Bedienungsanleitung Yamaha S08 (Seite 25 von 26) (Englisch)

586916

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

An Example of Voice Editor in Use

There is no single way in which to use the many components in Voice Editor. Although your editing

needs may differ, in any case, the following gives a step-by-step example of how to use Voice

Editor. The Library Window is the ﬁrst window to open, so that’s where the explanation begins.

nIn the Library Window, you can open existing Library ﬁles containing the Voices you wish to edit, and speciﬁc

voices can be imported to the Library Window.

1. Click the “Editor Setup” button in the toolbar of the Library Window to open the “Editor Setup”

dialog. Then select the appropriate MIDI Out Port and Device No. settings for your synthesizer

(See the section “Editor Setup” Dialog).

nIf you are using a Macintosh, you will also need to make settings in OMS (page 23).

2. Open the Library ﬁle. In the Voice List of the Library Window, double-click the voice you wish to

edit. The Edit Window will open for the voice.

3. Various units are arranged in the Edit Window. First, let’s set the parameters for Elements 1 to

4 on the Element Unit which make up the voice. Open the dialogs for Elements 1 to 4, select

the waveforms, and adjust the tonal characteristics of the voice using the ﬁlter and other

settings. You can use the graph editors in each dialog to visually edit the parameters.

nYou can edit the Element parameters in much ﬁner detail within the “EL Detail” dialogs. The Element

dialogs are linked to the “EL Detail” dialogs, so changes in one dialog are immediately reﬂected in the

other. You can simultaneously view the graphs and the “EL Detail” dialogs side-by-side while editing.

nBy clicking or dragging on the buttons of the keyboard at the bottom of the Edit Window, you can monitor

the voice you are editing.

nBy enabling the “Compare” button in the toolbar in the Edit Window, you can make A/B comparisons

between the original voice and the edited voice.

4. Select the Variation Effect Type in the VARIATION EFFECT Unit and set the remaining

parameters.

5. Set the parameters in the SYSTEM EFFECT Unit.

6. Set the Velocity and Portamento parameters if necessary.

7. Click the “Store” button in the toolbar of the Edit Window to open the “Store” dialog. This will

store the edits for the current voice in the Library ﬁle.

nThe edits for the voice are only stored in the Library ﬁle temporarily. Beware that if you proceed further

without saving the Library ﬁle itself, you will lose all your edits.

8. Switch back to the Library Window and click the “Save” button in the toolbar to save (overwrite)

the Library ﬁle. The edits for your voice will be saved with the voice itself in the designated

voice list location.

nThe Library ﬁle you have saved can be opened in the Library Window at any time. Voices in the Library

Window can be transmitted to your synthesizer.

nYou can create a variety of different Library ﬁles, each tailored for live performances, recording, etc.

Thus, you can conveniently modify voices to suit different situations and needs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S08 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S08

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info