666164
144
Zoom out
Zoom in
Vorherige Seite
1/156
Nächste Seite
143
Reference / MTR mode eect types and parameters
MTR mode eect types and parameters
EFX modules
Compressor/limiter eects
RackComp
Compressors reduce high-level signals and raise the
minimum level.
(1) THRSHOLD 0–50
Sets the base level from which the compressor
operates.
(2) RATIO 1–10
Sets the compression ratio.
(3) ATTACK 1–10
Sets how quickly compression starts.
(4) LEVEL 2–100
Sets the level of the signal after the EFX module.
LIMITER
Limiters compress when input signals exceed the xed
level.
(1) THRSHOLD 0–50
This sets the base level from which the limiter
operates.
(2) RATIO 1–10
Sets the compression ratio.
(3) RELEASE 1–10
Sets how quickly the limiter stops functioning
after the signal goes below the base level.
(4) LEVEL 2–100
Sets the level of the signal after the EFX module.
Modulation eects
AUTO WAH
This wah eect responds to changes in input signal
strength.
(1) POSITION
Before,
After
Sets the insertion point of the EFX module.
Select before or after the PREAMP.
(2) SENSE
−10–−1,
1–10
Sets the eect sensitivity.
(3) RESONANC 0–10
Sets the amount of resonance.
(4) LEVEL 2–100
Sets the level of the signal after the EFX module.
PHASER This eect varies the sound with phasing.
(1) POSITION
Before,
After
Sets the insertion point of the EFX module.
Select before or after the PREAMP.
(2) RATE
0–50,
(See P.146)
Adjusts the speed of modulation.
(3) COLOR
4STAGE,
8STAGE,
INVERT4,
INVERT8
Select the eect sound type.
(4) LEVEL 2–100
Sets the level of the signal after the EFX module.
TREMOLO This eect raises and lowers the volume cyclically.
(1) DEPTH 0–50
Adjusts the modulation depth.
(2) RATE
0–50,
(See P.146)
Adjusts the speed of modulation.
(3) WAVE
UP 0–9
DOWN 0–9
TRI 0–9
Select the modulation waveform from UP (rising
sawtooth), DOWN (falling sawtooth) and TRI
(triangle) types.
The higher the number, the more the wave peaks
are clipped, emphasizing the eect.
(4) LEVEL 2–100
Sets the level of the signal after the EFX module.
144

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Zoom H4nPro wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info