799251
182
Zoom out
Zoom in
Vorherige Seite
1/184
Nächste Seite
Yealink VP59 & SIP-T58A Phones User Guide
181
3. Do one of the following:
lSelect Ping, then enter the desired IP address or URL in the Ping IP or URL field.
lSelect Trace Route, then enter the desired IP address or URL in the Trace Route IP or URL field.
4. Select Start.
The screen displays the network status information.
Rebooting Your Phone
The improper operation may cause malfunction. If the malfunction occurs, your system administrator may ask you to
reboot your phone.
Procedure
1. Swipe left or right to go to the second idle screen.
2. Go to Settings >Basic Settings >Reboot >Reboot.
The phone prompts you to reboot the phone or not.
3. Select OK.
Tip: You can also long press the * key on the keypad when the phone is idle to reboot the phone.
Resetting to Factory Settings
When some issues occur on your phone and you have tried all troubleshooting suggestions but still do not solve
the problem, you can reset your phone to factory configurations.
This operation will delete all your personal configuration settings, and reset all settings to the factory defaults.
Check with your system administrator if the personalized settings are kept before resetting your phone to factory set-
tings.
Procedure
1. Swipe left or right to go to the second idle screen.
2. Go to Settings >Advanced Settings (default password: admin) > Reset Config.
2. Select Reset to Factory Settings.
The phone prompts you to reset the setting or not.
3. Select OK.
The phone begins resetting.
Tip: You can also long press the Redial key when the phone is idle.
After reset, the screen prompts “Welcome Initializing…Please wait”.
The phone will be reset successfully after startup.
Note: Reset of your phone may take a few minutes. Do not power off until the phone has started up successfully.
Updating the Phone Configuration
Your system administrator may ask you to update the configuration for your phone to apply any changes to system
settings, which you can do without restarting it.
Procedure
1. Swipe left or right to go to the second idle screen.
2. Go to Settings >Basic Settings >Update Configuration.
182

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yealink SIP-T58 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info