478469
36
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
34 FTM-10R OPERATING MANUAL
MEMORY RECALL
Once you have stored the desired memories, you may switch from “VFO” mode to “Memory
Recall” mode, and operate on just the stored memory channels.
The FTM-10R has two methods of recalling the memory. (1) Group Memory Mode en-
ables you to recall all the Memory Channels and (2) In-band Memory Mode enables you to
recall only the memory channels which are stored within the same operating band.
All Memory Channel Recall (Group Memory Mode)
1. To recall the Group Memory bank, press the front panel
/ keys until the “GRP” notation appears at the up-
per left corner in the display for a moment. This indicates
that the “Group Memory bank” is now recalled.
2. Rotate the DIAL knob to select the desired memory channel. You may recall any of the
channels stored in the FTM-10R memories.
3. To exit from the Memory Recall mode, press the front panel / keys to select the
desired operating band.
Important Note: The memory channel is assigned to a Group Memory bank automatically.
You may assign/eliminate the memory channel to/from the Group Memory
bank. See page 36 for details of the operation.
Recall a memory channel which is stored in the same operating band
(In-band Memory Mode)
1. Press the front panel / keys to recall the desired operating band.
If you want to recall the 144 MHz band’s memory channel, press the front panel
/ keys to recall the “H-V” icon.
If you want to recall the 430 MHz band’s memory channel, press the front panel
/ keys to recall the “H-U” icon.
2. Press the front panel key briefly. A-MEMORY-” notation will appear on the display
for a moment. This indicates that the “Memory Recall” mode is now engaged.
3. Rotate the DIAL knob to select the desired memory channel. You may recall a memory
channel which is stored in the same operating band of the FTM-10R.
4. To exit from the Memory Recall mode, press the front panel key to return to the
VFO mode.
MEMORY OPERATION
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FTM-10R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info