Bedienungsanleitung Yamaha S03 BL (Seite 23 von 26) (Englisch)

588953

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

OMS Settings (Macintosh)

The Voice Editor software uses OMS (Open Music System) for MIDI input/output. To use the Voice

Editor software, OMS must be installed beforehand.

n For information about installing OMS, refer to the separate Installation Guide.

About OMS

Voice Editor uses the OMS (Open Music System) to transfer MIDI data to an external MIDI device.

OMS is a system extension that goes in the Mac OS System folder, designed to manage the MIDI

data stream (input & output) in a computer, to enable MIDI data transfer between MIDI software

and hardware attached to the computer. OMS is a de facto standard of the MIDI environment

under the Mac OS, and various music software manufacturers have released OMS-compatible

sequencer and other software.

OMS has the following merits:

• As OMS-compatible MIDI applications communicate with various MIDI devices via OMS, it is

no longer necessary for you to set up multiple MIDI drivers for those applications. Thus, you

can avoid conﬂicts between different drivers with the same purpose (MIDI control).

• Once a Studio Setup is read in OMS, any OMS-compatible application will be aware of it, even

if you need to reconﬁgure the routing of the MIDI data stream or change the current Studio

Setup. OMS-compatible applications will commonly recognize the new conﬁguration.

• You can have different Studio Setups to choose one from, to switch to a different MIDI routing

(patches between MIDI devices and software) fast and easily.

• Every time the OMS Setup application is opened, any MIDI device connected to the computer

is automatically detected, and its icon appears with a current MIDI status (channel number,

port number, patches, etc.). Once devices are conﬁgured with OMS Setup, however, you need

not care too much about the status.

• OMS can drive various MIDI interfaces, including the standard type (16 channels) and the

multi-port type (16 channels per port). If you use a multi-port type, you can control over 16

channels simultaneously via OMS.

n For more information about OMS features, see the READ ME ﬁle included with OMS.

Setting up OMS

Setup ﬁles for the S03 have already been created for use with Voice Editor; please use the

appropriate ﬁle for your device.

1. First, interconnect the “TO HOST” terminal of the S03 and the Macintosh serial port, then set

the “Host Select” switch of the S03 to “Mac.”

2. Double-click the “OMS Setup” icon in the “OMS Application” folder.

3. Choose “Open” from the “File” menu and select “S03-Modem” from within the “OMS setup for

YAMAHA” folder.

n If you are using a computer with no modem port (such as the Performa series), look in the “S03-Printer”

folder instead.

4. Choose “Make Current” from the “File” menu. The setup for your S03 is now saved as the

current studio setup.

5. Choose “Quit” from the “File” menu to close OMS Setup.

n Voice Editor is not compatible with versions of OMS earlier than 2.0.

VoiceEditor.fm Page 23 Tuesday, January 30, 2001 10:31 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S03 BL Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S03 BL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info