Bedienungsanleitung Yardforce M0E-16ET-410 (Seite 4 von 29) (Deutsch, Englisch)

734946

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

4 5

TECHNICAL SPECIFICATIONS

Model Number M0E-16ET-410

Voltage 18V d.c.

Battery type Lithium-Ion

No load speed 1400/min

Cutting length/Capacity 410mm/14mm

Tooth gap 16mm

Measured sound pressure level(L

) 75dB(A) K=3.0 dB(A)

Measured sound power level(L

) 87.9dB(A) K=3.0 dB(A)

Guaranteed sound power level(L

) 90 dB(A)

Weight 3.4 kg

Vibrations 2.0 m/s² K=1.5 m/s²

Battery pack

Battery pack B0P-SP02-20-15B

Battery type Lithium-Ion

Battery capacity 1500mAh

Battery voltage 18V d.c.

Charger

Charger Type SMVCH001212000G

Rated Voltage 230-240V~/50Hz

Nominal Consumption 50W

Output Voltage of Charge 21V d.c.

Output Current of Charge 2A

Charging time Approx.60min

Protection Class Class II

Protection Category IPX0

The sound values have been determined according to noise test code given in EN 60745-

2-15, using the basic standards EN ISO 11094 and EN ISO 3744.

The noise Abb.ures quoted are emission levels and are not necessarily safe working levels.

Factors that inuence the actual level of exposure of work-force include the characteristics

of the work room, the other sources of noise, etc. i.e. the number of machines and other

adjacent processes, and the length of time for which an operator is exposed to the noise.

Also the permissible exposure level can vary from country. This information, however, will

enable the user of the machine to make a better evaluation of the hazard and risk.

Wear hearing protection! The sound intensity level for the operator may exceed 80 dB (A)

and ear protection measures are necessary!

The declared vibration value has been measured in accordance with a standard test

method (according to EN 12096) and may be used for comparing one product with

another. The declared vibration value may also be used in a preliminary assessment of

exposure.

This tool may cause hand-arm vibration syndrome if its use is not adequately managed.

INTENDED USE

This Li-ion pole hedge trimmer M0E-16ET-460 is intended for trimming hedges, bushes

and shrubs. Observe the technical data for the maximum cutting capacity. Do not cut non

plant material or branches exceeding the stated maximum capacity. For safety reasons it

is essential to read the entire instruction manual before rst operation and to observe all

the instructions there in. This product is intended for private domestic use only, not for any

commercial trade use. It must not be used for any purposes other than those described.

TECHNICAL SPECIFICATIONS

WARNING!

Depending on the actual use of the product the vibration values can differ from the

declared total! Adopt proper measures to protect yourself against vibration exposures!

Take the whole work process including times the product is running under no load or

switched off into consideration!

Proper measures include among others regular maintenance and care of the product and

cutting attachments, keeping hands warm, periodical breaks and proper planning of work

processes!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yardforce M0E-16ET-410 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info