538897
70
Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
70 GW13-024_v01
12.8. Pour ground coffee by means of a measuring cup (13) or insert
espresso instant bags into the lter handle container (6).
12.9. Remove the excess of coffee from the edge of the lter and
compress the coffee by the permanent coffee compressor (5) or the
whip of the measuring cup (13) (Fig. 4).
12.10. Attach lter handle (6) to the brew head (4), by turning it with a rm
motion to the right (Fig. 3).
12.11. Place a cup or cups on the drip tray grid (7), directly under the brew
head (4).
12.12. Select program P1 or P2 by pressing the coffee amount select
button (C). After each push you will hear a sound signal.
12.13. Press and hold the single/double cup select button (B) and
temperature select button (D) for 2 seconds. P1 or P2 indicator
will ash on the display panel.
12.14. Select temperature setting (see paragraph 9), choose espresso
instant bags mode or ground coffee mode (see paragraph 10) and
the single cup ( indicator) or double cup ( indicator)
select button (B).
12.15. Push the brew coffee button (F). and espresso will come
out of the machine. The display panel will indicate (after
choosing a double cup) or (after choosing a single cup). After
getting the coffee release the brew coffee button (F). You will
hear two sound signals and the display panel will indicate or
.
12.16. After saving the settings P1 or P2 indicator will stop ashing and
you will hear a sound signal.
12.17. Remove the lter handle by turning it to the left (Fig. 5) and throw
out the used bag or coffee grounds (Fig. 6). Clean the lter with
water (Fig. 7).
CAUTION! While holding the brew coffee button (F) remember
that after when a single cup is lled to the maximum (ca. 240 ml), the
machine will automatically stop the brewing process (you will hear
two sound signals) and save the settings.
CAUTION! During programming pay attention if the P1 or P2
indicator are ashing. If they stop ashing for any reason the P1
or P2 stops ashing, start programming mode again by pressing
and holding both the single/double cup select button (B) and
temperature select button (D) for 2 seconds and follow the steps
up to paragraph 11.16.
CAUTION! In order to delete the program P1 or P2 settings press
and hold both the temperature select button (D) and the steam
select button (E).
13. Making espresso using the memory function
13.1. Unplug the espresso machine from the power supply.
13.2. Fill the water tank (1) according to paragraph 4.
13.3. Plug the espresso machine by putting the cord into the socket.
The machine will turn on. The display panel and the power on/off
button (A) will ash. The display panel will indicate power is
on .
13.4. Push the power on/off button (A), You will hear a sound signal.
13.5. The indicator on the display panel will begin to whirl, signalizing
that the espresso machine is heating up.
13.6. When the indicator stops whirling, you will hear a sound signal
informing you that the machine is ready for use (has reached the
right temperature).
13.7. Select program P1 or P2 by pressing the coffee amount select
button (C) – see paragraph 8.
13.8. Depending on which coffee mode (ground or instant bags) has
been programmed for P1 or P2, pour ground coffee by means of
a measuring cup (13) or insert espresso instant bags into the lter
handle container (6).
13.9. Remove the excess of coffee from the edge of the lter and
compress the coffee by the permanent coffee compressor (5) or the
whip of the measuring cup (13) (Fig. 4).
13.10. Attach lter handle (6) to the brew head (4), by turning it with a rm
motion to the right (Fig. 3).
13.11. Place a cup or cups on the drip tray grid (7), directly under the brew
head (4).
13.12. Push the brew coffee button (F) and espresso will come out of
the machine. The display panel will indicate (after choosing
a double cup) or (after choosing a single cup).
13.13. The brewing process will be automatically stopped at the desired
amount of coffee. You will hear two sound signals and the display
panel will indicate or (depending on the settings of
program P1 or P2).
13.14. Remove the lter handle by turning it to the left (Fig. 5) and throw
out the used bag or coffee grounds (Fig. 6). Clean the lter with
water (Fig. 7).
14. Making hot water
Hot water mode is perfect for making e.g. hot chocolate, lling up a piston
coffee pot or a teapot.
14.1. Unplug the espresso machine from the power supply.
14.2. Fill the water tank (1) according to paragraph 4.
14.3. Plug the espresso machine by putting the cord into the socket.
The machine will turn on. The display panel and the power on/off
button (A) will ash. The display panel will indicate power is
on .
14.4. Push the power on/off button (A), You will hear a sound signal.
14.5. The indicator on the display panel will begin to whirl, signalizing
that the espresso machine is heating up.
14.6. When the indicator stops whirling, you will hear a sound signal
informing you that the machine is ready for use (has reached the
right temperature).
14.7. Push the steam select button (E). You will hear a sound
signal. The display panel will indicate informing that the
steam mode has been turned on. Push the steam select button
(E) again. You will hear a sound signal and the display panel
will indicate .
14.8. The indicator on the display panel will begin to whirl, signalizing
that the espresso machine is heating up.
14.9. When the indicator stops whirling, you will hear a sound signal
informing you that the machine is ready for use (has reached the
right temperature).
14.10. Put a container under the steam nozzle (10) and turn the steam
control (12) to position , i.e. turn it counterclockwise, so the
sign will cover the casing of the espresso machine. Hot
water will come out of the nozzle (10).
14.11. To turn the water off turn the steam control (12) to OFF, position,
i.e. turn it clockwise, so the sign OFF will cover the marker on the
casing of the espresso machine.
14.12. To end working with the hot water mode on, press power on/off
button (A). You will hear a sound signal. The indicator will
go off from the display panel, informing that the espresso machine
is back to the coffee brew mode.
CAUTION! If there is not enough water in the water tank (1), the nozzle
(10) will not produce hot water. The indicator will ash on the
display panel and you will hear a repeating sound signal informing
you about the necessity to ll in water. Make sure to turn the water
off turn the steam control (12) to OFF position, i.e. turn it clockwise,
so the sign OFF will cover the marker on the casing of the espresso
machine. Open the water tank cover (1) and pour in the water. After
replenishing water, the sound signal will stop. To continue with the
hot water mode turn the steam control (12) to position , i.e.
turn it counterclockwise, so the sign will cover the casing of
the espresso machine.
CAUTION! Moving the steam/hot water nozzle (10) is possible only by
means of a special attachment (Fig. 9). The steam/hot water nozzle
(10) is extremely hot.
70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Zelmer Nerro Plus 13Z016 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info