Bedienungsanleitung Yamaha MusicCast SUB100 - NS-NSW100 (Seite 3 von 22) (Englisch)

707004

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

3 En

CAUTION

This content indicates “risk of injury.”

Power supply/power cord

• Do not use an AC outlet where the power plug fits loosely when

inserted. Failure to observe this may cause a fire, electric

shocks, or burns.

• When removing the electric plug from the unit or an AC outlet,

always hold the plug itself and not the cord. Pulling by the cord

can damage it and cause electric shocks or a fire.

• Insert the power plug firmly all the way into the AC outlet.

Using the unit when it is not plugged in sufficiently can cause

dust to accumulate on the plug, causing a fire or burns.

Installation

• Do not place the unit in an unstable position where it might

accidentally drop or fall over and cause injuries.

• Do not block this unit's ventilation holes (cooling slits). This

unit has ventilation holes on the rear to prevent the internal

temperature from becoming too high. Failure to observe this

may trap heat inside the unit, causing a fire or malfunctions.

• When installing this unit:

– Do not cover it with any cloth.

– Make sure the top surface faces up; do not install on its sides

or upside down.

– Do not use the device in a confined, poorly-ventilated

location.

Failure to observe the above may trap heat inside the unit,

causing a fire or malfunctions. Ensure that there is adequate

space around the unit: at least 20 cm (7-7/8 in) on top, 20 cm (7-

7/8 in) on the sides, and 20 cm (7-7/8 in) on the rear.

• Do not install the unit in places where it may come into contact

with corrosive gases or salt air or places that have excessive

smoke or steam. Doing so may result in malfunction.

• Avoid being near the unit during a disaster, such as an

earthquake. Since the unit may turn over or fall and cause

injury, quickly move away from the unit and go to a safe place.

• Before moving this unit, be sure to turn off the power switch

and disconnect all connection cables. Failure to observe this

may damage the cables or cause you or someone else to trip

and fall.

• When transporting or moving the unit always use two or more

people. Attempting to lift the unit by yourself may damage your

back, result in other injury, or cause damage to the unit itself.

Hearing loss

• Do not use the unit/speakers or headphones for a long period of

time at a high or uncomfortable volume level, since this can

cause permanent hearing loss. If you experience any hearing

loss or ringing in the ears, consult a physician.

• Before connecting the unit to other devices, turn off the power

for all devices. Failing to do so may result in hearing loss,

electric shock, or device damage.

• When turning on the AC power in your audio system, always

turn on the amplifier or receiver LAST, to avoid hearing loss

and speaker damage. When turning the power off, the amplifier

or receiver should be turned off FIRST for the same reason.

Failure to observe the above may cause hearing impairment or

speaker damage.

Maintenance

• Remove the power plug from the AC outlet before cleaning the

unit. Failure to observe this may cause electric shocks.

Handling

• Do not insert your hand or fingers into panel slits of this unit.

Failure to observe this may cause injury.

• Do not insert foreign materials such as metal or paper into panel

slits of this unit. Failure to observe this may cause a fire,

electric shocks, or malfunctions. If foreign material gets into the

unit, immediately shut off the power and pull the power plug

from the AC outlet and request an inspection from the dealer

where you purchased the unit or from qualified Yamaha service

personnel.

• Do not do the following:

– stand on or sit on the equipment.

– put heavy items on top of the equipment.

– place the equipment in a stack.

– apply unreasonable force to buttons, switches, input/output

terminals, etc.

• Avoid pulling the connected cables to prevent injuries or

damage to the unit by causing it to fall.

• Do not operate the unit if the sound is distorting. Prolonged use

in this condition could cause overheating and result in fire.

NOTICE

Indicates points that you must observe in order to

prevent product failure, damage or malfunction and

data loss.

Power supply/power cord

• If not using the unit for a long period of time, be sure to pull the

power plug from the outlet. Even if the [(A)] (Standby/On)

switch has been turned off (the power light is off), a minute

current is still flowing.

Installation

• Do not use this unit in the vicinity of other electronic

equipment, such as a TV, radio, or mobile phone. Failure to

observe this may cause this unit or the TV or radio to produce

noise.

• Do not use this unit in a location that is exposed to direct

sunlight that becomes extremely hot, such as near a heater, or

extremely cold, or that is subject to excessive dust or vibration.

Failure to observe this may cause the unit's panel to become

deformed, the internal components to malfunction, or for

operation to become unstable.

• Install this unit as far away from other electronic equipment as

possible.

Digital signals from this unit may interfere with other electronic

equipment.

• If using a wireless function, avoid installing this unit near metal

walls or desks, microwave ovens, or other wireless network

devices. Obstructions could shorten the transmission distance.

Connections

• If connecting external units, be sure to thoroughly read the

manual for each unit and connect them in accordance with the

instructions.

Failure to properly handle a unit in accordance with the

instructions could cause malfunctions.

Handling

• Do not place vinyl, plastic, or rubber products on this unit.

Failure to observe this may cause discoloration or deformation

in the panel of this unit.

• If the ambient temperature changes drastically (such as during

unit transportation or under rapid heating or cooling) and there

is a chance condensation may have formed in the unit, leave the

unit for several hours without turning on the power until it is

completely dry before use. Using the unit while there is

condensation can cause malfunctions.

Yamaha MusicCast SUB100 - NS-NSW100 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info