Bedienungsanleitung Yamaha dvd s 530 (Seite 25 von 27) (Englisch)

139096

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

English

Troubleshooting

Refer to the chart below when this unit does not function properly. If the problem you are

experiencing is not listed below or if the instruction below does not help, set this unit to the

standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer

or service center.

Problem Solution

No power – Check if the AC power cord is properly connected.

– Press Standby-On button on this unit.

No picture – Check if the TV is switched on.

– Check the video connection.

Distorted picture – Check the disc for fingerprints and clean the disc

with a soft cloth, wiping from the centre to the edge.

– Sometimes a small amount of picture distortion may

appear. This is not a malfunction.

Completely distorted picture or – Make sure the NTSC/PAL setting at this unit matches

black/white picture with DVD the video signal of your television.

or Video CD (See NTSC/PAL Settings)

– The disc format does not match your TV’s video

signal (PAL/NTSC).

No sound or distorted sound – Adjust the volume.

– Check that the speakers are connected correctly.

– Select another audio language (if available on the

DVD video disc)

No audio at digital output – Check the digital connections.

– Check the settings menu to make sure the digital

output is set to All or PCM only.

– Check if the audio format of the selected audio

language matches your receiver capabilities.

– MP3 Audio is not available on the Digital Output.

Disc can’t be played. – Ensure the disc label is facing up.

– Clean the disc.

– Check if the disc is defective by trying another disc.

–

Check if the disc is badly scratched or warped (not flat).

– Check the disc for the correct region code.

Picture freezes momentarily –Check the disc for fingerprints/scratches and clean

during playback with a soft cloth wiping from centre to edge.

No return to start-up screen when –

Reset the unit by switching this unit off, then on

disc is removed again.

This unit does not respond to – Aim the remote control directly at the sensor on

the remote control. the front of this unit.

– Reduce the distance to this unit.

– Replace the batteries in the remote control.

– Re-insert the batteries with their polarities (+/–

signs) as indicated.

Buttons do not work or this unit stops –To completely reset this unit, unplug the AC

responding. cord from the AC outlet for 5-10 seconds.

This unit does not respond to some – Operations may not be permitted by the disc.

operating commands during playback. Refer to the instructions of the disc.

This unit does not respond to any –Turn on your TV and follow the procedures on

command when turned on for the first the screen to decide initial setup items.

time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha dvd s 530 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha dvd s 530

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info