36015
60
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
58 FT-7800R OPERATING MANUAL
TIME-OUT TIMER
The “Time-Out Timer” (TOT) feature is designed to force the transceiver into the “receive”
mode after a preset time period of continuous transmission (the default is 6 minutes). This
feature prevents your transceiver from transmitting a “dead carrier” for a long period of time
in the event that the microphone PTT switch is accidentally locked in the “TX” condition.
The Time-Out Timer’s “switch-to-receive” time may be adjusted, in one minute increments,
for any period between 1 and 30 minutes.
To change the default (6 minute) time setting, use the following procedure:
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #45 (TOT).
3. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
theDIAL knob to select the desired interval (between 1
and 30 minutes), or OFF. You will hear a beep, while
rotating the DIAL knob, as you pass the default six-
minute selection.
4. Press the
[
BAND
(
SET
)]
key momentarily to save the new setting, then press and hold in
the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
When the TOT Timer reaches 10 seconds before the TOT shut-down time, a ringer sounds
to alert you to the impending shut-down.
AUTOMATIC POWER-OFF
The “Automatic Power-Off” (APO) feature will turn the radio completely off after a user-
defined period of PTT switch or key/button inactivity. If you do not press any front panel
keys or buttons, rotate the DIAL knobs or use the microphone’s keys and buttons, or transmit,
and so long as the transceiver is not scanning or engaged in priority monitoring, the radio will
shut itself off after the specified time period. This feature is useful in minimizing battery drain
in a mobile installation if you forget to turn the transceiver off when you leave your vehicle.
To activate the APO feature, use the following procedure:
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #1 (APO).
3. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to set the desired “switch-off” time (be-
tween 0.5 and 12 hours in 0.5 hours increments), or OFF
(the default selection).
4. Press the
[
BAND
(
SET
)]
key momentarily to save the
new setting, then press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to exit to
normal operation.
MISCELLANEOUS SETTINGS
60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT-7800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info