Bedienungsanleitung Zagg Folio - iPad (Seite 2 von 4) (Englisch)

669139

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

INSERTING/REMOVING YOUR iPAD®

TROUBLESHOOTING

If your iPad does not respond to your Folio there may be a simple

explanation such as a dead battery or an unsuccessful pairing. Please use

the following to help troubleshoot your situation. If none of the following

solve your issue, then please contact ZAGG customer service and one of

our trained professionals will be happy to assist you.

1. .Restart your iPad by holding down the home and power button

simultaneously until it restarts. Let go of the buttons when you see the

Apple logo.

2. Turn your Folio o and back on. You should see the left LED status light

illuminate brieﬂy, if not, charge your Folio.

3. After charging, turn your Folio on. If the left LED status light does not

illuminate, and your keyboard doesn’t operate correctly, please contact

ZAGG’s customer support.

4. Forget and re-pair your Folio. On your iPad, select: Settings > General >

Bluetooth > On. If you see “ZAGGkeys Folio” listed as an available

device, touch the arrow to the right of it and choose to have your iPad

forget the device.

5. Push the PAIR button on your Folio and watch for the right LED status

light to ﬂash blue.

6. Your iPad should display “ZAGGkeys Folio” as an available device.

Select it.

7. If your iPad gives you an error message, repeat the pairing process.

8. If you still can’t get your Folio to pair, it is possible your iPad needs to

have its software updated.

To update your iPad’s software, follow these steps:

1. Plug your iPad into your computer, and open iTunes®.

2. In iTunes, select your iPad.

3. Choose to check for software updates.

4. If an update is available, please install it. This will take a few minutes to

download from Apple.

5. After your update is complete, repeat the troubleshooting process*.

* If you continually receive the same error message during pairing, or the above steps don’t work, please

contact ZAGG’s customer support for assistance.

To insert your iPad® into the Folio start with

the Folio’s keyboard facing you. Then, with

your iPad in landscape mode and the

volume control buttons facing out (the

Home button is on your right) set the

bottom half of your iPad in the cover,

making sure it is settled (you may need to

apply light pressure to your iPad to ensure

it is settled at the bottom of the cover).

To easily remove your iPad, simply grasp

the top of the Folio’s cover in the middle

and apply a light pressure to the back of

your iPad. Grasp your iPad’s exposed side

and lift/pull away from the Folio.

When your iPad is secure in the Folio, you

can close it and cleverly placed magnets will

activate your iPad’s sleep/wake feature to

help preserve battery life. Simply open your

Folio to wake your iPad.

Next, snap the top half into the cover.

Check all corners to make sure they have

seated properly as well.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zagg Folio - iPad Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info