Bedienungsanleitung Yamaha CLP-370 (Seite 2 von 3) (Englisch)

590641

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

CLP-370/340/S308/S306 Version 1.60 New Functions

When you use Internet Direct Connection (IDC) for the first time, you should make the

Internet settings (Wireless LAN) on the instrument, then save all of the settings. This section

explains how to configure the setting using the USB Wireless LAN adapter (using DHCP).

Using the push-button method for WPS setup

When the Wireless LAN router (access point) you are using is compatible with the push-

button method for WPS setup, the settings for the wireless network can be automatically

made.

1. Call up the Function mode.

Press the [TEMPO/FUNCTION] button to call up the function mode.

2. Select Function F9.y (on the CLP-370/340) or F8.y (on the

CLP-S308/S306).

Use the [TEMPO/FUNCTION , ] buttons to select Function F9.y (CLP-370/340)

or F8.y (CLP-S308/S306).

3. Enter the Sub-mode Selection mode following the F9 (on

the CLP-370/340) or F8 (on the CLP-S308/S306).

Press the [+/YES] button to enter the Sub-mode Selection mode.

4. Select Function F9.8 (on the CLP-370/340) or F8.8 (on the

CLP-S308/S306).

Use the [TEMPO/FUNCTION , ] buttons to select Function F9.8 (CLP-370/340)

or F8.8 (CLP-S308/S306).

5. Enter the setting using WPS (Push Button).

Press the [+/YES] button to enter the setting using WPS (Push Button).

6. Press the WPS button of the access point you are using

within two minutes.

The settings for SSID, channel, security and key are automatically configured. The

process of settings using the WPS (PushButton) is executed and then “End” message

will appear on the display. If the settings are successfully completed, the settings

are automatically saved.

The items (SSID, channel, security and key) related to Wireless LAN are saved this

time and values of the other items are initialized. The settings using the push-button

method for WPS setup is complete.

7. Exit from function mode.

Press the [+/YES] button or [-/NO] button to exit from the Sub-mode.

To exit from the function mode, press the [TEMPO/FUNCTION] button (as described

in Step 5 on page 61 in the Owner’s Manual).

About the Internet Settings (settings related to the push-button

method for WPS setup)

If you are not using a USB Wireless

LAN adapter (using DHCP), refer to

the following URL:

http://services.music.yamaha.com/

radio/connect.html

The function mode cannot be

engaged while voice demo song

playback is in use, when the [REC]

button is on, or when user song

playback is active.

For information about the

confirmation and changes in the

setting of the access point side,

read the owner’s manual for the

specific Wireless LAN router

(access point) you are using.

If the settings are not successfully

completed, an “Err” message and

the error code will appear alternately

on the display. To return to the

previous indication, press the [-/NO]

or [+/YES] button.

About the Error Codes

You can check the descriptions for

the error codes on the Yamaha

website:

http://services.music.yamaha.com/

radio/faq.html

For details about settings, refer to the following URL:

http://services.music.yamaha.com/radio/connect.html

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-370 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-370

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info