Bedienungsanleitung Zelmer Diana 887 (Seite 25 von 28) (Englisch, Polnisch)

538797

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

887-001_v01

Technical data

Technical parameters are given on the product’s data plate.

Allowed time of continuous work of the meat mincer

10 minutes

Required break before following use of the meat mincer

30 minutes

Noise level (L

): 77 dB/A

The appliance features double electrical insulation (Class II)

and does not require grounding.

ZELMER meat mincers meet the requirements of the

following applicable standards.

The meat mincer complies with the requirements of the

following directives:

Low voltage device (LVD) – 2006/95/EC. –

Electro-magnetic compatibility (EMC) – 2004/108/EC. –

The product has been marked with the CE mark on the data

plate.

Description

The meat mincer consists of:

Drive unit – each drive of the machine is adjusted to the

assembly of each of the mincing set and the shredder

produced by ZELMER. There are ventilation inlets inside

of the rear cavity of the 887 mo-tor compartment.

Switch

Lock button

Mincing set, which consists of:

Mincing chamber

Feed screw with assembled coupling

Double-side cutter

Screen with 4mm holes

ring collar

Food tray

Pusher

Equipment, which includes:

Screen with 8 mm holes

Screen with 2.7 mm holes

Sausage stuffer

Separator

Aperture plate

Disc

Noodles sieve

Vermicelli sieve

Pusher

Mechanical safety device for the motor

Scroll

Clutch

Screw M5x20

The meat mincer is equipped with mechanical protection,

which secures the motor against any damage – teeth of

the coupling break, when the meat mincer is overloaded

(f. ex. when bones have entered into the mincing chamber).

The broken coupling should be replaced with a new one:

unscrew the coupling from the feed screw,

●

remove the broken coupling,

●

put on the new coupling and screw it.

●

Preparing the meat mincer to work

and the actuation of the appliance

Take out a sufcient length of the supply cord and the

appropriate accessories from the compartment.

Place the drive unit close to the power network socket,

on a rm surface so as not to cover the ventilation holes

within the casing.

Before the rst use of the meat mincer, wash the

●

equipment elements.

Assemble the appropriate equipment and join it with the

●

drive unit.

Put the power cord into the supply network socket.

Turn the meat mincer on with the main switch.

TYPES OF ZELMER MEAT MINCERS

Below, you can see an assortment of equipment anticipated for the meat mincers, which the user manual refers to.

Type

Accessories

Mincer unit No. 5 Mincer unit No. 8 Pasta and pastry set Shredder Juicer

887.5

● ○ ● ○ ○

887.54

● ○ ○ ● ○

887.8

○ ●

–

○ ○

887.83

○ ●

–

● ●

887.84

○ ●

–

● ○

● – basic accessories, ○ – additional equipment, which can be bought in shops, household appliances stores,

–

– unavailable accessories

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer Diana 887 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zelmer Diana 887

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info