538929
49
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
49GW41-001_v01
LED on the display panel will form a “b” symbol. Only the function
indicator will be on. After 2 hours the Keep warm mode will be
turned off.
6. At any moment the cooker may be turned off by pushing the Power on/
off button.
Fry function
1. Turn on the cooker by pressing the Power on/off button. Using the
MENU key select the Fry function. The Fry function indicator will lit up.
The default temperature is 220°C. The heat power indicators will be
on. To choose some other temperature values press the “+” or “-” keys.
You can choose from 8 different temperature presets: 60°C, 90°C,
120°C, 140°C, 160°C, 180°C, 200°C and 220°C, which correspond to
power of: 800 W, 800 W, 1000 W, 1000 W, 1400 W, 1600 W, 1800 W
and 2000 W. The Fry function may be changed at any time to other
functions by pressing the MENU key.
2. To adjust and select the temperature, press the “+” or “-” keys. When the
temperature reaches the maximum level, the “+” key will be disabled.
Consequently, when the temperature is at its minimum level, the cooker
will not respond to pressing the “-” key.
3. To set time for the process, press the TIMER key (you can select from
00:01 to 23:59 minutes). The time set will be counting down on the
display panel. If the settings were not changed, the default time will be
15 minutes (in such a case the display panel will show temperature and
not time). Furthermore, if you change the time settings, the Power (W)
indicator will not be lit up and the heat power indicators will ash on
a rotation basis from left to right until the process is over.
4. In order to check the temperature level, press the MENU key. The
indicator will lit up and the display panel will show information about the
temperature level. You have now 5 seconds to change the temperature
settings. If no changes were made, the cooker will go back to the
settings and the display panel will show the remaining time of the
function.
5. The function does not support the Keep warm mode. You will be
informed about the end of the process by a ten-times sound signal.
6. At any moment the cooker may be turned off by pushing the Power on/
off button.
Stir Fry function
1. Turn on the cooker by pressing the Power on/off button. Using the
MENU key select the Stir Fry function. The Stir Fry function indicator
will lit up. The default temperature is 2000. The heat power indicators
will be on. To choose some other power values press the “+” or “-” keys.
You can choose from the following range of presets: 100, 300, 600,
800, 1000, 1200, 1400, 1600, 1800, 2000. The Stir Fry function may be
changed at any time to other functions by pressing the MENU key.
2. To set time for the process, press the TIMER key (you can select from
00:01 to 23:59 minutes). The time set will be counting down on the
display panel. If the settings were not changed, the default time will be
15 minutes (in such a case the display panel will show temperature and
not time). Furthermore, if you change the time settings, the Power (W)
indicator will not be lit up and the heat power indicators will ash on
a rotation basis from left to right until the process is over.
3. In order to check the level of power, press the MENU key. Power (W)
indicator will lit up and the display panel will show information about the
power level. You have now 5 seconds to change the power settings.
If no changes were made, the cooker will go back to the settings and
the display panel will show the remaining time of the function.
4. When the power is at its maximum level, the cooker will disable the “+”
key. Consequently, when the power is at its minimum level, the cooking
will not respond to pressing the “-” key. The tolerance level regarding
the factual power is around -100W, +100W.
5. The function does not support the Keep warm mode. You will be
informed about the end of the process by a ten-times sound signal.
6. At any moment the cooker may be turned off by pushing the Power on/
off button.
Energy saving function
In functions heat milk, keep warm, pressure cook, steam, slow cook,
soup, during which the temperature inside the utensil reaches ca. 60°C
to 80°C, the heating system turns off and the Energy saving indicator is lit
on, informing you that the device is working in energy saving mode. When
the temperature of the utensil drops below ca. 60°C to 80°C, the heating
system turns on and the Energy saving indicator is off.
TIMER function
1. The TIMER option is used to manually set time in standard work modes.
To adjust the time for a process push the TIMER key. Four LED on the
display panel will indicate “xx:xx” starting the countdown, however, only
the “:” between the digits will be pulsating. Furthermore, if you change
the time settings, the Power (W) indicator will not be lit up and the heat
power indicators will ash on a rotation basis from left to right until the
process is over. If the settings were not changed, the default time will
be 15 minutes (in such a case the display panel will show temperature
and not time).
2. The longest time to be set is “23:59”, and the time bracket is between
“00:01” and “23:59”.
3. Manual time adjustment:
Each individual push of the “+” or “-” keys increases or decreases
the time by 1 minute.
Pressing the “+” or “-” key for more than 2 seconds will increase or
decrease the time for 1 or 10 minutes.
The display bracket of minutes ranges from 01 to 59 minutes. If the
minutes on the display are >50 but <10, the unit of change will be
1 minute (e.g. if the time on the display panel is “00 : 51”, it may be
increased by a minute to “00:52”). If the current time in the bracket
of minutes is in the range of 10 to 50, the unit of change will be 10
minutes.
4. Setting the time to “00:00” will cause the cooker to turn off (without any
priori warning signal).
5 You will be informed about the end of the countdown process by a ten-
times sound signal.
PRESET function
1. The Preset function may be used only in the Heat milk, Keep warm,
Pressure cook, Steam, Slow cook and Soup functions. The function
does not allow you to change power, temperature or time (except for
Steam and Slow cook functions, which during the process have the
possibility of time adjustment).
2. Turn on the cooker by pressing the Power on/off button. Push the
PRESET key. The display will indicate “00:01”. To adjust the time setting
for the function in minutes press the “+” or “-” keys within 5 seconds.
After the next push of the PRESET key time will be adjusted in hours.
The longest time to be set is “23:59”.
3. After setting the time for each function, the data will be automatically
saved. The given function indicator will be lit on. The preset time will be
counted down on the display panel. Four LED on the display panel will
indicate “xx:xx” starting the countdown, however, only the “:” between
the digits will be pulsating. After the countdown of a given function is
over, the indicators will go off, the cooling fan will turn off and you will
hear a one-second sound signal.
4. After pushing the PRESET key within 60 seconds you will be able
to select a function. If no function key is pushed within the given
60 seconds, the Heat milk function will be selected, as it is the rst
available automatic function.
Cancelling the time Preset function
1. The Preset function may be cancelled by pressing the Power on/off
button, which will result in turning off the cooker. After turning the device
on again, the settings will be back to the default.
2. By pressing the MENU key and conrming the preset time, the cooker
will automatically go to the next automatic function without cancelling
the preset time.
CHILD LOCK mode
Both in automatic and manual modes to turn the Child Lock mode on press
and hold the CHILD LOCK key for 2 seconds. The mode indicator will
turn on (if you press the CHILD LOCK key before starting an automatic
or a manual mode, the indicator will remain off) and other functions will be
disabled. To unlock the cooker:
Press and hold the CHILD LOCK key for 2 seconds. The mode indicator
will go off and other functions will be again available.
Turn off and turn the cooker on again by pressing the Power on/off
button.
Both locking and unlocking the cooker will be accompanied by a sound
signal.
49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Zelmer 41Z012 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Zelmer 41Z012

Zelmer 41Z012 Bedienungsanleitung - Englisch, Polnisch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info