Bedienungsanleitung Zelmer Odyssey 450.0 SP (Seite 48 von 50) (Englisch, Polnisch)

539675

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

OUTLET FILTER

The vacuum cleaners are equipped with an outlet lter ACF

Microlter or H11 Class HEPA (High Efciency Particulate

Air) lter depending on the type of the vacuum cleaner. The

HEPA lter is a high-quality lter produced from special bers

which are able to stop almost all dust particles. The H11

Class indicates the permeability of the lter. The H11 HEPA

lter stops 95.5% of particles as small as 0.3 micron.

In order to replace the outlet lter, open the accessory

compartment.

Press rmy the blocking mechanism of the outlet lter

cover and remove the cover out of the vacuum cleaner.

Remove the outlet lter cassette, replace the used

cassette with new one. The HEPA lter assure circa 1 year of

effective usage.

Place the outlet lter cover back on in such a way that

the three cogs on the lower side of the cover t into the holes

in the vacuum cleaner housing. Next press the lter cover

until the blocking mechanism closes hut. If you do it right,

you will hear a characteristic “click” sound.

Close the accessory compartment.

●

SAFBAG dust bag disassembly/assembly

The vacuum cleaner is equipped with safety valve located

in chamber of dust container (bag). It opens automatically

in case of total stopping of suction hose or total stopping of

equipment elements connected thereto, as well as in case

of overll of dust bag. After opening the valve one can hear

characteristic “whirr” sound inside the vacuum cleaner.

Switch off the vacuum cleaner by pressing the on/off

button (2).

Unplug the appliance.

Pull the end of the hose out of the inlet opening of the

vacuum cleaner.

Release the front cover fastening (8) and open the

cover.

Put the vacuum cleaner in a vertical position (it is easier

to open and put it on its back wheels, while its second half

leans over the front part of the dust container).

While holding the bag plate, pull it aside towards the

inside of the dust container, and then pull the bag up.

Close the SAFBAG bag cap, as to close the full bag.

Throw it out.

Place the plate in the new bag before the sliders and

slide it in along with the screen right down to the bottom of

the container. Unfold the bag. The direction is shown by an

arrow placed on the bag.

Close the cover until you hear the characteristic clicking

sound – be careful not to catch the bag.

ATTENTION! Do not start cleaning without an installed

SAFBAG bag.

ZELMER vacuum cleaners are equipped with SAFBAG dust

bags in the amount indicated in the table. It is recommended

to replace the dust bag if:

a) the safety valve activates,

b) the vacuum cleaner operates poorly,

c) the dust bag is full.

Special accessories

The following special accessories may be purchased in retail

outlets:

Zelmer turbobrush (21)

May be used with all types of ZELMER vacuum cleaners. Is

used for an effective vacuuming of carpets and tted carpets.

While using the turbobrush follow the instruction manual.

The use of the turbobrush decidedly increases the

effectiveness of removing brous dirt such as: animal hair,

hair, threads etc. It is practically useful in households with

pets (cats, dogs), where removing the animal hair from the

carpets and oorings is very onerous.

Zelmer electrobrush (22)

Only the electrobrush manufactured by ZELMER may be

used with ZELMER vacuum cleaners. Using other brands of

electrobrushes may cause damage to the vacuum cleaner.

The electrobrush may be used with all ZELMER vacuum

cleaners equipped with the appropriate electrobrush socket.

While using the electrobrush follow the instruction manual.

The electrobrush is especially helpful in cleaning worn out

carpets. Before vacuuming remove all larger elements from

the oor such as: remains of cloth, paper etc. in order to

prevent blocking of the whirling element of the brush.

End of operation cleaning and

maintenance

Switch off the vacuum cleaner by pressing the “on/off”

button (2).

Unplug the appliance.

Wind the cord by pressing the cord rewind button (4).

While doing this hold the cord to make sure it is not tangled

and the plug does not hit the vacuum cleaner housing.

Disconnect the suction tube from the suction nozzle or

brush.

Disconnect the suction tube from the hose. In order

to remove the telescopic tube from the hose handle,

simultaneously press the lock A and pull the tube in the

direction indicated by the arrow.

Pull the end of the hose out of the inlet opening of the

vacuum cleaner.

The vacuum cleaner may be stored vertically or

horizontally. In order to do so, insert the fastening hook of

the combination brush to the combination brush fastener.

The hose may be attached to the vacuum cleaner, however

you have to make sure that it is not excessively bent during

storing.

If necessary wipe the housing and the dust bag container

with a damp cloth (it may be soaked with dishwashing liquid)

and dry it or wipe until dry.

Do not use abrasive detergents or solvents.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer Odyssey 450.0 SP Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info