36015
58
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
56 FT-7800R OPERATING MANUAL
The FT-7800R can be used to access a repeater or base station which is configured to
provide access to the Vertex Standard WIRES
TM
(Wide-Coverage Internet Repeater En-
hancement System) operating in the “SRG” (“Sister Radio Group”) mode.
1. Press the
[ ]
key momentarily to activate the WIRES
TM
access capability. The “ ” icon will appear on the dis-
play.
2. Press and hold in the
[ ]
key for 1/2 second, rotate the DIAL knob to select the access
number (ICOD0” ~ “9,” “A,” “B,” “C,” “D,” “E (),” or “F (#)”) corresponding to the
WIRES
TM
repeater to which you wish to establish an
Internet link (ask your repeater owner/operator if you
don’t know the access numbers in the network), then
press the
[ ]
key momentarily to lock in the selected access number.
3. With the WIRES
TM
capability activated (as in step 1 above), the FT-7800R will gener-
ate a brief (0.1 second) DTMF tone according to your selection in step 2. This DTMF
tone is sent at the beginning of every transmission to establish or maintain the link to the
remote WIRES
TM
repeater.
4. To disable the WIRES
TM
access capability, press the
[ ]
key again.
You may access other Internet Linking Systems (including WIRES™ in the “FRG” mode)
that use a DTMF string for access.
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #14 (DT WRT).
3. Press the
[
BAND
(
SET
)]
key momentarily, then load the
DTMF tones which you wish to use to establish an
Internet link (ask your repeater owner/operator if you don’t know the access numbers in
the network) into the desired DTMF Memory channel.
1) Rotate the DIAL knob to select the DTMF Autodialer
memory channel number (“d-1” through “d-16”).
2) Press the
[
BAND
(
SET
)]
key momentarily.
3) Rotate the DIAL knob to select the DTMF code, then
press the
[
BAND
(
SET
)]
key momentarily to move
the digit.
4) Repeat step (3) above to complete the DTMF string.
5) Press and hold the
[
BAND
(
SET
)]
key for 1/2 sec-
ond to save the new setting, then press and hold the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal
operation.
4. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second
to enter the Set mode again, then rotate the DIAL knob
to select Menu #18 (I NET).
INTERNET CONNECTION FEATURE
58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT-7800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info