Bedienungsanleitung Zelmer 17Z015 (Seite 29 von 32) (Englisch, Polnisch)

538870

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

29GW17-034_v01

The rising of the water level in the kettle is

delayed in relation to the speed of pouring. It

is caused by the lter slowing down the speed

of the ow.

This can be prevented by pouring the last

portions of water extremely carefully before

reaching the maximum level on the indicator.

If an empty kettle is switched on, it will be

switched off by a thermal device automatically.

To turn the kettle on again after it has cooled

down (approx. 15 minutes), take it off the base,

replace it and turn the kettle on by pressing

the switch. To accelerate the cooling of the

kettle, pour cold water into the kettle.

When the water has reached the boiling point, the kettle switches off

automatically, the switch returns to its starting position – the light comes off.

If further use of the kettle is anticipated, it is not necessary to remove the

plug of the connecting cord from the power socket.

Cleaning and maintenance

Always clean a cold kettle!

Remove the plug of the connecting cord from the power socket. –

Take out the lter. –

Clean the outside surfaces with a soft cloth moistened with washing-up –

liquid.

To remove the build-up of hard water lm from the outside and inside –

walls of the kettle, wipe them with a cloth moistened with vineger.

Rinse the kettle with fresh water. –

Filter replacement – descaling

If scale builds up on the bottom of the kettle, it needs to be removed. Use

6% or 10% vinegar for this purpose.

Open the lid. –

Take out the lter from socket – “A” and from the runners by moving it in

the direction shown by “2”.

Wash it under running water. –

Pour 0.5 l of vinegar into the kettle and turn on the kettle. –

Boil the vinegar and leave it in the kettle for about 30 minutes. –

Pour the vinegar out and rinse the –

kettle with fresh water.

Fill up the kettle with fresh water, –

boil the water and pour it out after

is has boiled.

Repeat the procedure if there still is –

scale on the bottom.

When the procedure is nished, –

replace the ter in the kettle

following the procedure of taking it

out in reverse order.

Negligence in descaling the kettle

may result in its damage.

Ecology – Environment protection

Each user can protect the natural environment. It is neither

difcult nor expensive.

In order to do it: put the cardboard packing into recycling

paper container; put the polyethylene (PE) bags into container

for plastic.

When worn out, dispose the appliance to particular disposal

centre, because of the dangerous elements of this appliance,

which can be hazardous for natural environment.

Do not dispose into the domestic waste disposal!!!

removing

the lter

replacing

the lter

The manufacturer/importer does not accept any liability for any damages resulting

from unintended use or improper handling. The manufacturer/importer reserves

his rights to modify the product any time in order to adjust it to law regulations,

norms, directives, or due to construction, trade, aesthetic or other reasons, without

notifying in advance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 17Z015 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info