Bedienungsanleitung Yamaha MX-A5000 (Seite 4 von 100) (Deutsch, Englisch, Französisch, Spanisch)

549952

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

2 En Features

Features

High-quality power amplifier

■ High output/high audio-quality

amplifier (150 W x 11 channels)

The unit provides an 11-channel power amplifier

featuring a three-stage Darlington current feedback

circuit, with a power supply that uses the same type of

toroidal transformer used in top-level hi-fi audio devices.

The gold-plated speaker connectors are also of the

highest quality, delivering high-grade sound.

■ Balance and unbalanced

connections are supported

Balanced (XLR) and unbalanced (RCA) input jacks are

provided on all channels, and can be selected

independently for each channel.

Balanced connections minimize the extraneous noise

that can arise in the cable connection between the unit

and the pre-amplifier, ensuring high-fidelity transmission

of the audio signal.

Unbalanced connections utilize ground-sensing to

achieve fidelity that is close to balanced transmission.

■ Chassis structure that maximizes

the potential of the unit's

performance

The chassis features a special structure that allows the

full potential of the high-quality power amplifier’s

potential to be revealed.

• Symmetrical power amplifier design

• Aluminum front panel and side panels

• Extremely stable feet utilizing the A.R.T.

(Anti-Resonance Technology)

Expandable to meet diverse needs

■ Freedom for speaker placement

Since power amplifiers of the identical specification are

provided for all 11 channels, you use the unit not only

for constructing a home theater setup of up to

11 channels but also for multi-room systems or any

other speaker configuration to meet your needs.

■ Support for bi-amp connections

and multi-speaker playback

The unit provides a channel selector function that lets

you utilize bi-amp connections or multi-speaker

connections without having to connect additional

cables from your pre-amplifier. For example, the CH.2

audio input could be output from both the CH.2 and

CH.3 speaker outputs to drive a bi-amp configuration

for high-quality sound, or the CH.1 (monaural) input

could be output from three speakers connected to CH.1

and CH.4 (L/R).

■ Switch the unit's power from your

pre-amplifier (trigger function)

The unit can switch its own power status in

synchronization with power switching operations on

another device that supports the trigger function, such

as an AV pre-amplifier (TRIGGER IN). The input signal

from the TRIGGER IN jack can also be output without

change in a cascade connection to switch the power of

another device such as a Yamaha subwoofer

(THROUGH OUT). In addition, another device can be

switched in synchronization when the power of the unit

is switched (TRIGGER OUT), allowing you to set up a

variety of systems with synchronized power switching.

Pre-amplifier

MX-A5000_om_UCTKABGLVF.book Page 2 Thursday, April 4, 2013 5:28 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MX-A5000 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MX-A5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info