733739
7
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
10 11
GB GB
Always keep the extension cable well away from the
cutting tools. Should the power cable become damaged
during work, instantly disconnect the power cable
from the mains. DO NOT TOUCH THE POWER CABLE
BEFORE IT HAS BEEN DISCONNECTED FROM THE
MAINS! Risk of electric shock.
The supply cord cannot be replaced. If the cord is
damaged the appliance should be scrapped.
Keep extension cable away from blades and other
moving parts. They may damage the cable and result in
contact with live parts.
Check that the mains voltage is the same as indicated on
the rating plate.
MAINTENANCE AND STORAGE
Keep all nuts, bolts and screws tight to be sure the
machine is in a safe working condition.
Replace worn or damaged parts for safety.
Ensure that only the recommended replacement cutting
blades are fitted.
Ensure that batteries are charged using the charger
supplied or recommended by the manufacturer. Incorrect
use may result in electric shock, overheating or leakage
of corrosive liquid from the battery.
Servicing of the machine should be carried out according
to manufacturer's instructions.
In the event of leakage of electrolyte, flush with water/
neutralising agent, seek medical help if it comes into
contact with the eyes.
Store the appliance with battery pack fully charged at
room temperature (around 20 °C).
Every deep discharge cycle decreases the capacity of
battery pack. To prolong battery life, it is recommended
to charge the battery every 6 months over extended
periods of time without use.
TRANSPORT
The original packaging should be used when transporting
the Robotic Mower over long distances.
To safely move from or within the working areas:
Press the STOP button to stop the mower.
Move the main switch button to the OFF position if you
intended to carry the mower.
Carry the Robotic Mower using the handle below at the
rear. Carry the mower with the blade disc away from the
body.
PRODUCT SAFETY WARNINGS
Do not touch moving hazardous parts before these have
come to a complete stop.
Do not store anything heavy on the top of the Robotic
Mower or docking station both during storage or when in
use.
Never use the device if the main power switch is damaged
or does not work properly. Never modify the main power
switch. Set the main power switch to OFF for storage or
when the device is not in use. Use the original packaging
when transporting the Robotic Mower, especially for long
distances.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

yard-force-compact-280r

Suche zurücksetzen

  • Hallo ! Mein 280er bleibt ständig stehen und das Signal blinkt. Das Kabel ist aber in Ordnung. Weiß jemand eine Lösung? Eingereicht am 5-6-2024 16:58

    Antworten Frage melden
  • Robo hat keine Kantenmähfunktion mehr Kann ich Ihn auf Werkseinstellung zurücksetzen und wie Eingereicht am 12-4-2022 12:07

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yardforce Compact 280R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yardforce Compact 280R

Yardforce Compact 280R Installationsanweisung - Englisch - 10 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info