36015
63
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
61FT-7800R OPERATING MANUAL
MISCELLANEOUS SETTINGS
PROGRAMMING THE KEY ASSIGNMENTS
For Menu #28 PRG P1
(
PRG ACC
)
, #29 PRG P2
(
PRG P
)
, #30 PRG P3
(
PRG P1
)
, #31 PRG P4
(
PRG P2
)
Function
< SQ.OF >
< TCAL >
< SSCH >
< ARTS >
< TN.FQ >
< DCSC>
< WX >
< RPTR >
< PRI >
< LOW >
< TONE >
< MHz >
< REV >
< HOME >
< BAND >
< V/M >
< SCAN >
Press the button
Disable the noise squelch action, al-
lowing you to hear very weak signals
near the background noise level.
Activates 1750 Hz Tone Burst.
Activate the Smart Search operation.
Activate the ARTS
TM
operation.
Select the CTCSS Tone Frequency.
(
Short-cut to Menu #44: TN FRQ
)
Select the DCS code.
(
Short-cut to Menu #9: DCS.COD
)
Recall the Weather Broadcast Chan-
nels.
Selects Repeater Shift direction.
Activates the Priority Channel Scan-
ning (Dual Watch).
Selects the transmit power output
level.
Activates the CTCSS or DCS opera-
tion.
Allows tuning in 1-MHz step on the
VFO frequency.
Reverses the transmit and receive
frequencies during split-frequency
operation.
Recall the Home Channel.
Switches operating band.
Switches frequency control among
the VFO, Memory System, and
Home channel.
Activate the Scanner.
Press and hold the button
Disable the noise squelch action, al-
lowing you to hear very weak signals
near the background noise level.
Activates 1750 Hz Tone Burst.
Activate the ARTS
TM
operation.
Selects Repeater Shift direction.
Recall the Weather Broadcast Chan-
nels.
Reverses the transmit and receive
frequencies during split-frequency
(repeater) operation.
Activates the Priority Channel Scan-
ning (Dual Watch).
Selects Repeater Shift direction.
Switch the Memory Channel display
between the “Frequency” format and
“Alpha-numeric Tag” format.
Enter the Set (“Menu”) mode.
Transfer the VFO contents into a
Memory register.
Select the scan mode.
For Menu #27 PRG PNL
Press and hold the
[
LOW
(
ACC
)]
key
Recall the Weather Broadcast Channels.
Reverses the transmit and receive frequencies during split-frequency op-
eration.
Selects Repeater Shift direction.
Disable the noise squelch action, allowing you to hear very weak signals
near the background noise level.
Selects the Key locking schemes.
(
Short-cut to Menu #21: LOCK
)
Sets the display Brightness.
Function
< WX >
< REV >
< RPTR >
< SQ.OF >
< LOCK >
< DIM >
63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT-7800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info