Bedienungsanleitung Zibro Kamin SRE227E (Seite 11 von 15) (Englisch)

564078

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Without the ‘SAVE’ setting your heater will maintain the set temperature by

approximation as well, by adjusting its heating capacity. ‘SAVE’ is an economy

setting, which you can use when, for instance, you are not present in the room

or to keep it frost-free.

K THE ‘FUEL’ INDICATOR

When the FUEL indicator appears, there is enough fuel left for another 10 minutes

of heater use. The count-down of the remaining heating time can be seen in the

information display ¸ (Fig. J). Every two minutes an alarm signal is sounded,

warning you to refill the removable tank. If you do not react, the heater will

extinguish by itself. The heater will also sound a warning signal, when it switches

off. The FUEL indicator will blink, while four lines are blinking in the information

display. You can stop this by pressing the

button ¹ once.

Once the heater has used up all its fuel and is extinguished it will take some time,

after the refill, before the heater is completely ready for use again.

L THE ‘VENT’ INDICATOR

When there is insufficient ventilation in the room, an intermittent buzzer will

be heard (approximately once each 30 seconds) and the VENT indicator will be

lit. When this signal is given, ensure that the ventilation of the room is improved

(e.g. by opening a door or window a little more), to avoid that the heater shuts

off. When the ventilation of the room is improved, the VENT indicator and buzzer

will be deactivated. When there is still insufficient ventilation, the heater shuts off

automatically. When this occurs, e -1 1 is displayed and the VENT indicator is blinking.

After improving the ventilation of the room (e.g. by opening a door or window a

little more), the heater can be ignited by pushing the

button ¹ again.

M MAINTENANCE

Switch off the heater and let it cool down, before you start any maintenance

work. Also disconnect the plug from the mains. Your heater needs hardly any

maintenance. It is, however, important that you clean the vent filter ᕨ with a

vacuum cleaner and the grid ᕢ with a damp cloth, both on a weekly basis.

Regularly inspect the fuel filter as well:

Remove the removable tank ᕦ from the heater and remove the fuel filter

(Fig. L). Some drops may leak from the filter; keep a cloth at hand.

Remove the dirt by tapping the fuel filter upside-down against a hard surface.

(Never clean it with water!)

Reinstall the fuel filter into the heater.

We recommend that you remove dust and stains from time to time with a damp

cloth, because otherwise these may cause stains that are hard to remove.

Do not remove any heater components yourself. Always contact your dealer

for repairs. When the power cord is damaged, it may only be replaced by an

authorised fitter. Use a new cord of the type H05 VV-F.

Fuel filter

J: When the FUEL

indicator has appeard,

the information display

will show the number of

minutes of fuel left in

the tank.

K: A blinking VENT

indicator is a sign

that you need extra

ventilation.

p052_061_SRE227E_uk.indd 59 19-06-12 15:48

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zibro Kamin SRE227E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zibro Kamin SRE227E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info