36015
38
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
36 FT-7800R OPERATING MANUAL
store, the press the
[
BAND
(
SET
)]
key momentarily to
move on to the next character. Letters, numbers, and
symbols are available for storage.
5. Again rotate the DIAL knob to select the desired letter,
number, or symbol, then press the
[
BAND
(
SET
)]
key
momentarily to move on to the next characters slot. If
you make a mistake, press the microphone’s
[
DWN
]
button to move back to the previous
characters slot, then re-select the correct letter, number, or symbol.
6. Repeat the above step to program the remaining letters,
numbers, or symbols of the desired label. A total of six
characters may be used in the creation of a label.
7. When you have completed the creation of the label, press the
[
BAND
(
SET
)]
key mo-
mentarily to save the label, then press and hold in the
[
BAND
(
SET
)]
key momentarily
for 1/2 second to normal operation.
8. When recall the Home channel which is appended an alpha-numeric “Tag” (label), press
the microphone’s
[
B
]
key momentarily to switch the
Home channel display between the “Frequency” format
and “Alpha-numeric Tag” format.
Menu #16 (HM/REV) allows configuration of the way you can access the “HOME”
channel. See page 70.
Memory Bank Operation
Memory Bank Assignment
1. Recall the memory channel to be assigned to a Memory Bank. Memory channels L1/U1
~ L50/U50 (band/scanning limit memories) may not be assigned to a Memory Bank.
2. Press and hold in the
[
SCAN
(
SEL
)]
key for 1/2 sec-
ond, then rotate the DIAL knob to select the Memory
Bank you want as the Memory Bank for this channel
(“BANK1” ~ “BANK20” ).
3. Press and hold in the
[
V/M
(
MW
)]
key
for 1/2 second to lock in the selected
Memory Bank, then press the
[
V/M
(
MW
)]
key momentarily to copy
the memory channel data into the
Memory Bank.
1) You may assign one memory channel into several Memory Banks.
2) The PMS memory channels (L1/U1 through L50/U50) may not be assigned to
a Memory Bank.
MEMORY OPERATION
REGULAR MEMORY CHANNEL OPERATION
Memory Channel
CH 000 145.000 MHz
CH 001 145.500 MHz
CH 002 435.000 MHz
CH 003 435.500 MHz
CH 004 145.800 MHz
CH 005 436.000 MHz
CH 006 128.800 MHz
CH 997 145.620 MHz
CH 998 436.780 MHz
CH 999 128.600 MHz
Memory Bank “5
Air Band Channels
Memory Bank “4
Club Channels
Memory Bank “3
All Amateur Band Channels
Memory Bank “1
144 MHz Amateur Band Channels
Memory Bank “2
430 MHz Amateur Band Channels
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT-7800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info