Bedienungsanleitung Yamaha PSR 125 (Seite 5 von 30) (Deutsch, Englisch, Französisch, Spanisch)

460061

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Power Requirements

Although the PSR-125 will run either from an optional AC

adaptor or batteries, Yamaha recommends use of an AC

adaptor whenever possible. An AC adaptor is more

environmentally friendly than batteries and does not

deplete resources.

Using an AC Power Adaptor

To connect your PSR-125 to a wall socket, you will need

the optionally available Yamaha PA-3/3B/3C Power

Adaptor. Use of other AC adaptors could result in

damage to the instrument, so be sure to ask for the right

kind. Connect one end of the adaptor to the DC IN 12V

jack on the rear panel of your PSR-125, and the other end

to a suitable electrical outlet.

DC IN 12V

WARNING

Use ONLY the Yamaha PA-3/3B/3C AC Power Adaptor (or other

adaptor specifically recommended by Yamaha) to power your

instrument from the AC mains. The use of other adaptors may

result in irreparable damage to both the adaptor and the PSR-125.

CAUTION

Unplug the AC Power Adaptor when not using the PSR-125, or

during electrical storms.

Using Batteries

● Inserting Batteries

Turn the instrument upside-down and remove the battery

compartment lid. Insert six 1.5-volt size “C” batteries as

shown in the illustration, making sure that the positive and

negative terminals are properly aligned. Replace the lid.

Accessory Jacks

Using Headphones

For private practicing and playing without disturbing

others, connect a set of stereo headphones to the rear

panel PHONES/OUTPUT jack. Sound from the built-in

speaker system is automatically cut off when you insert a

headphone plug into this jack.

PHONES/OUTPUT

Connecting a Keyboard Amplifier

or Stereo System

After making sure the PortaTone and any external devices

are turned off, connect one end of a stereo audio cable to

the LINE IN or AUX. IN jack(s) of the other device and the

other end to the PHONES/OUTPUT jack of the PortaTone.

The Music Stand

Insert the bottom edge of the music stand into the slot

located at the top rear of the PSR-125 control panel.

● When the Batteries Run Down

When the batteries run low and the battery voltage drops

below a certain level, the PortaTone may not sound or

function properly. As soon as this happens, replace them

with a complete set of six new batteries.

CAUTION

Never mix old and new batteries or different types of batteries

(e.g., alkaline and manganese).

CAUTION

To prevent possible damage from battery leakage, remove the

batteries from the instrument if it is not to be used for a long time.

● Auto Power OFF

The PSR-125 features an Auto Power OFF function that

automatically turns the power OFF if the instrument is not

used for approximately 30 minutes. This functions

whether batteries or the AC power adaptor is used.

Getting Started

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR 125 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha PSR 125

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info