Bedienungsanleitung Yamaha CLP-565GP (Seite 6 von 15) (Englisch)

590828

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Computer-related Operations

Playing Back Songs on a Computer via the Instrument Sounds

With the use of MIDI file playback software on your computer, you can play back Songs (MIDI files) via the sounds

of the connected instrument. This section covers the basic procedure. For detailed instructions, refer to the manual of

your particular MIDI file playback software.

Connect the instrument to a computer.

Start the MIDI file playback software/application on the computer.

Have a Standard MIDI file ready on the computer.

From the playback software, select the connected instrument as the MIDI output destination.

Start playback of the MIDI file on the playback software.

The MIDI data played back on the computer will be transmitted to the instrument, allowing you to hear the Song

being played by the Voice sounds of the instrument.

Recording Your Keyboard Performance to a Computer

By using Music Production software on the computer, you can record your keyboard performance as MIDI data. For

detailed instructions, refer to the manual of the application. This section covers the basic settings you need to make

on the instrument for recording. Keep in mind that some of the following functions may not be built into the instru-

ment.

Local Control settings

When recording the keyboard performance to the connected computer, the MIDI data you play will be trans-

mitted to the computer then returned back to the instrument. This causes a “double” sound, since the tone

generator of the instrument receives the keyboard performance data directly from the keyboard as well as the

computer. To avoid this situation, set Local Control to “Off,” in order to separate the tone generator of the

instrument from the keyboard.

NOTE

• When you use a software synthesizer as a tone generator, be sure to make settings on the computer application so that the MIDI data received

from the instrument will not be returned back to the instrument, in addition to setting Local Control to “Off.”

External Clock

When you record Style/Arpeggio playback, you should set which clock is used, that of the instrument or the

computer. If you use the clock of the computer, make settings on the instrument so that Style/Arpeggio play-

back follows the external clock.

MIDI Transmit settings

Make settings so that Style/Arpeggio playback as well as the keyboard performance will be transmitted to

the computer. Note that some instruments cannot transmit playback data.

Transmitting the Panel Settings (Initial Send)

By executing this before recording, you can record the panel settings to the beginning of the Song data. This

ensures that the proper and expected sounds will be produced when the recorded Song plays back.

Instrument

Playback

Record

Instrument

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-565GP Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-565GP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info