478469
99
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
97FTM-10R OPERATING MANUAL
MENU
(
“SET
)
MODE
Set Mode Item [
F30 SCN CVRGF30 SCN CVRG
F30 SCN CVRGF30 SCN CVRG
F30 SCN CVRG]
Function: Selects the Scan range.
Available Values: IN BAND/HAM BAND
Default: IN BAND
IN BAND: The FTM-10R considers the 144 MHz Amateur Band and 430 MHz Ama-
teur Band to be independent bands, and scans only the 144 MHz Amateur
Band, or only the 430 MHz Amateur Band.
HAM BAND:The FTM-10R considers the 144 MHz Amateur Band and 430 MHz Ama-
teur Band to be one band and scans it when the scan mode is engaged.
Activate the scanner across the 144 MHz Amateur Band and 430 MHz Amateur Band.
Set Mode Item
[
F31 SCN DRCTF31 SCN DRCT
F31 SCN DRCTF31 SCN DRCT
F31 SCN DRCT
]
Function: Select the Scan type.
Available Values: NORMAL/RETURN
Default: NORMAL
NORMAL: When the VFO frequency reaches the high band edge of the current band, the
VFO frequency will jump to the low band edge of the current band (or vice
versa).
RETURN: When the VFO frequency reaches the high band edge of the current band while
scanning upward, the scanner will reverse direction and scan downwards. (or
vice versa).
Set Mode Item
[
F32 SCN MODEF32 SCN MODE
F32 SCN MODEF32 SCN MODE
F32 SCN MODE
]
Function: Selects the Scan Resume mode.
Available Values: BUSY/HOLD/TIME 3S/TIME 5S/TIME 10S
Default: BUSY
BUSY: The scanner will hold until the signal disappears, then will resume when
the carrier drops.
HOLD: The scanner will stop when a signal is received, and will not restart.
TIME 3S/5S/10S: The scanner will hold for selected resume time, then resume whether or
not the other station is still transmitting.
Set Mode Item
[
F33 SCN STRTF33 SCN STRT
F33 SCN STRTF33 SCN STRT
F33 SCN STRT
]
Function: Select the scan start direction which initiates the scanner using the scan com-
mand by pressing the key.
Available Values: UP START/DN.START
Default: UP START
99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FTM-10R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info