36015
37
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
35FT-7800R OPERATING MANUAL
MEMORY OPERATION
REGULAR MEMORY CHANNEL OPERATION
Deleting Memories
With 1000 “Regular” memories available (except memory channel “1”), there frequently
are situations where you may desire to delete certain memorized frequencies. The procedure
for deleting a channel is quite simple:
1. Press the
[
V/M
(
MW
)]
key, if needed, to enter the Memory mode.
2. Press and hold in the
[
V/M
(
MW
)]
key for 1/2 second, then rotate the DIAL knob to select
the memory channel to be deleted. Note that memory channel “1” may not be deleted.
3. Press the
[
SCAN
(
SEL
)]
key momentarily. The display will revert to memory channel
1.” If you rotate the DIAL knob to the location you just deleted, you will observe that it
is now invisible.
Note: Once deleted, the channel data cannot be recovered.
HOME Channel Memory
A special one-touch “HOME” channel is
available (one for each of the five operat-
ing bands), to allow quick recall of a fa-
vorite operating frequency on each band.
HOME memory storage is simple to accom-
plish:
1. Select the desired frequency, while operating in the VFO mode. Be sure to set up any
desired CTCSS or DCS tones, as well as any desired repeater offset. The power level
may also be set at this time, if you wish to store it.
2. Press and hold in the
[
V/M
(
MW
)]
key for one second. A memory number will appear
(blinking) on the display.
3. While the memory channel number is blinking, just press the
[
TONE
(
HM/RV
)]
key.
The frequency and other data (if any) will now be stored in the special HOME channel
register.
4. You may repeat this process on the other operating bands.
5. To recall the HOME channel, just press the
[
V/M
(
MW
)]
key momentarily while operat-
ing in the MR mode. From the VFO mode, press the
[
V/M
(
MW
)]
key twice. While you are operating on the
Home channel. an “H” icon will appear on the display.
You may also append to an Alpha-numeric “Tag” to a Home channel:
1. Recall the HOME channel which you wish to append a label.
2. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the enter the Set mode.
3. Rotate the DIAL knob to select Menu #24 (NM WRT).
4. Press the
[
BAND
(
SET
)]
key twice, then rotate the DIAL
knob to select the first character in the name you wish to
B
AND
FREQUENCY
USA VERSION EXP VERSION
144 MHz Ham Band 146.520 MHz 144.000 MHz
250 MHz Band 250.000 MHz 250.000 MHz
350 MHz Band 350.000 MHz 350.000 MHz
430 MHz Ham Band 446.000 MHz 430.000 MHz
850 MHz Band 850.000 MHz 850.000 MHz
DEFAULT HOME CHANNELS
37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT-7800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info