478469
52
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
50 FTM-10R OPERATING MANUAL
MESSAGE FEATURE
When the Club Channel monitor feature is activated, steps 1 and 2 above are not necessary.
3. Press the top panel or key to select the message you wish to send.
4. Press the top panel key to transmit the selected message on the Club channel fre-
quency.
The “TXM” notation will appear on the display, and the
message will be transmitted. It takes approximately 8 sec-
onds to transmit the message.
When the message transmission is completed, the TX/BUSY
indicator glows white for one second.
Receiving a Message
1. To receive a message, press the front panel or key to recall the Club channel or
activate the Club Channel monitor feature (see page 44).
2. When you receive a message: a beep sounds, the TX/BUSY indicator blinks blue, and
[
“Message” from “sending station’s ID”
]
scrolls on the display.
Press the , , or key to clear the received message, and wait for a new mes-
sage.
CLONING
You can transfer messages or all data stored in one FTM-10R to another FTM-10R by
utilizing the handy “Cloning” feature. The FTM-10Rs Clone feature uses the radio link.
No hardwire connection is needed.
Note: The clone function is realized only by using the Club Channel frequency of 440 MHz
amateur band. Recall and monitor the frequency of the Club Channel. If the channel
is busy (some person is using the frequency and any signal is heard), the message
clone function will not work correctly. In this case, change the Club Channel fre-
quency. See page 52 for details.
Preparations (Source Transceiver)
1. Turn the transceiver off.
2. Press and hold the PTT key while turning the power on
again.
The “TX CLONE” notation and the Club Channel frequency
appear on the display alternately.
Preparations (Destination Transceiver)
1. Turn the transceiver off.
2. Press and hold the
[
VOL/SEL
]
key while turning the power
on again.
3. Rotate the DIAL knob to select the “SF1 COPY ALL”.
52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FTM-10R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info