478469
87
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
85FTM-10R OPERATING MANUAL
AUTOMATIC POWER-OFF
(
APO
)
The “Automatic Power-Off” (APO) feature will turn the radio completely off after a user-
defined period of PTT or key/button inactivity. If you do not press any front panel keys or
buttons, rotate the DIAL knob, use the microphone’s keys and buttons, or transmit, and so
long as the transceiver is not scanning or engaged in priority monitoring, the radio will shut
itself off after the specified time period.
The FTM-10R can operate the Automatic Power-Off feature through the Clock/Timer func-
tion.
The available selections for the time before power-off are 0.5 - 12.0 hours (0.5 hour incre-
ments), as well as APO Off. This feature is useful in minimizing battery drain in a mobile
installation if you forget to turn the transceiver off when you leave your vehicle.
To activate the APO feature:
1. Press the
[
VOL/SEL
]
key repeatedly to display the Clock, Stop Watch Timer, or Ther-
mometer.
2. Press and hold the
[
VOL/SEL
]
key for one second.
3. Rotate the DIAL knob to select Menu Item “T6 APO”.
4. Press the key to enable selection of this Menu Item.
5. Rotate the DIAL knob to select desired time, after which the radio will automatically
shut down. Available selections are 0.5 to 12.0 hours (0.5 hour increments), or Off.
6. Press the
[
VOL/SEL
]
key to save the new setting and exit to Clock/Timer mode.
If there is no action by you within the time interval programmed, a ringer sounds 3 minutes
before the APO shutdown time. Three minutes thereafter, the microprocessor will shut down
the radio automatically.
AUDIO PITCH CONTROL
The FTM-10R includes a feature that lets you choose six special receiver audio responses
to allow the most comfortable and effective reception in noisy environments. The effect is
similar to that provided by a “Tone Control” in a stereo.
1. Press and hold the
[
VOL/SEL
]
key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item “F3 AF PITCH”.
3. Press the key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select the desired receiver audio response. Available selections
are LOW-3, LOW-2, LOW-1, NORMAL, HIGH-1, and HIGH-2.
5. Press the
[
VOL/SEL
]
key to save the new setting and exit to normal operation.
MISCELLANEOUS SETTING
87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FTM-10R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info