19272
339
Zoom out
Zoom in
Vorherige Seite
1/341
Nächste Seite
Matsui 96
Memorex 28 36
Minolta 33 49
Mitsubishi 99 44 48 59 52 53
Multitech 97 48 54
NEC 92 94 44 83
Nokia 93 95
Nokia Oceanic 95
Okano 23
Olympic 25 28
Orion 27
Panasonic 25 28 39 55 78 84 85
Pentax 33 49
Philco 25 28
Philips 25 26 28 37 56 57
Phonola 37
Pioneer 25
Quasar 25 28
RCA/PROSCAN 25 26 28 33 35 49 58 69
Realistic 93 97 28 36 59 62
Samsung 54 58 63 64 65 66
Sansui 94
Sanyo 93 36 67
Schneider 37
Scott 99 35 36 48 59 52 54 58
Seleco 22
Sharp 95 62 82
Siemens 93
Signature 2000 95 97
Sony 68 79 72 73 74 75
Sylvania 97 25 26 28
Symphonic 97
Tandberg 34
Tashiro 96
Tatung 92 94
Teac 92 94 97
Technics 25 28
Telefunken 76 77
Thorn 93 96
Toshiba 35 69 89
Universum 96 27 76
W.WHouse 96
Wards 95 96 36 62
DVD
(Device Code: 4)
Yamaha 99 22 23
DENON 99 24
Funai 25
HITACHI 26
JVC 27
KENWOOD 28
Mitsubishi 29
Onkyo 32 33 34
Panasonic 99 35
Philips 23
Pioneer 36 37 38
RCA 39
Samsung 42
Sharp 43
Sony 44
Toshiba 34
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this sound system in a well ventilated, cool, dry, clean
place with at least 5 cm on the top, 5 cm on the left and
right, and 5 cm at the back of AVR-S80, and 20 cm on the
top, 10 cm on the left and right, and 10 cm at the back of
SW-S80 — away from direct sunlight, heat sources,
vibration, dust, moisture, and/or cold.
3 Locate this system away from other electrical appliances,
motors, or transformers to avoid humming sounds. To
prevent fire or electrical shock, do not place this system
where it may get exposed to dripping or splashing, and never
put any objects filled with liquids, such as vases, on the top
of the system.
4 Do not expose this system to sudden temperature changes
from cold to hot, and do not locate this system in a
environment with high humidity (i.e. a room with a
humidifier) to prevent condensation inside this system,
which may cause an electrical shock, fire, damage to this
system, and/or personal injury.
5 Avoid installing this system in a place where foreign objects
and liquid might fall. It might cause a fire, damage to this
system and/or personal injury. Do not place the following
objects on this system:
Other components, as they may cause damage and/or
discoloration on the surface of this system.
Burning objects (i.e. candles), as they may cause fire,
damage to this system, and/or personal injury.
Containers with liquid in them, as they may cause
electrical shock to the user and/or damage to this system.
6 Do not cover this system with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this system rises, it may cause fire,
damage to this system, and/or personal injury.
7 Do not plug in this system to a wall outlet until all
connections are complete.
8 Do not operate this system upside-down. It may overheat,
possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cord from the wall outlet,
grasp the plug; do not pull the cord.
11 Do not clean this system with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this system must be used. Using
this system with a higher voltage than specified is dangerous
and may cause fire, damage to this system, and/or personal
injury. YAMAHA will not be held responsible for any
damage resulting from use of this system with a voltage
other than specified.
13 To prevent damage by lightning, disconnect the power cord
from the wall outlet during an electrical storm.
14 Take care of this system so that no foreign objects and/or
liquid drops inside this system.
15 Do not attempt to modify or fix this system. Contact
qualified YAMAHA service personnel when any service is
needed. The cabinet should never be opened for any reasons.
16 When not planning to use this system for long periods of
time (i.e. vacation), disconnect the AC power plug from the
wall outlet.
17 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this system
is faulty.
18 Before moving this system, press STANDBY/ON to set this
system in the standby mode, and disconnect the AC power
plug from the wall outlet.
CAUTION: READ THIS BEFORE OPERATING YOUR SYSTEM.
19 VOLTAGE SELECTOR (China, Korean and General models
only)
The VOLTAGE SELECTOR on the rear panel of AVR-S80
and SW-S80 must be set for your local main voltage
BEFORE plugging into the AC main supply.
Voltages are 110–120V/220–240 V AC, 50/60 Hz.
This system is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this system
itself is turned off. This state is called the standby mode. In
this state, this system is designed to consume a very small
quantity of power.
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the instructions
described below.
Note
The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
Special Instructions for U.K.
Model
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L or
coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
The name plate is located on the bottom of AVR-S80.
FREQUENCY STEP switch
(China, Korean and General models only)
Because the interstation frequency spacing differs in different
areas, set the FREQUENCY STEP switch (locating at the rear of
AVR-S80) according to the frequency spacing in your area.
North, Central and South America: 100 kHz/10 kHz
Other area: 50 kHz/9 kHz
Before setting this switch, disconnect the AC
power plug of this system from the AC outlet.
FREQUENCY STEP
50
K
Hz
100
K
Hz
FM
9
K
Hz
10
K
Hz
AM
CAUTION
101_S80_H14(G)14mm 02.6.17, 11:13 PM2
339

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha AVXS80 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha AVXS80

Yamaha AVXS80 Bedienungsanleitung - Englisch - 55 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info