779824
8
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
12
GB
- After re- enter the new PIN, press button OK complete this setting.
Language
1. Press the button to enter the menu setting.
2. Select related number to set the language you require.
WiFi settings
Press the button to enter the menu setting.
There are 3 further options in “WiFi”.
Config
Select this option when you need to connect you mower to APP, see APP manual
Status
Show currently WiFi status
Mode
Client Mode-Default mode
Direct Mode-select this mode when you choose direct mode connection you on your phone.
Signal setting
- Set you require signal by pressing S1 or S2 button.
Sensor setting
1. Press the button to enter the menu setting.
2. Press the button to enter the sensor setting.
- UltraSonic sensor
This machine equipped 2 ultrasonic sensors which may detect the obstacle on the lawn. When the
sensor is actived, the robot will stop and then turn around when detect an obstacle.
Press to switch off the sensor.
Press to elect the detect distance you require.
- Rain sensor
NOTE: Mowing in the rain is not recommended.
This machine has a rain sensor which may stop the robot from mowing in the rain. When the
rain sensor is triggered, the robot will go back to the charging station first, where it will be fully
charged. Once charged the mower will remain in the charging station until the rain has stopped
before starting to mow again.
Note: Be careful not to short circuit the sensors on the machine with any metal objects. This will
cause the mower to work abnormally.
Press to switch off the sensor.
Press to set the extra time.
PIN code
1. Press the button to enter the menu setting.
2. Press the button to enter the PIN setting.
- This option sets the passcode of the mower to prevent theft or unauthorised change of the
menu settings. The existing (old) passcode is required to change to a new passcode. If you have
forgotten the passcode, contact your local dealer or after sales service.
The default passcode of the mower is “0000”.
Timer Sensor PIN English
1234
Sensor Settings
1 2
UltraSonic
Rain
Raning Setting
ON OFF Settings
12 3
Delay Time In Charging
002 minute
UltraSonic Setting
30 cm (30-60)
UltraSonic Setting
ON OFF Settings
12 3
Timer Sensor PIN English
1234
Enter Old PIN Code
* * * *
12
Re-Enter New PIN Code
* * * *
* * * *
Enter New PIN Code
Current Language Setting
English Svenska Deutsh
5
1 2 3
WiFi
Config Status Mode
123
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yardforce NX 100i wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info