeater autopatch or other use.

    To load the DTMF Autodialer memories:
    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F13 DTMF”.
    Press the
    key to enable selection of this Menu item.
    Rotate the DIAL knob to select the DTMF AutoDial memory
    channel number into which you wish to store a telephone
    number (“D1” to “D9”). The previously stored telephone
    number is displayed on the LCD.
    5. Press and hold the
    key for one second.
    Press the PTT key to clear any previously stored telephone
    number, if desired.
    6. Rotate the DIAL knob to select the first digit of the telekey
    phone number you wish to store. Then press the
    momentarily to save the first digit of the telephone number
    and move on to the next digit.
    “E” representing DTMF “*” and “F” representing DTMF
    “#”
    7. Repeat previous step for each digit in the telephone number. If you make a mistake,
    press the
    key to move the cursor back to the previous digit, then re-enter the correct
    number.
    Press the PTT key to delete all data after the cursor that may have been previously
    stored erroneously.
    8. When entries of all digits are complete, press and hold the
    key for one second.
    9. If you wish to store another DTMF string, repeat steps 4 through 8 above.
    10. Press the [VOL/SEL] key momentarily to save the new setting and exit to normal operation.
    1.
    2.
    3.
    4.

    FTM-10R OPERATING MANUAL

    71



  • Page 74

    DTMF AUTODIALER
    To transmit the memorized telephone number:
    1. Press the PTT key, then press and hold the
    key while transmitting.
    The “DT MEM” indication will appear in the display for a
    moment (thus enabling the DTMF AutoDial), and “ ” icon
    will appear in the display.
    2. Press the
    key while maintaining a transmission.
    3. Rotate the DIAL knob to select the DTMF AutoDial memory channel number you wish
    to transmit (“D1” to “D9”) while maintaining a transmission.
    4. Press the
    key again while maintaining a transmission.
    P The telephone number is transmitted.
    P If you use the optional DTMF hand Microphone “MH-68A6J”, you may send the
    telephone number using the following steps:
    1. First press the PTT key, then press the microphone’s numeric keys ([1] through
    [9]) corresponding to the DTMF memory string you wish to send.
    2. Once the string begins, you may release the PTT key, as the transmitter will be
    held “on the air” until the DTMF string is completed.
    P The transmitter will hold for 1.5 seconds after completion of the DTMF Memory
    string.
    When the transmission is completed, press and hold the
    key while transmitting to eliminate the “ ” icon.

    72

    FTM-10R OPERATING MANUAL



  • Page 75

    REPEATER OPERATION
    The FTM-10R includes a host of convenient features that makes operation on amateur
    repeaters both efficient and enjoyable.
    The FTM-10R offers three methods of setting up split-frequency operation on repeaters:
    Manual selection of preset repeater shifts (Standard Repeater Shift);
    Automatic Repeater Shift (ARS), providing automatic activation of repeater shifts while
    operating within designated repeater frequency subbands.
    Independently stored transmit and receive frequencies (typically not corresponding to established repeater frequency shifts).

    Standard Repeater Shift
    To activate the standard shift manually, you may use the Menu mode:
    1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    2. Rotate the DIAL knob to select Menu Item “F25 RPT
    MODE”.
    3. Press the
    key to enable selection of this Menu Item.
    4. Rotate the DIAL knob to select desired shift direction
    (RPTR-, RPTR+, or RPTR OFF).
    5. Press the [VOL/SEL] key momentarily to save the new setting and exit to normal operation.
    Your FTM-10R has been configured, at the factory, for the repeater offset customary in
    your country. For the 144 MHz band offset will be 600 kHz; on the 430 MHz band, the
    offset may be 1.6 MHz, 7.6 MHz, or 5 MHz (USA version). You can change the offset using
    the following procedure, if needed for vacation travel or other purposes:
    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F26 RPT SFT”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to set the desired offset. Note that
    the resolution of the “Standard” repeater shift is to the nearest 50 kHz multiple.
    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    1.
    2.
    3.
    4.

    Note: Do not use this procedure for programming of an “odd split” type repeater pair! The
    process for programming odd splits is shown on page 42.

    FTM-10R OPERATING MANUAL

    73



  • Page 76

    REPEATER OPERATION/BAND EXPANSION
    Automatic Repeater Shift
    The ARS (Automatic Repeater Shift) feature in this transceiver allows easy and convenient
    repeater operation by automatically activating the repeater shift function whenever you
    tune to a frequency in a standard repeater sub band. The ARS function is preset at the
    factory to conform to the standards for the country to which it is exported.
    The ARS function is enabled at the factory. To disable ARS:
    1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    2. Rotate the DIAL knob to select Menu Item “F24 RPT ARS”.
    key to enable selection of this Menu Item.
    3. Press the
    4. Rotate the DIAL knob to change the display to “OFF”.
    5. Press the [VOL/SEL] key to save the new setting and exit
    to normal operation.
    To enable the ARS function again, just repeat the above procedure, rotating the DIAL knob
    to select “ON” in step 4 above.

    BAND EXPANSION
    The FTM-10R can receive the following frequency bands via the Menu Item.
    AIR: 108 - 137 MHz and 300 - 336 MHz
    GR1: 174 - 222 MHz and 470 - 800 MHz
    GR2: 336 - 420 MHz and 800 - 999.9875 MHz (cellular blocked)
    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F27 RX EXP”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to change the setting to “EXPAND”.
    Press the [VOL/SEL] key to save your new setting and resume normal operation.
    When the band is expanded, you can see the “AIR”, “GR1”,
    and “GR2” additional frequency bands between the “WX Band”
    and “Audio Line”.

    1.
    2.
    3.
    4.
    5.

    74

    FTM-10R OPERATING MANUAL



  • Page 77

    WEATHER BROADCAST CHANNEL OPERATION
    The VHF Weather Broadcast Station Memory Channel Bank has been pre-programmed at
    the factory, for quick selection of NOAA weather information stations.
    1. Press the front panel
    /
    key to recall the Weather Broadcast Station Memory
    Bank (“WX” notation will appear at the upper left corner in the display for a moment).
    2. Rotate the DIAL knob to select the desired CH FREQUENCY CH FREQUENCY
    1
    162.550 MHz 6
    162.500 MHz
    Weather Broadcast channel.
    2
    162.400 MHz 7
    162.525 MHz
    3. If you wish to scan this bank to search for louder 3 162.475 MHz 8 161.650 MHz
    stations, just press the PTT key. When the scan- 4 162.425 MHz 9 161.775 MHz
    ner pauses on a station, press the PTT key once 5 162.450 MHz 10 163.275 MHz
    to halt the can, or press it twice to restart the scan.
    4. To exit from the Weather Broadcast Station Memory mode, press the front panel
    /
    keys to select the desired operating band.

    Severe Weather Alert
    In the event of extreme weather disturbances, such as storms and hurricanes, the NOAA
    (National Oceanic and Atmospheric Administration) sends a weather alert accompanied by
    a 1050 Hz tone and subsequent weather report on one of the NOAA weather channels.

    FTM-10R OPERATING MANUAL

    75



  • Page 78

    MISCELLANEOUS SETTING
    CHANNEL STEP SELECTION
    Tuning steps are factory preset to default increments which are appropriate for the country
    to which this radio is exported. You may have a reason to use a different step size, however,
    and here is the procedure for changing the channel steps:
    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F41 STEP”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to select the desired step size:
    5.00, 6.25. 8.33, 10.00, 12.50, 15.00, 20.00, 25.00, 50.00, 100.00, 200.00 kHz or AUTO.
    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.
    Note: 1) AM BC band only selects 9 kHz or 10 kHz.
    Note: 2) FM BC band only selects 50 kHz, 100 kHz, or 200 kHz.
    Note: 3) Steps of 5 kHz, 6.25 kHz, 8.33kHz, and 9 kHz are not available above 470
    MHz.

    1.
    2.
    3.
    4.

    CHANGING THE OPERATING MODE
    The FTM-10R provides for automatic mode changing when the radio is tuned to different
    operating frequencies. However, should an unusual operating situation arise in which you
    need to change between the available operating modes (FM, FM-Narrow, FM-Wide, and
    AM), here is the procedure for doing so:
    1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    2. Rotate the DIAL knob to select Menu Item “F29 RX M MOD”.
    3. Press the
    key to enable selection of the operating mode. The current operating mode
    appears on the LCD.
    4. Rotate the DIAL knob to select the desired operating mode.
    AUTO:
    Automatic mode setting per default values for the selected frequency range.
    WIDE FM: Frequency Modulation for receiving an FM Broadcast Station.
    FM:
    Frequency Modulation for receiving an Amateur Radio Station and most
    VHF/UHF Communication.
    NARR FM: Frequency Modulation for receiving some Amateur Radio Stations and VHF/
    UHF Communication.
    AM:
    Amplitude Modulation for receiving a AM Radio Station and Air Band Communication.
    Press the [VOL/SEL] key to save the new setting and resume normal operation.

    76

    FTM-10R OPERATING MANUAL



  • Page 79

    MISCELLANEOUS SETTING
    PTT KEY FUNCTION
    You can change the operation of the PTT key if desired.
    1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    2. Rotate the DIAL knob to select Menu Item “F23 PTT MODE”.
    3. Press the
    key to enable selection of the PTT key function. The current PTT key
    function appears on the LCD.
    4. Rotate the DIAL knob to select the desired PTT key function.
    MOMENT: Press and hold the PTT key, to activate the transmitter. Release the PTT key,
    to return to receive.
    TOGGLE: Briefly press the PTT key to activate the transmitter. Briefly, press the PTT
    key once again, to return to receive.
    5. Press the [VOL/SEL] key to save the new setting and resume normal operation.

    KEY BEEPER
    A key beeper provides useful audible feedback whenever a key is pressed.
    Follow this procedure to turn the beeper on or off:
    1.
    2.
    3.
    4.
    5.
    6.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F6 BEEP”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to change the setting to “OFF”.
    Press the [VOL/SEL] key to save the new setting and exit to normal operation.
    To turn the beep back on again, select “KEY” or “KEY+SC (factory default)” in step 4
    above.
    KEY:
    The beeper sounds when you press the key.
    KEY+SC: The beeper sounds when you press the key, or when the scanner stops.

    SMART KEY SELECT
    You may assign/exclude the functions which recall with the top panels’

    /

    key.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F15 FKEY SEL”.
    key to enable selection of this Menu Item.
    Press the
    Rotate the DIAL knob to select the function you wish to assign or exclude.
    Press and hold the
    key for one second to toggle the function on (assign) and off
    (exclude).
    6. Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    1.
    2.
    3.
    4.
    5.

    FTM-10R OPERATING MANUAL

    77



  • Page 80

    MISCELLANEOUS SETTING
    REPEATER SHIFT DIRECTION
    You may select the Repeater Shift Direction.
    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F25 RPT MODE”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to select desired shift direction (RPTR-, RPTR+, or RPTR OFF).
    Press the [VOL/SEL] key momentarily to save the new setting and exit to normal operation.
    The repeater offset is fixed to 600 kHz on the 144 MHz band and 5 MHz on the 430 MHz
    band from the factory. You can change the offset via the Menu mode “F26 RPT SFT”.
    1.
    2.
    3.
    4.
    5.

    REPEATER SHIFT OFFSET
    1.
    2.
    3.
    4.
    5.
    6.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F26 RPT SFT”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to select desired offset.
    Available selections are 0.00 - 99.95 MHz (50 kHz increments).
    Press the [VOL/SEL] key momentarily to save the new setting and exit to normal operation.

    AUTOMATIC REPEATER SHIFT
    The ARS (Automatic Repeater Shift) feature in this transceiver allows easy and convenient
    repeater operation by automatically activating the repeater shift function whenever you
    tune to a frequency in a standard repeater sub band. The ARS function is preset at the
    factory to conform to the standards for the country to which it is exported.
    The ARS function is enabled at the factory. To disable ARS:
    1.
    2.
    3.
    4.
    5.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F24 RPT ARS”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to change the display to “OFF”.
    Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    To enable the ARS function again, just repeat the above procedure, rotating the DIAL knob
    to select “ON” in step 4 above.

    78

    FTM-10R OPERATING MANUAL



  • Page 81

    MISCELLANEOUS SETTING
    PROGRAMMING THE KEY ASSIGNMENTS
    In the factory default, the optional MH-68A6J/MH-68B6J Microphone’s [PGM] key functions have been assigned to the “WX CH”. This may be changed by the user if you wish to
    assign quick access to another function.
    To change the assignments for the MH-68A6J/MH-68B6J Microphone’s [PGM] key:
    1.
    2.
    3.
    4.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F20 MIC PRGM”.
    Press the
    key to enable selection of this Menu item.
    Rotate the DIAL knob to select the function you wish to assign to the [PGM] key. The
    available choices are:
    MONI:
    T CALL:
    SSCH:
    ARTS:
    TAG:
    MHz:
    SCAN:
    CLUB:
    WX:
    SQLLVL:
    TX LOW:
    RPTR:
    SQL TYP:
    REV:
    TSQLF:
    DCODE:

    Disable the noise and tone squelch systems.
    Activates 1750 Hz Tone Burst
    Engages the Smart Search operation.
    Engages the ARTSTM operation.
    Switches the display between indication of the frequency or the channel’s
    Alpha/Numeric label while receiving on the memory channel.
    Allows 1-MHz tuning steps while receiving in VFO mode.
    Engages the Scan operation.
    Recall the CLUB channel.
    Switches operation to the Weather Channel bank.
    Selects the Squelch Threshold Level
    Selects the Transmitter Power Level.
    Sets the Repeater Shift Direction.
    Selects the CTCSS/DSC Operation.
    Reverses the Transmit and receive frequency during split-frequency operation.
    Selects the CTCSS frequency.
    Selects the DCS code.

    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    FTM-10R OPERATING MANUAL

    79



  • Page 82

    MISCELLANEOUS SETTING
    SCANNING BAND
    By default, the FTM-10R considers the 144 MHz Amateur Band and 430 MHz Amateur
    Band to be independent bands while the scanner is activated. You may change scanner
    operation so that both the 144 MHz Amateur Band and the 430 MHz Amateur Band are
    scanned as one band.
    1.
    2.
    3.
    4.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F30 SCN CVRG”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to select the desire mode.
    The FTM-10R considers the 144 MHz Amateur Band and 430 MHz Amateur Band to be an independent band and scans these when the scan mode
    is engaged. Activate the scanner on the 144 MHz Amateur Band only (or
    430 MHz Amateur Band only).
    HAM BAND: The FTM-10R considers the 144 MHz Amateur Band and 430 MHz Amateur Band to be one band and scans it when the scan mode is engaged.
    Activate the scanner across the 144 MHz Amateur Band and 430 MHz
    Amateur Band.
    IN BAND:

    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    SCAN-RESUME MODE
    Three scan-resume modes are available on the FTM-10R:
    In this mode, the scanner will remain halted for as long as there is carrier present on the channel. After the carrier drops at the end of the other
    station's transmission, scanning will resume.
    HOLD:
    In this mode, the scanner will halt on a signal it encounters. It will not
    restart automatically; you must manually re-initiate scanning if you wish
    to resume.
    TIME 3S/5S/10S: In these modes, the scanner will halt for the selected resume time, after
    which scanning will resume (whether or not the other station is still
    transmitting).

    BUSY:

    The default scan-stop mode is “BUSY”. To change the scan-resume mode, use the following procedure:
    1.
    2.
    3.
    4.
    5.

    80

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F32 SCN MODE”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to set the desired scan-resume mode.
    Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    FTM-10R OPERATING MANUAL



  • Page 83

    MISCELLANEOUS SETTING
    SCAN DIRECTION
    By default, the VFO frequency will jump to the low band edge of the current band when the
    VFO frequency reaches the high band edge. You may change the scanner operation so that
    the VFO frequency will change to downward scanning when the VFO frequency reaches
    the high band edge.
    1.
    2.
    3.
    4.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F31 SCN DRCT”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to set the desired scan mode.
    NORMAL:When the VFO frequency reaches the high band edge of the current band, the
    VFO frequency will jump to the low band edge of the current band (or vice
    versa).
    RETURN: When the VFO frequency reaches the high band edge of the current band
    while scanning upward, the scanner will reverse direction and scan downwards. (or vice versa).

    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    SCAN START DIRECTION
    By default, the scanner initiates scanning upward when activates the scanner by pressing
    the top panels’
    key. You may change the scan start direction to downward scanning.
    1.
    2.
    3.
    4.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F33 SCN STRT”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to set the desired direction.
    UP START:
    the scanner initiates scanning upward.
    DWN.TRART: the scanner initiates scanning downward.

    Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    FTM-10R OPERATING MANUAL

    81



  • Page 84

    MISCELLANEOUS SETTING
    SPLIT TONE OPERATION
    The FTM-10R can be operated in a “Split Tone” configuration, to enable operation on
    repeaters using a mix of both CTCSS and DCS control.
    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F37 SQL.EXP”.
    Press the
    key to enable selection of this Menu item.
    Rotate the DIAL knob to set this Menu item to “ON” (to enable the Split Tone feature)
    Press the [VOL/SEL] key momentarily to save the new setting and exit to normal operation.
    When the Split Tone feature is activated, you can see the following additional parameters
    following the “DCS” parameter (while selecting the tone mode via Menu item “F40 SQL
    TYPE”):

    1.
    2.
    3.
    4.
    5.

    DCS ENC: DCS Encode only (the “DCS” icon will blink during operation).
    TONE DCS: Encodes a CTCSS Tone and Decodes a DCS code (the “T” icon will blink and
    the “DCS” icon will appear during operation).
    DCS TSQL: Encodes a DCS code and Decodes a CTCSS Tone (the “TSQ” icon will appear
    and the “DCS” icon will blink during operation)

    CTCSS/DCS/EPCS BELL OPERATION
    During CTCSS Decode, DCS, or EPCS operation, you may set up the FTM-10R so that a
    ringing “bell” sound alerts you when a call is coming in.
    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F35 SQL BELL”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to set the desired number of rings of the Bell. The available
    choices are 1, 3, 5, or 8 rings, CONT (continuous ringing), or OFF.
    5. Press the [VOL/SEL] key momentarily to save the new setting and exit to normal operation.
    When you are called by a station whose transceiver is sending a CTCSS tone, DCS code, or
    CTCSS code pair which matches that set into your Decoder, the Bell will ring in accordance with this programming.

    1.
    2.
    3.
    4.

    82

    FTM-10R OPERATING MANUAL



  • Page 85

    MISCELLANEOUS SETTING
    BATTERY VOLTAGE DISPLAY
    You can display the vehicle's battery voltage on the display at any time.
    1.
    2.
    3.
    4.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F11 DC VOLT”.
    Press the
    key to display the vehicle’s battery voltage on the display.
    [
    Press the VOL/SEL] key to exit Battery Voltage mode and return to normal operation.

    TEMPERATURE DISPLAY
    You can show the temperature inside the front panel on the display.
    1. Press the [VOL/SEL] key repeatedly to display the Clock, Stop Watch Timer, or Thermometer.
    The display returns to the frequency display automatically if you leave an interval of
    three seconds without entering the next operation. Please enter the next step within the
    3 second interval.
    2. Rotate the DIAL knob to display the temperature (TMP XX °C)
    The display automatically returns to the frequency display in approximately three seconds.
    You may change the status that the DIAL knob does not return automatically to the
    Frequency. See the explanation of the Menu Item “F5 AF-VFO”.

    CLOCK FORMAT
    You may select the Clock Format via the Menu mode. Available selections are “HH:MM:SS”,
    “HH:MM”, and “MM:SS”.
    1. Press the [VOL/SEL] key repeatedly to display the Clock, Stop Watch Timer, or Thermometer.
    The display returns to the frequency display automatically if you leave an interval of
    approximately three seconds before the next operation. Please operate the next step
    within the 3 second interval.
    2. Press and hold the [VOL/SEL] key for one second.
    3. Rotate the DIAL knob to select the Menu Item “T3 T FORMAT”.
    4. Press the
    key momentarily. Then rotate the DIAL knob to select the desired Clock
    Format.
    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    FTM-10R OPERATING MANUAL

    83



  • Page 86

    MISCELLANEOUS SETTING
    TIME SYSTEM
    You may select the Time System between “12H” and “24H” via the Menu mode.
    1. Press the [VOL/SEL] key repeatedly to display the Clock, Stop Watch Timer, or Thermometer.
    The display returns to the frequency display automatically if you leave an interval of
    approximately three seconds before the next operation. Please operate the next step
    within the 3 second interval.
    2. Press and hold the [VOL/SEL] key for one second.
    3. Rotate the DIAL knob to select the Menu Item “T4 12H/24H”.
    4. Press the
    key momentarily. Then rotate the DIAL knob to select the desired Time
    System.
    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    ALARM SET
    You may set an alarm beep which will sound every “00” minutes via the Menu mode.
    1. Press the [VOL/SEL] key repeatedly to display the Clock, Stop Watch Timer, or Thermometer.
    2. Press and hold the [VOL/SEL] key for one second.
    3. Rotate the DIAL knob to select the Menu Item “T2 CLOCK BP”.
    4. Press the
    key momentarily. Then rotate the DIAL knob to change the setting to
    “ON”.
    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.
    To turn the alarm off again, select “OFF” in step 4 above.

    INTERVAL BEEP
    The FTM-10R’s Stop Watch Timer allows programming a timed interval when a beep will
    sound and the white LED will flash.
    1. Press the [VOL/SEL] key repeatedly to recall the Clock/Timer mode.
    2. Press and hold the [VOL/SEL ] key for one second to activate the Clock/Timer
    Customization mode.
    3. Rotate the DIAL knob to select Menu Item “T5 TMR BEEP”.
    key momentarily to enable selection of this Menu Item.
    4. Press the
    5. Rotate the DIAL knob to select the desired interval. Available selections are “5MIN”
    through “60MIN” (5MIN increment) or “OFF”.
    6. Now, press the [VOL/SEL] key to save the new setting and exit to Clock/Timer mode.
    To disable the interval timer, just repeat the above procedure, rotating the DIAL knob to
    select “OFF” in step 5 above.

    84

    FTM-10R OPERATING MANUAL



  • Page 87

    MISCELLANEOUS SETTING
    AUTOMATIC POWER-OFF (APO)
    The “Automatic Power-Off” (APO) feature will turn the radio completely off after a userdefined period of PTT or key/button inactivity. If you do not press any front panel keys or
    buttons, rotate the DIAL knob, use the microphone’s keys and buttons, or transmit, and so
    long as the transceiver is not scanning or engaged in priority monitoring, the radio will shut
    itself off after the specified time period.
    The FTM-10R can operate the Automatic Power-Off feature through the Clock/Timer function.
    The available selections for the time before power-off are 0.5 - 12.0 hours (0.5 hour increments), as well as APO Off. This feature is useful in minimizing battery drain in a mobile
    installation if you forget to turn the transceiver off when you leave your vehicle.
    To activate the APO feature:
    1. Press the [VOL/SEL] key repeatedly to display the Clock, Stop Watch Timer, or Thermometer.
    2. Press and hold the [VOL/SEL] key for one second.
    3. Rotate the DIAL knob to select Menu Item “T6 APO”.
    4. Press the
    key to enable selection of this Menu Item.
    5. Rotate the DIAL knob to select desired time, after which the radio will automatically
    shut down. Available selections are 0.5 to 12.0 hours (0.5 hour increments), or Off.
    6. Press the [VOL/SEL] key to save the new setting and exit to Clock/Timer mode.
    If there is no action by you within the time interval programmed, a ringer sounds 3 minutes
    before the APO shutdown time. Three minutes thereafter, the microprocessor will shut down
    the radio automatically.

    AUDIO PITCH CONTROL
    The FTM-10R includes a feature that lets you choose six special receiver audio responses
    to allow the most comfortable and effective reception in noisy environments. The effect is
    similar to that provided by a “Tone Control” in a stereo.
    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F3 AF PITCH”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to select the desired receiver audio response. Available selections
    are LOW-3, LOW-2, LOW-1, NORMAL, HIGH-1, and HIGH-2.
    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.
    1.
    2.
    3.
    4.

    FTM-10R OPERATING MANUAL

    85



  • Page 88

    MISCELLANEOUS SETTING
    VOLUME SETTING ALERT FEATURE
    The FTM-10R provides the Volume Setting Alert feature.
    1.
    2.
    3.
    4.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F4 AF PREST”.
    Press the
    key to enable selection of this Menu item.
    Rotate the DIAL knob to select the desired effect level.
    OV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL
    knob blinks orange when volume level is set to the ±3 steps of the preset
    level.
    LV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL
    knob blinks orange when volume level is set to the preset level minus 3
    steps.
    HV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL
    knob blinks orange when volume level is set to the preset level plus 3 steps
    above.
    OFF:
    Disable the Volume Setting Alert feature.

    5. Press and hold the
    key for one second, then rotate the DIAL knob to select the
    desired preset level.
    6. Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    SPEAKER SELECTION
    You may choose the speaker to be used.
    1.
    2.
    3.
    4.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F34 SPEAKER”.
    Press the
    key to enable selection of this Menu item.
    Rotate the DIAL knob to select the desired the speaker to be used.
    REAR: Outputs the receiving audio from the REAR speaker (located in the transceiver’s
    body).
    F+R: Outputs the receiving audio from both FRONT (located in the front panel) and
    REAR speakers.
    FRONT: Outputs the receiving audio from the FRONT (located in the front panel) speaker.
    OFF: Disable the FRONT and REAR Speakers.

    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.
    If you use the external speaker, this Menu Item is set to “REAR” or “F+R”.

    86

    FTM-10R OPERATING MANUAL



  • Page 89

    MISCELLANEOUS SETTING
    STEREO/MONAURAL SELECTION
    You may enjoy the FM Broadcast and external audio input in stereo output.
    1.
    2.
    3.
    4.
    5.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F42 STEREO”.
    Press the
    key to enable selection of this Menu item.
    Rotate the DIAL knob to select between “STEREO” and “MONO”.
    Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    When Stereo Audio Output is selected, an “

    ” icon appears on the display.

    MIC GAIN SETTING
    At the factory, a microphone gain has been programmed that should be satisfactory for the
    internal microphone and optional MH-68A6J/ MH-68B6J. If you us an after-market microphone, you may wish to set a different Microphone Gain Level.
    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F19 MIC GAIN”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to select the desired Microphone Gain Level. Available selections are MIN, LOW, NORMAL, HIGH, and MAX.
    5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.
    1.
    2.
    3.
    4.

    PTT LOCK
    You may also lock out the PTT key when the LOCK mode is activated.
    1.
    2.
    3.
    4.

    Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
    Rotate the DIAL knob to select Menu Item “F22 PTT LOCK”.
    Press the
    key to enable selection of this Menu Item.
    Rotate the DIAL knob to select “ON” (Lock) or “OFF” (unlock).

    Press the [VOL/SEL] key to save the new setting and exit to normal operation.

    FTM-10R OPERATING MANUAL

    87



  • Page 90

    MENU (“SET”) MODE
    The FTM-10R Menu Mode, already described in parts of many previous chapters, is easy
    to activate and set. It may be used for configuration of a wide variety of transceiver parameters, some of which have not been detailed previously. Use the following procedure to
    activate the Menu mode:
    Press and hold the [VOL/SEL] key for one second to enter the Menu mode.
    Rotate the DIAL knob to select the Menu Item to be adjusted.
    Press the
    key momentarily to enable adjustment of the Menu Item.
    Rotate the DIAL knob to adjust or select the parameter to be changed on the Menu Item
    selected in the above step.
    5. After completing your selection and adjustment, press the [VOL/SEL] key to save the
    new setting and exit to normal operation.
    1.
    2.
    3.
    4.

    Item
    #

    Menu Item

    Available Values
    (Default: Bold Itaric)

    Function

    1

    AF AUTO

    Enables/Disables the Automatic Audio Volume Controller.

    2

    AF DUAL

    Enables/Disables the AF DUAL operation.

    3

    AF PITCH

    Select the Tone Pitch control for the received audio.

    4

    AF PREST

    Enable/Disable the Volume Setting Alert feature.

    5
    6

    AF-VFO
    BEEP

    7

    BLU SAVE

    8

    BLU VOX

    9
    10
    11
    12
    13

    CLOCK
    CLUB PRI
    DC VOLT
    DIMMER
    DTMF

    14

    FKEY MOD

    Select the DIAL knob and display function.
    Enables/Disables the beeper.
    Enable/Disable the battery saver of the optional BH-1 Bluetooth®
    Headset.
    Enables/Disables the Bluetooth® function (requires the optional BU1 Bluetooth® Unit).
    Activates/Disables the Internal Clock/Stop Watch Timer.
    Activates the Club Channel Monitor.
    Indicates the DC Supply Voltage.
    Setting of the display’s illumination level.
    Programming of the DTMF Autodialer.
    Selects the category which is recalled from the top panel
    /
    key.

    15

    FKEY SEL

    Assigns a function to the Function Key.

    16
    17
    18

    ID LIST
    ID REG
    MESSAGE

    Programming a Member List for the Message feature.
    Sets your Personal ID for the Message feature.
    Programming a Message for the Message feature.

    19

    MIC GAIN

    Adjust the microphone gain level.

    20

    MIC PRGM

    Select the function of the microphone’s [PGM] key.

    21

    PAGER

    22

    PTT LOCK

    23
    24
    25

    PTT MODE
    RPT ARS
    RPT MODE

    88

    OFF/ON MIN/ON MID/ON MAX
    OFF/ AM AUTO / AM HOLD/
    FM AUTO/ FM HOLD/ LI AUTO
    / LI HOLD
    LOW-3/LOW-2/LOW-1/
    NORMAL/HIGH-1/HIGH-2
    OFF/OV ALERT/LV ALERT/ HV
    ALERT
    TOGGLE/AUTOBACK
    KEY+SC/KEY/OFF
    OFF/ON
    OFF/PTT/VOX HIGH/VOX LOW
    OFF/ON
    OFF/AUTO/HOLD
    --DIMMER 1 ~ DIMMER 5
    --FNC/FNC+MSG/MSG
    AF DUAL, ARTS, DIMMER,
    HORN 1, HORN 2, HORN 3,
    HORN 4, INTERCOM, MONI,
    PA, REVERSE, SCAN, SQL
    LEVL, SSCH, TCALL, TX
    POWER, VOL.ITCOM
    ------MIN/LOW/NORMAL/HIGH/
    MAX
    TX LOW/RPTR/SQLTYP/REV/
    TSQLF/DCODE/MONI/TCALL/
    SSCH/ARTS/TAG/MHz/SCAN/
    CLUB/WX

    Enables/Disables the Enhanced CTCSS Paging & Code Squelch
    function and setting the Receiving/Transmitting Pager Code for the
    OFF/ON
    Enhanced CTCSS Paging & Code Squelch function.
    Enables/Disables the locking of the PTT key when the LOCK mode
    OFF/ON
    is activated.
    Selects the PTT key function.
    MOMENT/TOGGLE
    Enables/Disables the Automatic Repeater Shift function.
    ON/OFF
    Sets the Repeater Shift Direction.
    RPTR OFF/RPTR-/RPTR+ (Ú)

    FTM-10R OPERATING MANUAL



  • Page 91

    MENU (“SET”) MODE
    Item
    #

    Menu Item

    Function

    26

    RPT SFT

    Sets the magnitude of the repeater Shift.

    27
    28

    RX EXP
    RX F CCL

    Enables/Disables the band expansion.
    Shifting of the CPU clock frequency.

    29

    RX M MOD

    Selects the receiving mode.

    30
    31

    SCN CVRG
    SCN DRCT

    Selects the Scan range.
    Select the Scan type.

    32

    SCN MODE

    Selects the Scan Resume mode.

    33

    SCN STRT

    34
    35
    36
    37

    SPEAKER
    SQL BELL
    SQL DCS
    SQL EXP

    38

    SQL LEVL

    39

    SQL TSQF

    40

    SQL TYPE

    41

    STEP

    42
    43
    44
    45

    STEREO
    TOT
    TX POWER
    VOL.ITCOM

    46

    VOX MIC

    47
    48
    49

    VOX SENS
    WIRES
    WX ALERT

    Available Values
    (Default: Bold Itaric)
    0.00 ~ 99.95 MHz (Ú)
    (50 kHz increments)
    NORMAL/EXPAND
    OFF/ON
    AUTO/WIDE FM/FMNARR FM/
    AM
    IN BAND/HAM BAND
    NORMAL/RETURN
    BUSY/HOLD/TIME 3S/TIME
    5S/TIME 10S

    Select the scan start direction which initiates the scanner using the
    UP START/DN.START
    scan command by pressing the
    key.
    Select the Speaker to be used.
    REAR/F+R/FRONT/OFF
    Selects the number of CTCSS/DCS/EPCS Bell ringer repetitions.
    OFF/1T/3T/5T/8T/CONT
    Setting of the DCS code.
    104 standard DCS codes (023)
    Enables/Disables split CTCSS/DCS coding.
    OFF/ON
    SQL OFF/SQL MIN/SQL 01 ~
    SQL 06/ SQL MAX
    Set the squelch threshold level.
    Amateur Bands: SQL 01
    AM: SQL 01, FM: SQL 02
    Setting of the CTCSS Tone Frequency.
    50 CTCSS Tones (100 Hz)
    OFF/TONE ENC/TONE SQL/
    Selects the Tone Encoder and/or Decoder mode.
    REV TONE/DCS
    5.00/6.25/8.33/10.00/12.50/
    Setting of the synthesizer steps.
    15.00/20.00/25.00/50.00/
    100.00/200.00 kHz, AUTO
    Select the audio output.
    STEREO/MONO
    Setting of the TOT time.
    1MIN ~ 30MIN, OFF
    Selects the transmit power output level.
    LOW/MID/HIGH
    Sets the volume level of the intercom mode.
    IVOL HI/IVOL LOW
    VOX OFF/R-HAND/F-HAND/
    Enables/Disables VOX operation.
    FRONT
    Sets the VOX sensitivity.
    MIN/1/2/3/4/5/6/7/8/MAX
    Enable/Disable the Internet Connection feature.
    OFF/CODE/MEM
    Enables/Disables the Weather Alert Scan feature.
    OFF/ON

    Ú: Depends on the band of operation.

    FTM-10R OPERATING MANUAL

    89



  • Page 92

    MENU (“SET”) MODE
    REPEATER SETTING

    SET MODE ITEM

    AVAILABLE VALUES (DEFAULT)

    CTCSS/DCS/DTMF SETTING

    SET MODE ITEM

    AVAILABLE VALUES (DEFAULT)

    Enables/Disables the Automatic Repeater Shift function.
    Sets the Repeater Shift Direction.
    Sets the magnitude of the repeater Shift.
    Programming of the DTMF Autodialer.
    Enables/Disables the Enhanced CTCSS Paging & Code Squelch function and setting the Receiving/Transmitting Pager Code for the Enhanced
    CTCSS Paging & Code Squelch function.
    Selects the number of CTCSS/DCS/EPCS Bell ringer repetitions.
    Setting of the DCS code.
    Enables/Disables split CTCSS/DCS coding.
    Setting of the CTCSS Tone Frequency.
    Selects the Tone Encoder and/or Decoder mode.

    SCAN SETTING

    Activates the Club Channel Monitor.
    Selects the Scan range.
    Select the Scan type.
    Selects the Scan Resume mode.

    24 RPT ARS
    25 RPT MODE
    26 RPT SFT
    13 DTMF
    21 PAGER
    35
    36
    37
    39
    40

    SQL BELL
    SQL DCS
    SQL EXP
    SQL TSQF
    SQL TYPE

    SET MODE ITEM
    10
    30
    31
    32

    CLUB PRI
    SCN CVRG
    SCN DRCT
    SCN MODE

    Select the scan start direction which initiates the scanner using the scan 33 SCN STRT
    command by pressing the
    key.
    49 WX ALERT
    Enables/Disables the Weather Alert Scan feature.

    ON/OFF
    RPTR OFF/RPTR --/RPTR +Ú
    0.00 ~ 99.95 MHzÚ
    --OFF/ON

    OFF/1T/3T/5T/8T/CONT
    104 Standard DCS Code (023)
    OFF/ON
    50 standard CTCSS tones (100 Hz)
    OFF/TONE ENC/TONE SQL/REV
    TONE/DCS

    AVAILABLE VALUES (DEFAULT)

    OFF/AUTO/HOLD
    IN BAND/HAM BAND
    NORMAL/RETURN
    BUSY/HOLD/TIME 3S/TIME 5S/
    TIME 10S
    UP START/DN.START
    OFF/ON

    MESSAGE SETTING

    SET MODE ITEM

    AVAILABLE VALUES (DEFAULT)

    POWER SAVE SETTING

    SET MODE ITEM

    AVAILABLE VALUES (DEFAULT)

    Programming a Member List for the Message feature.
    Sets your Personal ID for the Message feature.
    Programming a Message for the Message feature.

    16 ID LIST
    17 ID REG
    18 MESSAGE

    Enable/Disable the battery saver of the optional BH-1 Bluetooth® Head- 7 BLU SAVE
    set.
    Setting of the TOT time.
    43 TOT
    Selects the transmit power output level.
    44 TX POWER

    MIC/SPEAKER/AUDIO SETTING

    Enables/Disables the Bluetooth® function.
    Adjust the microphone gain level.
    Select the Speaker to be used.
    Select the audio output.
    Sets the volume level of the intercom mode.
    Enables/Disables VOX operation.
    Sets the VOX sensitivity.

    DISPLAY SETTING

    Activates/Disables the Internal Clock/Stop Watch Timer.
    Indicates the DC Supply Voltage.
    Setting of the display’s illumination level.

    90

    SET MODE ITEM
    8
    19
    34
    42
    45
    46

    BLU VOX
    MIC GAIN
    SPEAKER
    STEREO
    VOL.ITCOM
    VOX MIC

    47 VOX SENS

    SET MODE ITEM
    9 CLOCK
    11 DC VOLT
    12 DIMMER

    -------

    OFF/ON

    1MIN ~ 30MIN or OFF
    LOW/MID/HIGH

    AVAILABLE VALUES (DEFAULT)

    OFF/PTT/VOX HIGH/VOX LOW
    MIN/LOW/NORMAL/HIGH/MAX
    REAR/F+R/FRONT/OFF
    STEREO/MONO
    IVOL HI/IVOL LOW
    VOX OFF/R-HAND/F-HAND/
    FRONT
    MIN/1/2/3/4/5/6/7/8/MAX

    AVAILABLE VALUES (DEFAULT)
    OFF/ON
    --DIMMER 1 ~ DIMMER 5

    FTM-10R OPERATING MANUAL



  • Page 93

    MENU (“SET”) MODE
    SWITCH/KNOB SETTING

    Enables/Disables the beeper.
    Selects the category which is recalled from the top panel
    Assigns a function to the Function Key.

    Select the function of the microphone’s [PGM] key.

    SET MODE ITEM
    /

    key.

    6 BEEP
    14 FKEY MOD
    15 FKEY SEL

    20 MIC PRGM

    Enables/Disables the locking of the PTT key when the LOCK mode is 22 PTT LOCK
    activated.
    Selects the PTT key function.
    23 PTT MODE
    Setting of the synthesizer steps.
    41 STEP

    AVAILABLE VALUES (DEFAULT)

    KEY+SC/KEY/OFF
    FNC/FNC+MSG/MSG
    AF DUAL, ARTS, DIMMER, HORN
    1, HORN 2, HORN 3, HORN 4, INTERCOM, MONI, PA, REVERSE,
    SCAN, SQL LEVL, SSCH, TCALL,
    TX POWER, VOL.ITCOM
    TX LOW/RPTR/SQLTYP/REV/
    TSQLF/DCODE/MONI/TCALL/
    SSCH/ARTS/TAG/MHz/SCAN/
    CLUB/WX
    OFF/ON
    MOMENT/TOGGLE
    5.00/6.25/8.33/10.00/12.50/15.00/
    20.00/25.00/50.00/100.00/200.00
    kHz, or AUTO

    WiRES SETTING

    SET MODE ITEM

    AVAILABLE VALUES (DEFAULT)

    MISCELLANEOUS SETTING

    SET MODE ITEM

    AVAILABLE VALUES (DEFAULT)

    Enable/Disable the Internet Connection feature.
    Enables/Disables the Automatic Audio Volume Controller.
    Enables/Disables the AF DUAL operation.

    48 WIRES

    1 AF AUTO
    2 AF DUAL

    Select the Tone Pitch control for the received audio.

    3 AF PITCH

    Enable/Disable the Volume Setting Alert feature.

    4 AF PREST

    Select the DIAL knob and display function.
    Enables/Disables the band expansion.
    Shifting of the CPU clock frequency.
    Selects the receiving mode.

    5
    27
    28
    29

    AF-VFO
    RX EXP
    RX F CCL
    RX M MOD

    Set the squelch threshold level.

    38 SQL LEVEL

    OFF/CODE/MEM

    OFF/ON MIN/ON MID/ON MAX
    OFF/ AM AUTO / AM HOLD/ FM
    AUTO/ FM HOLD/ LI AUTO / LI
    HOLD
    LOW-3/LOW-2/LOW-1/NORMAL/
    HIGH-1/HIGH-2
    OFF/OV ALERT/LV ALERT/ HV
    ALERT
    TOGGLE/AUTOBACK
    NORMAL/EXPAND
    OFF/ON
    AUTO/WIDE FM/FMNARR FM/
    AM
    SQL OFF/SQL MIN/SQL 01/SQL
    02/ SQL 03/ SQL 04/ SQL 05/ SQL
    06/ SQL MAX
    Amateur Bands: SQL 01
    AM: SQL 01, FM: SQL 02

    Ú: Depends on the band of operation.

    FTM-10R OPERATING MANUAL

    91



  • Page 94

    MENU (“SET”) MODE
    Set Mode Item [F1 AF AUTO]
    Function: Enables/Disables the Automatic Audio Volume Controller.
    Available Values: OFF/ON MIN/ON MID/ON MAX
    Default: OFF
    ON MIN: Activates the Automatic Audio Volume Controller with the low effect level.
    ON MID: Activates the Automatic Audio Volume Controller with the medium effect level.
    ON MAX: Activates the Automatic Audio Volume Controller with the high effect level.
    OFF:
    Disable the Automatic Audio Volume Controller.
    Set Mode Item [F2 AF DUAL]
    Function: Enables/Disables the AF DUAL operation.
    Available Values: OFF/AM AUTO/AM HOLD/FM AUTO/FM HOLD/LI AUTO/LI HOLD
    Default: OFF
    AM AUTO: You may listen to the AM Broadcast station while monitoring an amateur band
    frequency. When a signal is received on the amateur band, the FTM-10R will
    receive the amateur band signal. When the amateur signal drops, the AM station will be heard. The FTM-10R will return to the AF Dual function.
    AM HOLD: You may listen to an AM Broadcast station, while monitoring an amateur band
    frequency. When a signal is received on the amateur band, the FTM-10R will
    continuously receive the amateur band, and will not restart the AF Dual function.
    FM AUTO: You may listen to the FM Broadcast station, while monitoring an amateur band
    frequency. When a signal is received on the amateur band, the FTM-10R will
    receive the amateur band signal. When the amateur signal drops, the FM Broadcast station will be heard. The FTM-10R will return to the AF Dual function.
    FM HOLD: You may listen to the FM Broadcast station while monitoring an amateur band
    frequency. When a signal is received on the amateur band, the FTM-10R will
    continuously receive the amateur band, and will not restart the AF Dual function.
    LI AUTO: You may listen to the line audio, while monitoring an amateur band frequency.
    When a signal is received on the amateur band, the FTM-10R will receive the
    amateur band signal. When the amateur signal drops, the line audio will be
    heard. The FTM-10R will return to the AF Dual function
    LI HOLD: You may listen to the line audio, while monitoring an amateur band frequency.
    When a signal is received on the amateur band, the FTM-10R will continuously receive the amateur band, and will not restart the AF Dual function

    92

    FTM-10R OPERATING MANUAL



  • Page 95

    MENU (“SET”) MODE
    Set Mode Item [F3 AF PITCH]
    Function: Select the Tone Pitch control for the received audio.
    Available Values: LOW-3/LOW-2/LOW-1/NORMAL/HIGH-1/HIGH-2
    Default: NORMAL
    Set Mode Item [F4 AF PREST]
    Function: Enable/Disable the Volume Setting Alert feature.
    Available Values: OFF/OV ALERT/LV ALERT/ HV ALERT
    Default: OFF
    OV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knob
    blinks orange when volume level is set to the ±3 steps of the preset level.
    LV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knob
    blinks orange when volume level is set to the preset level minus 3 steps.
    HV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knob
    blinks orange when volume level is set to the preset level plus 3 steps above.
    OFF:
    Disables the Volume Setting Alert feature.
    Set Mode Item [F5 AF-VFO]
    Function: Select the DIAL knob and display function.
    Available Values: TOGGLE/AUTOBACK
    Default: AUTOBACK
    TOGGLE:
    Keeps the DIAL knob function and display until the [VOL/SEL] key is pressed
    once again.
    AUTOBACK: The DIAL knob function and display comes back to frequency selection and
    frequency display after approximately 3 seconds.
    Set Mode Item [F6 BEEP]
    Function: Enables/Disables the beeper.
    Available Values: KEY+SC/KEY/OFF
    Default: KEY+SC
    KEY+SC: The beeper sounds when you press any key, or when the scanner stops.
    KEY:
    The beeper sounds when you press any key.
    OFF:
    Beeper is disabled.
    Set Mode Item [F7 BLU SAVE]
    Function: Enable/Disable the battery saver of the optional BH-1 Bluetooth® Headset.
    Available Values: OFF/ON
    Default: OFF

    FTM-10R OPERATING MANUAL

    93



  • Page 96

    MENU (“SET”) MODE
    F8 BLU VOX
    Set Mode Item [F8
    VOX]
    Function: Enables/Disables the Bluetooth ® function (requires the optional BU-1
    Bluetooth® Unit).
    Available Values: OFF/PTT/VOX HIGH/VOX LOW
    Default: PTT
    OFF:
    Disable the Bluetooth® function.
    PTT:
    Activate Bluetooth® function without the VOX feature.
    VOX HIGH: Activate Bluetooth® function with the VOX feature (VOX gain: High).
    VOX LOW: Activate Bluetooth® function with the VOX feature (VOX gain: Low).
    F9 CLOCK
    Set Mode Item [F9
    CLOCK]
    Function: Activates/Disables the Internal Clock/Stop Watch Timer.
    Available Values: OFF/ON
    Default: OFF
    F10 CLUB PRI
    Set Mode Item [F10
    PRI]
    Function: Activates the Club Channel Monitor.
    Available Values: OFF/AUTO/HOLD
    Default: OFF
    OFF: Disables the Club Channel Monitor feature.
    AUTO: When the FTM-10R receives a signal on the Club Channel, the Club Channel audio is
    heard. Five seconds after the Club Channel signal drops, Club Channel Monitor resumes.
    HOLD: When a signal is received on the Club Channel, the FTM-10R will receive the Club
    Channel continuously, and will not restart the Club Channel monitor.
    F11 DC VOLT
    Set Mode Item [F11
    VOLT]
    Function: Indicates the DC Supply Voltage.
    F12 DIMMER
    Set Mode Item [F12
    DIMMER]
    Function: Setting of the display's illumination level.
    Available Values: DIMMER 1 - DIMMER 5
    Default: 5
    F13 DTMF
    Set Mode Item [F13
    DTMF]
    Function: Programming of the DTMF Autodialer. See page 72 for details.
    F14 FKEY MOD
    Set Mode Item [F14
    MOD]
    Function: Selects the category which is recalled from the top panel
    /
    key.
    Available Values: FNC/FNC+MSG/MSG
    Default: FNC
    FNC:
    Recalls the Public Address feature, Horn Alert Feature, and other features.
    FNC+MSG: Recalls the Public Address feature, Horn Alert Feature, Message, and other
    features.
    MSG:
    Recall the message only.

    94

    FTM-10R OPERATING MANUAL



  • Page 97

    MENU (“SET”) MODE
    Set Mode Item [F15 FKEY SEL]
    Function: Assigns a function to the Function Key.
    Available Values: AF DUAL, ARTS, DIMMER, HORN 1, HORN 2, HORN 3, HORN 4,
    INTERCOM, MONI, PA, REVERSE, SCAN, SQL LEVL, SSCH, TCALL, TX POWER,
    VOL.ITCOM
    Default: PA
    Set Mode Item [F16 ID LIST]
    Function: Programming a Member List for the Message feature. See page 47 for details.
    Set Mode Item [F17 ID REG]
    Function: Sets your Personal ID for the Message feature. See page 49 for details.
    Set Mode Item [F18 MESSAGE]
    Function: Programming a Message for the Message feature. See page 46 for details..
    Set Mode Item [F19 MIC GAIN]
    Function: Adjust the microphone gain level.
    Available Values: MIN/LOW/NORMAL/HIGH/MAX
    Default: NORMAL
    Set Mode Item [F20 MIC PRGM]
    Function: Select the function of the microphone's [PGM] key.
    Available Values: TX LOW/RPTR/SQLTYP/REV/TSQLF/DCODE/MONI/TCALL/SSCH/
    ARTS/TAG/MHz/SCAN/CLUB/WX
    Default: WX
    Set Mode Item [F21 PAGER]
    Function: Enables/Disables the Enhanced CTCSS Paging & Code Squelch function and
    setting the Receiving/Transmitting Pager Code for the Enhanced CTCSS Paging & Code
    Squelch function.
    Available Values: OFF/ON
    Default: OFF
    Set Mode Item [F22 PTT LOCK]
    Function: Enables/Disables the locking of the PTT key when the LOCK mode is activated.
    Available Values: OFF/ON
    Default: OFF
    Set Mode Item [F23 PTT MODE]
    Function: Selects the PTT key function.
    Available Values: MOMENT/TOGGLE
    Default: MOMENT

    FTM-10R OPERATING MANUAL

    95



  • Page 98

    MENU (“SET”) MODE
    F24 RPT ARS
    Set Mode Item [F24
    ARS]
    Function: Enables/Disables the Automatic Repeater Shift function.
    Available Values: ON/OFF
    Default: ON
    F25 RPT MODE
    Set Mode Item [F25
    MODE]
    Function: Sets the Repeater Shift Direction.
    Available Values: RPTR OFF/RPTR -/RPTR +
    Default: Depends on the transceiver version, as well as the setting of Menu Item [F24
    RPT ARS].
    F26 RPT SFT
    Set Mode Item [F26
    SFT]
    Function: Sets the magnitude of the repeater Shift.
    Available Values: 0.00 - 99.95 MHz (50 kHz increments)
    Default: Depends on the operating band and transceiver version.
    F27 RX EXP
    Set Mode Item [F27
    EXP]
    Function: Enables/Disables the band expansion.
    Available Values: NORMAL/EXPAND
    Default: NORMAL
    When this Set Mode Item is set to “EXPAND”, you will receive the following additional
    bands.
    108 - 137 MHz
    300 - 336 MHz
    470 - 800 MHz
    174 - 200 MHz
    336 - 420 MHz
    800 - 999.9875 MHz (cellular blocked)
    F28 RX F CCL
    Set Mode Item [F28
    CCL]
    Function: Shifting of the CPU clock frequency.
    Available Values: OFF/ON
    Default: OFF
    This function is only used to move a spurious response “birdie”, should it fall on a desired
    frequency.
    F29 RX M MOD
    Set Mode Item [F29
    MOD]
    Function: Selects the receiving mode.
    Available Values: AUTO/WIDE FM/FMNARR FM/AM
    Default: AUTO

    96

    FTM-10R OPERATING MANUAL



  • Page 99

    MENU (“SET”) MODE
    F30 SCN CVRG
    Set Mode Item [F30
    CVRG]
    Function: Selects the Scan range.
    Available Values: IN BAND/HAM BAND
    Default: IN BAND
    IN BAND: The FTM-10R considers the 144 MHz Amateur Band and 430 MHz Amateur Band to be independent bands, and scans only the 144 MHz Amateur
    Band, or only the 430 MHz Amateur Band.
    HAM BAND: The FTM-10R considers the 144 MHz Amateur Band and 430 MHz Amateur Band to be one band and scans it when the scan mode is engaged.
    Activate the scanner across the 144 MHz Amateur Band and 430 MHz Amateur Band.
    Set Mode Item [F31 SCN DRCT]
    Function: Select the Scan type.
    Available Values: NORMAL/RETURN
    Default: NORMAL
    NORMAL: When the VFO frequency reaches the high band edge of the current band, the
    VFO frequency will jump to the low band edge of the current band (or vice
    versa).
    RETURN: When the VFO frequency reaches the high band edge of the current band while
    scanning upward, the scanner will reverse direction and scan downwards. (or
    vice versa).
    Set Mode Item [F32 SCN MODE]
    Function: Selects the Scan Resume mode.
    Available Values: BUSY/HOLD/TIME 3S/TIME 5S/TIME 10S
    Default: BUSY
    BUSY:
    The scanner will hold until the signal disappears, then will resume when
    the carrier drops.
    HOLD:
    The scanner will stop when a signal is received, and will not restart.
    TIME 3S/5S/10S: The scanner will hold for selected resume time, then resume whether or
    not the other station is still transmitting.
    Set Mode Item [F33 SCN STRT]
    Function: Select the scan start direction which initiates the scanner using the scan command by pressing the
    key.
    Available Values: UP START/DN.START
    Default: UP START

    FTM-10R OPERATING MANUAL

    97



  • Page 100

    MENU (“SET”) MODE
    F34 SPEAKER
    Set Mode Item [F34
    SPEAKER]
    Function: Select the Speaker to be used.
    Available Values: REAR/F+R/FRONT/OFF
    Default: REAR
    REAR: Outputs the receiving audio from the REAR speaker (located in the transceiver's
    body).
    F+R: Outputs the receiving audio from both FRONT (located in the front panel) and
    REAR speakers.
    FRONT: Outputs the receiving audio from the FRONT (located in the front panel) speaker.
    OFF:
    Disable the FRONT and REAR Speakers.
    F35 SQL BELL
    Set Mode Item [F35
    BELL]
    Function: Selects the number of CTCSS/DCS/EPCS Bell ringer repetitions.
    Available Values: OFF/1T/3T/5T/8T/CONT (Continuous ringing)
    Default: OFF
    F36 SQL DCS
    Set Mode Item [F36
    DCS]
    Function: Setting of the DCS code.
    Available Values: 104 standard DCS codes
    Default: DCS(023)
    F37 SQL EXP
    Set Mode Item [F37
    EXP]
    Function: Enables/Disables split CTCSS/DCS coding.
    Available Values: OFF/ON
    Default: OFF
    When this Set Mode Item is set to “ON”, you will see the following additional parameters
    after the “DCS” parameter while configuring Menu Item “F40 SQL TYPE”.
    DCS ENC: DCS Encode only.
    TONE DCS: Encodes a CTCSS tone and Decodes a DCS code.
    DCS TSQL: Encodes a DCS code and Decodes a CTCSS tone.
    Select the desired operating mode from the selections shown above.
    F38 SQL LEVL
    Set Mode Item [F38
    LEVL]
    Function: Set the squelch threshold level.
    Available Values: SQL OFF/SQL MIN/SQL 01/SQL 02/ SQL 03/ SQL 04/ SQL 05/ SQL
    06/ SQL MAX
    Default: Amateur Bands: SQL 01, AM: SQL 01, FM: SQL 02

    98

    FTM-10R OPERATING MANUAL



  • Page 101

    MENU (“SET”) MODE
    F39 SQL TSQF
    Set Mode Item [F39
    TSQF]
    Function: Setting of the CTCSS Tone Frequency.
    Available Values: 50 standard CTCSS tones
    Default: 100.0 Hz
    F40 SQL TYPE
    Set Mode Item [F40
    TYPE]
    Function: Selects the Tone Encoder and/or Decoder mode.
    Available Values: OFF/TONE ENC/TONE SQL/REV TONE/DCS/
    Default: OFF
    TONE ENC: CTCSS Encoder
    TONE SQL: CTCSS Encoder/Decoder
    REV TONE: Reverse CTCSS Decoder (Mutes receiver when matching tone is received)
    DCS:
    Digital Coded Encoder/Decoder
    Note: See also Menu Item “F37 SQL EXP” regarding additional selections available during
    “Split Tone” operation.
    F41 STEP
    Set Mode Item [F41
    STEP]
    Function: Setting of the synthesizer steps.
    Available Values: 5.00/6.25/8.33/10.00/12.50/15.00/20.00/25.00/50.00/100.00/200.00 kHz,
    or AUTO
    Default: AUTO (Step automatically changes according to operating frequency.)
    Note: 1) AM BC band only selects 9 kHz or 10 kHz.
    Note: 2) FM BC band only selects 50 kHz, 100 kHz, or 200 kHz.
    Note: 3) Steps of 5 kHz, 6.25 kHz, 8.33kHz, and 9 kHz are not available above 470 MHz.
    F42 STEREO
    Set Mode Item [F42
    STEREO]
    Function: Select the audio output.
    Available Values: STEREO/MONO
    Default: MONO
    F43 TOT
    Set Mode Item [F43
    TOT]
    Function: Setting of the TOT time
    Available Values: 1MIN - 30MIN or OFF
    Default: OFF
    The time-out timer shuts off the transmitter after continuous transmission of the programmed
    time.
    F44 TX POWER
    Set Mode Item [F44
    POWER]
    Function: Selects the transmit power output level.
    Available Values: LOW/MID/HIGH
    Default: HIGH

    FTM-10R OPERATING MANUAL

    99



  • Page 102

    MENU (“SET”) MODE
    Set Mode Item [F45 VOL.ITCOM]
    Function: Sets the volume level of the intercom mode.
    Available Values: IVOL HI/IVOL LOW
    Default: IVOL HI
    Set Mode Item [F46 VOX MIC]
    Function: Enables/Disables VOX operation.
    Available Values: VOX OFF/R-HAND/F-HAND/FRONT
    Default: VOX OFF
    VOX OFF: Disable the VOX operation
    R-HAND: Enable the VOX operation for the microphone, which is connected to the rear
    panel MIC Jack.
    F-HAND: Enable the VOX operation for the microphone, which is connected to the front
    panel MIC Jack (requires optional “MEK-M10” Microphone Jack).
    FRONT: Enable the VOX operation for the front panel microphone.
    Set Mode Item [F47 VOX SENS]
    Function: Sets the VOX sensitivity.
    Available Values: MIN/1/2/3/4/5/6/7/8/MAX
    Default: 5
    Set Mode Item [F48 WIRES]
    Function: Enable/Disable the Internet Connection feature.
    Available Values: OFF/CODE/MEM
    Default: OFF
    Set Mode Item [F49 WX ALERT]
    Function: Enables/Disables the Weather Alert Scan feature.
    Available Values: OFF/ON
    Default: OFF

    100

    FTM-10R OPERATING MANUAL



  • Page 103

    APPENDIX
    MH-68B6J MICROPHONE (OPTION)
     PTT Switch

    

    Press this switch to transmit, and release it to receive.

     DWN/UP keys
    Press (or hold in) either of these keys to tune (or scan up or
    down) the operating frequency or through the memory channels. In many ways, these keys emulate the function of the
    FTM-10R’s DIAL knob.



    

    ‘ PGM key
    Press this key to recall the Weather Broadcast Station Memory Bank.
    You may program the configuration of this key, to enable use a different function, via Menu Item “F20 MIC PRGM”. See page 79 for details.

    MH-68A6J MICROPHONE (OPTION)
     PTT Switch

    

    Press this switch to transmit, and release it to receive.

     DWN/UP keys
    Press (or hold in) either of these keys to tune (or scan up or
    down) the operating frequency or through the memory channels. In many ways, these keys emulate the function of the
    FTM-10R’s DIAL knob.

    





    ‘ PGM key
    Press this key to recall the Weather Broadcast Station Memory Bank.
    You may program the configuration of this key, to enable use a different function, via Menu Item “F20 MIC PRGM”. See page 79 for details.

    ’ Keypad
    [1] ~ [0] keys
    This key generates the DTMF “1” ~ “0” tone during transmission, and frequency entry
    digit “1” ~ “0” during Direct keypad Frequency Entry.
    [A] ~ [D], [*], [#] keys
    [A] ¯ This key emulates the function of the FTM-10R’s front panel
    key.
    [B] ¯ This key emulates the function of the FTM-10R’s front panel
    key.
    [C] ¯ This key emulates the function of the FTM-10R’s front panel
    key.
    [D] ¯ This key emulates the function of the FTM-10R’s front panel [VOL/SEL] key.
    [*] ¯ This key emulates the function of the FTM-10R’s top panel
    key.
    [#] ¯ This key emulates the function of the FTM-10R’s top panel
    key.

    FTM-10R OPERATING MANUAL

    101



  • Page 104

    INSTALLATION OF OPTIONAL ACCESSORIES
    MICROPHONE JACK “MEK-M10”
    1. Remove the four screws securing the
    Front Panel and then remove the Front
    Panel from the Transceiver Body.

    4. Remove the two screws affixing the Microphone Jack cover, and then remove
    the Microphone Jack cover from the
    Front Panel.

    2. Disconnect the 8-pin modular plug
    from the Transceiver.

    5. Remove the four screws securing the
    Rear Case of the Front Panel and remove
    the Rear Case from the Front Panel.
    Note: When you remove the rear case,
    you will find a small thin wire near the
    flat ribbon cable. Be careful not to cut or
    add any stress to this wire. It will be connected in step 7.

    3. Remove the screw affixing the Straight
    Sub Panel, and then remove the
    Straight Sub Panel from the Front
    Panel.

    102

    FTM-10R OPERATING MANUAL



  • Page 105

    INSTALLATION OF OPTIONAL ACCESSORIES
    MICROPHONE JACK “MEK-M10”
    6. Attach the “MEK-M10” to the Front
    Panel using the previously removed
    two screws.
    Note: When securing the MEK-M10 to
    the front panel, make sure that the rubber gasket is free of any contaminants
    and properly seated before securing the
    MEK-M10 with the screws. This will
    insure that moisture or water does not
    enter the front panel.

    8. Replace the Rear Case, Sub Panel, and
    8-pin modular plug.
    9. Attach the Front Panel to the Transceiver Body using the previously removed four screws.

    7. Attach the Flat cable to the connector
    on the Printed Circuit Board, and connect the Wire from the “MEK-M10” to
    the Wire from the Printed Circuit Board
    in the front panel.
    Note: Please adjust the terminal side of
    the flat cable to the lower side of the
    connector on the Printed Circuit Board,
    and insert it in the connector.
    Connector

    Connect Wires

    FTM-10R OPERATING MANUAL

    103



  • Page 106

    INSTALLATION OF OPTIONAL ACCESSORIES
    BU-1 Bluetooth® ADAPTER UNIT
    Please be sure to follow these safety precautions:
    P Turn the transceiver power off, and disconnect all cables from the transceiver.
    P Touch a metal place to discharge any static electricity from your body.
    Installing the “BU-1” in the Front Panel
    1. Remove the four screws securing the
    Front Panel and then remove the Front
    Panel from the Transceiver Body.

    2. Disconnect the 8-pin modular plug
    from the Transceiver.

    4. Remove the four screws securing the
    Rear Case of the Front Panel and remove the Rear Case from the Front
    Panel.
    Note: When you remove the rear case,
    you will find a small thin green wire
    near the flat ribbon cable. Be careful
    not to cut or damage this wire.

    5. Carefully align the connector on the
    BU-1 with the connector on the Printed
    Circuit Board, and gently press the
    BU-1 into place.
    connector

    BU-1

    3. Remove the screw affixing the Straight
    Sub Panel, and then remove the
    Straight Sub Panel from the Front
    Panel.

    104

    6. Replace the Rear Case, Sub Panel, and
    8-pin modular plug.
    7. Attach the Front Panel to the Transceiver Body using the previously removed four screws.

    FTM-10R OPERATING MANUAL



  • Page 107

    INSTALLATION OF OPTIONAL ACCESSORIES
    BU-1 Bluetooth® ADAPTER UNIT
    Installing the “BU-1” in the Transceiver Body
    1. Remove the four screws securing the
    Front Panel and then remove the Front
    Panel from the Transceiver Body.

    4. Carefully align the connector on the
    BU-1 with the connector on the Printed
    Circuit Board, and gently press the BU1 into place.
    connector

    2. Disconnect the 8-pin modular plug
    from the Transceiver.
    5. Replace the Top Case, the HEX bolts
    and the 8-pin modular plug.
    6. Attach the Front Panel to the Transceiver Body using the previously removed four screws.

    3. Remove the four HEX bolts securing
    the Top case and carefully separate the
    Top case from the Transceiver Body.
    Note: When you remove the top case,
    you will find a small thin wire. Be careful not to cut or damage this wire.

    FTM-10R OPERATING MANUAL

    105



  • Page 108

    INSTALLATION OF OPTIONAL ACCESSORIES
    CAB-1 Bluetooth® HEAD SET CHARGER SLEEVE
    1. Peel off the blind seal on the Front
    Panel.
    Peel off the blind seal

    2. Attach the “CAB-1” to the Front Panel
    using the supplied two screws.

    106

    FTM-10R OPERATING MANUAL



  • Page 109

    RESET PROCEDURE
    Static electricity may occasionally cause erratic or unpredictable operation of the microprocessor. If this happens, resetting of the microprocessor may restore normal operation. Note
    that resetting the microprocessor will erase all memories.
    1. Turn the radio off.
    2. Press and hold in the [VOL/SEL] key while turning the radio on.
    3. Rotate the DIAL knob to one of the following Reset Menu items:
    SF1 COPY ALL: Transfer all memories and other settings from a transceiver to another
    FTM-10R. This is not a reset operation.
    SF2 COPY MSG: Transfer all messages from a transceiver to another FTM-10R. This is
    not a reset operation.
    SF3 RSET MSG: Resets the messages to factory defaults.
    SF4 RSET SYS: Resets the Menu Item settings to their factory defaults.
    (Except F16 ID LIST, F17 ID REG, F18 MESSAGE, F25 RPT MODE,
    F26 RPT SFT, F28 RX F CCL, F36 SQL DCS, F39 SQL TSQF, F40 SQL
    TYPE, and F44 TX POWER)
    SF5 RSET ALL: Clears all memories and other settings to factory defaults.
    SF6 BLTH R:

    Set up the Bluetooth® device which is connected to the transceiver. This
    is not a reset operation.

    SF7 BLTH F:

    Set up the Bluetooth® device which is connected to the front panel of
    the transceiver. This is not a reset operation.

    4. Once you have made your selection in step 3, press the PTT key and confirm that (YES)
    is displayed on the LCD. Press the PTT key once more to complete the reset procedure.
    (To cancel the reset procedure, turn the transceiver off before pressing the PTT key.)

    FTM-10R OPERATING MANUAL

    107



  • Page 110

    TROUBLESHOOTING
    The LED at the left side of the DIAL knob Blinks in Yellow
    P The Volume Setting Alert feature is turned on.
    Set the Menu Item “F4 AF PREST” to “OFF”. See Page 86

    Receiver audio volume level changes automatically
    P The Automatic Audio Volume Controller is turned on.
    Set the Menu Item “F1 AF AUTO” to “OFF”. See Page 56

    No transmit even if pressing the PTT key
    P PA feature or Horn Alert feature is turned on.
    Turn off these features by the Top panel’s
    /
    /
    keys.
    P PTT Lock feature is turned on.
    Set the Menu Item “F22 PTT LOCK” to “OFF”. See Page 87

    Does not revert to receive after releasing the PTT key
    P PTT mode is set to TOGGLE.
    Set the Menu Item “F23 PTT MODE” to “MOMENT”. See Page 77

    Transmission begins automatically without pressing the PTT key
    P VOX feature is set to on.
    Set the Menu Item “F46 VOX MIC” to “OFF”. See Page 57

    Sound is not emitted from the internal or external speaker
    P Speaker selection is set to “Front”.
    Set the Menu Item “F34 SPEAKER” to “REAR” or “F+R”. See Page 86

    Cannot recall the memory channel data on the Group memory
    P The memory channel has been eliminated from the memory group
    Re-assign the eliminated memory channel via the Menu Item “M1 GROUP”. See Page
    36

    108

    FTM-10R OPERATING MANUAL



  • Page 111

    SPECIFICATIONS
    General
    Frequency Range:

    RX: 0.5 - 1.8 MHz (AM BC)
    76 - 108 MHz (FM BC)
    108-137 MHz (Air Band)
    137-174 MHz (144 MHz HAM)
    174-222 MHz (GR1 VHF TV)
    300-420 MHz (GR2 )
    420-470 MHz (430 MHz HAM)
    470-800 MHz (GR1 UHF TV)
    800-999 MHz (GR2 USA Cellular Blocked)
    TX: 144.000 - 148.000 MHz or 144.000 - 146.000 MHz,
    430.000 - 450.000 MHz or 430.000 - 440.000 MHz
    Channel Steps:
    5/6.25/8.33/(9)/10/12.5/15/20/25/50/100/200 kHz
    (9): AM Only
    Emission Type:
    F3E, F2D, F1D
    Antenna Impedance:
    50 Ohms
    Frequency Stability:
    ±5 ppm @ 14 °F ~ +140 °F (–10 °C ~ +60 °C)
    Operating Temperature Range: –4 °F ~ +140 °F (–20 °C ~ +60 °C)
    Supply Voltage:
    Nominal: 13.8 V DC, Negative Ground
    Operating: 11.7 ~ 15.8 V, Negative Ground
    Current Consumption:
    RX: 0.5 A (Receive)
    (Approx.)
    8.3 A / 6 A / 2A (TX, 144 MHz 50W / 20 W / 5 W)
    8.5 A / 6 A / 2A (TX, 430 MHz 40W / 20 W / 5 W)
    Case Size (W x H x D):
    4.4” x 1.5” x 7” (112 x 37.6 x 178 mm)
    (w/o knobs & connectors)
    Weight (Approx.):
    2.9 lb. (1.3 kg)

    Transmitter
    RF Power Output:
    Modulation Type:
    Maximum Deviation:
    Spurious Radiation:
    Microphone Impedance:

    50/20/5 W (144 MHz)
    40/20/5 W (430 MHz)
    Variable Reactance
    ±5 kHz
    At least –60 dB below
    2 kΩ

    FTM-10R OPERATING MANUAL

    109



  • Page 112

    SPECIFICATIONS
    Receiver
    Circuit Type:
    Intermediate Frequencies:
    Sensitivity:

    Squelch Sensitivity:
    Selectivity :
    AF Output:
    AF Output Impedance:

    FM / AM: Double-Conversion Super heterodyne
    WFM: Triple-Conversion Super heterodyne
    AM / FM Radio:Single-Conversion Super heterodyne
    FM / AM: 1st: 47.25 MHz, 2nd: 450 kHz
    WFM: 1st: 45.8 MHz, 2nd: 10.7MHz, 3rd: 1MHz
    FM Radio: 130 kHz, AM Radio: 50 kHz
    5 µV TYP for 10 dB SN
    (0.5-1.7 MHz, AM)
    2 µV TYP for 12 dB SINAD
    (76-108 MHz, WFM)
    0.8 µV TYP for 10 dB SN
    (108-137 MHz, AM)
    0.2 µV for 12 dB SINAD
    (137-140 MHz, FM)
    0.2 µV for 12 dB SINAD
    (140-150 MHz, FM)
    0.25 µV for 12 dB SINAD
    (150-174 MHz, FM)
    1 µV TYP for 12 dB SINAD
    (174-222 MHz, WFM)
    0.8 µV TYP for 10 dB SN
    (300-336 MHz, AM)
    0.25 µV TYP for 12 dB SINAD (336-420 MHz, FM)
    0.2 µV for 12 dB SINAD
    (420-470 MHz, FM)
    5 µV TYP for 12 dB SINAD
    (470-540 MHz, WFM)
    5 µV TYP for 12 dB SINAD
    (540-800 MHz, WFM)
    0.4 µV TYP for 12 dB SINAD (800-899.99 MHz, FM)
    0.8 µV TYP for 12 dB SINAD (900 - 999.99 MHz, FM)
    USA Version Cellular Blocked
    Better than 0.16 µV (144 / 430 MHz Band)
    NFM, AM 12 kHz / 30 kHz (–6 dB / –60 dB)
    8 W @ 4 Ohm for 10 % THD (@ 13.8 V) BTL EXP SP
    4 W @ 4 Ohm for 10 % THD (@ 13.8 V) Normal EXP SP/CH
    4-16 Ω

    Specifications are subject to change without notice, and are guaranteed within the 144 and
    430 MHz amateur bands only. Frequency ranges will vary according to transceiver version; check with your dealer.

    110

    FTM-10R OPERATING MANUAL



  • Page 113

    NOTE

    FTM-10R OPERATING MANUAL

    111



  • Page 114

    NOTE

    112

    FTM-10R OPERATING MANUAL



  • Page 115

    1. Changes or modifications to this device not expressly approved by VERTEX
    STANDARD could void the user’s authorization to operate this device.
    2. This device complies with part 15 of the FCC Rules. Operation is subject to
    the following two conditions; (1) This device may not cause harmful
    interference, and (2) this device must accept any interference including
    received, interference that may cause undesired operation.
    3. The scanning receiver in this equipment is incapable of tuning, or readily
    being altered, by the User to operate within the frequency bands allocated
    to the Domestic public Cellular Telecommunications Service in Part 22.
    Part 15.21: Changes or modifications to this device not expressly approved by
    Vertex Standard could void the user’s authorization to operate this device.
    DECLARATION BY MANUFACTURER
    The Scanner receiver is not a digital scanner and is incapable of being converted
    or modified to a digital scanner receiver by any user.
    WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR
    RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES
    AND FEDERAL LAW.



  • Page 116

    Copyright 2007
    VERTEX STANDARD CO., LTD.
    All rights reserved.
    No portion of this manual
    may be reproduced
    without the permission of
    VERTEX STANDARD CO., LTD.
    Printed in Japan

    E

    H

    0

    2

    7

    M

    1

    0

    0






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FTM-10R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Yaesu FTM-10R in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 5,87 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info